Searched for: +
(81 - 100 of 358)

Pages

document
Tan, C. (author), Wang, S. (author), Li, Shizhen (author), Liu, X. (author), Wei, Jia (author), Zhang, Kouchi (author), Ye, H. (author)
Owing to the outstanding physical properties of graphene, its biosensing applications implemented by the terahertz metasurface are widely concerned and studied. Here, we present a novel design of the graphene metasurface, which consists of an individual graphene ring and an H-shaped graphene structure. The graphene metasurface exhibits a dual...
journal article 2022
document
Qiu, Xiujiao (author), Chen, J. (author), Ye, G. (author), De Schutter, Geert (author)
A 3D reactive transport model at microscale is proposed for simulating the chemical reaction process of alkali silica reaction (ASR) thermodynamically and kinetically including the dissolution of reactive silica, the nucleation and growth of ASR products and the dissolution of calcium hydroxide (CH) and calcium silicate hydrate (C-S-H) as a...
journal article 2022
document
Tan, C. (author), Zhou, Quan (author), Liu, X. (author), Zhang, Kouchi (author), Ye, H. (author), Wu, Qibao (author)
Combining the first principles calculations and the non-equilibrium Green’s function formalisms, we decipher the structural, electronic, and transport properties of boron phosphide (BP) with hydrogenation. Hydrogenated BP monolayer is an indirect semiconductor with a wide-bandgap of 3.76 eV that is favorable in power devices. We find that the...
journal article 2022
document
Sun, Beibei (author), Sun, Yubo (author), Ye, G. (author), De Schutter, Geert (author)
In this paper, a series of experiments were conducted to systematically and quantitively explore the effects of control factors on the early age properties, i.e., workability and strength of slag and fly ash-based alkali-activated paste (BFS/FA-AAP). The control factors on the workability (flowability and setting time) of BFS/FA-AAP include...
journal article 2022
document
Chen, Jing (author), Liu, X. (author), Zeng, Xiao Liang (author), Ye, Huai Yu (author), Zhang, Kouchi (author)
Hexagonal boron nitride (BN) is often used as filler to improve the thermal conductivity of polymer matrix due to its high thermal conductivity. However, previously reported BN-based composites always have a high in-plane thermal conductivity, which is not beneficial for vertical heat dissipation. In addition, high BN content results in the...
journal article 2022
document
Li, Shizhen (author), Liu, Yang (author), Ye, H. (author), Liu, X. (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, Kouchi (author)
This paper studied the behaviors of sintering between Ag nanoparticle (NP) and nanoflake (NF) in the same size by molecular dynamics simulation. Before the sintering simulation, the melting simulation of NF was carried out to calculate the melting points of NFs and investigate the thermostability of NF. The Lindemann index and potential...
journal article 2022
document
Ye, G. (author), Fan, X. (author), Zhang, Kouchi (author)
In this paper, we presented several practical aspects for building robust and reliable finite element models in thermomechanical modeling in electronics packaging using finite element analysis. Firstly, for layered or patterned structures, a homogenized equivalent model, with equivalent orthotropic material properties, gives excellent...
journal article 2022
document
Xu, H. (author), Tian, Zhan (author), Sun, Laixiang (author), Ye, Qinghua (author), Ragno, E. (author), Bricker, J.D. (author), Tan, Jinkai (author), Ke, Q. (author), Wang, Shuai (author)
Compound flooding is generated when two or more flood drivers occur simultaneously or in close succession. Multiple drivers can amplify each other and lead to greater impacts than when they occur in isolation. A better understanding of the interdependence between flood drivers would facilitate a more accurate assessment of compound flood risk...
journal article 2022
document
Qiu, Xiujiao (author), Chen, J. (author), Ye, G. (author), De Schutter, Geert (author)
Prediction of alkali silica reaction is still difficult due to the lack of a comprehensive understanding of its chemical fundamentals. In-site experimentally revealing the fundamentals is not realistic as ASR shows over several years or even decades and is affected by many factors. In this paper, by utilizing a 3D reactive-transport...
journal article 2022
document
Wang, Xiao Lin (author), Zhong, Yuanguang (author), Li, L. (author), Xie, Wei (author), Ye, Zhi Sheng (author)
Problem definition: Warranty reserves are funds used to fulfill future warranty obligations for a product. In this paper, we investigate the warranty reserve planning problem faced by a manufacturing firm who manages warranties for multiple products. Academic/practical relevance: It is nontrivial to determine a proper amount of reserves to...
journal article 2022
document
Li, Z. (author), Liang, X. (author), Liu, C. (author), Liang, M. (author), van Breugel, K. (author), Ye, G. (author)
This study investigates the deformation of free and stress of restrained alkali-activated slag concrete (AASC), respectively, under semi-adiabatic condition. The concrete shows first thermal expansion, which is compensated soon by autogenous shrinkage. The subsequent cooling down of the concrete aggravates shrinkage and development of tensile...
journal article 2022
document
Ye, Guigen (author), Fan, X. (author), Middelburg, L.M. (author), el Mansouri, B. (author), Poelma, René H. (author), Zhang, Kouchi (author)
In this paper, stability and mechanistic simulations for a four-beam-mass-based MEMS gravimeter were conducted, and guidelines for the gravimeter design were proposed. Based on a prototyped MEMS device, the nonlinear finite element model was validated first against the experimental results. Then, we demonstrated three different scenarios in...
journal article 2022
document
Sun, Yubo (author), Tao, Yaxin (author), Rahul, A. V. (author), Ye, G. (author), De Schutter, Geert (author)
The rapid workability loss of alkali-activated materials (AAM) has been a major obstacle limiting its onsite application. In this study, two conventional SPs (made of polynaphthalene sulfonate (PNS) and lignosulfonate (LS) salts), which have been reported to be effective in some specific AAM mixtures were separately applied in alkali...
journal article 2022
document
Avet, François (author), Li, Xuerun (author), Ben Haha, Mohsen (author), Bernal, Susan A. (author), Bishnoi, Shashank (author), Cizer, Özlem (author), Cyr, Martin (author), Ye, G. (author), Zhang, Shizhe (author)
The results of phase 1 of an interlaboratory test, coordinated by the RILEM TC 267-TRM “Tests for Reactivity of Supplementary Cementitious Materials” showed that the R<sup>3</sup> (rapid, relevant, reliable) test method, by measurement of heat release or bound water, provided the most reliable and relevant determination of the chemical...
journal article 2022
document
Gao, Peng (author), Ye, G. (author), Huang, Haoliang (author), Qian, Zhiwei (author), Schlangen, E. (author), Wei, Jiangxiong (author), Yu, Qijun (author)
A structure-based modelling framework was established to simulate the three-dimensional autogenous shrinkage of cement paste. A cement hydration model, HYMOSTRUC3D-E, was used to obtain the microstructures and ionic concentrations of the cement paste. A lattice fracture model based on the effective stress and effective modulus was used to...
journal article 2022
document
Sherzer, G. Lifshitz (author), Ye, G. (author), Schlangen, E. (author), Kovler, K. (author)
It has been observed that a trench wall embedded in the soil of the Dead Sea has lost strength and is deteriorating due to brine attack. This phenomenon demonstrates that concrete wall structural stability and durability can be seriously endangered. Yet conventional analysis using macroscopic models is considered an oversimplification, as it...
journal article 2022
document
Li, Shizhen (author), Liu, X. (author), Fan, Jiajie (author), Tan, C. (author), Wang, S. (author), Xie, Bin (author), Ye, H. (author)
The wide-bandgap semiconductors represented by GaN have a broad application prospect because of their high service temperature and high switch frequency. Quad-Flat-No-Lead (QFN) Package is currently one of the mainstream packaging methods due to its low cost and high efficiency. However, the low reliability of QFN used in GaN devices is still...
conference paper 2022
document
Sun, Yubo (author), Chen, Boyu (author), Zhang, Shizhe (author), Blom, Kees (author), Luković, Mladena (author), Ye, Guang (author)
In recent years, the rapid industrialization and urbanization led to the explosive growth of municipal solid waste incineration (MSWI) bottom ashes (BA) production. However, most of them are directly landfilled, which not only brings environmental burden but also results in loss of potential resources. Present researches have proved that MSWI BA...
conference paper 2021
document
Dong, H. (author), Yao, X. (author), Burgmann, S. (author), Ye, G. (author)
Each year a large amount of construction and demolition waste (CDW) is generated in the European Union. For sustainability development the CDW is recycled and re-used. To promote the use of CDW, recycled aggregates from CDW were incorporated in alkali-activated concrete (AAC), which mainly consisted of secondary materials or industrial by...
conference paper 2021
document
Li, Zhenming (author), Wyrzykowski, Mateusz (author), Dong, Hua (author), Zhang, Shizhe (author), Lura, Pietro (author), Ye, Guang (author)
Alkali activated slag (AAS) has shown promising potential to replace ordinary Portland cement as a binder material. Synthesized from industrial by-products, AAS can show high strength, thermal resistance and good durability. However, AAS has been reported to exhibit high autogenous shrinkage. Autogenous shrinkage is a critical issue for building...
conference paper 2021
Searched for: +
(81 - 100 of 358)

Pages