Recycling of Aluminosilicate-Based Solid Wastes through Alkali-Activation: Preparation, Characterization, and Challenges

Recycling aluminosilicate-based solid wastes is imperative to realize the sustainable development of constructions. By using alkali activation technology, aluminosilicate-based solid wastes, such as furnace slag, fly ash, red mud, and most of the bio-ashes, can be turned into alternative binder materials to Portland cement to reduce the carbon...

Antenna-in-Package (AiP) Using Through-Polymer Vias (TPVs) for a 122-GHz Radar Chip

High-performance IC-to-antenna interconnection is one of the key enablers for the mass production of high-end millimeter wave (mmW) radar systems above 100 GHz. In this work, a radar system with an on-package antenna array working at 122 GHz is presented. The antenna is placed on top of the molded package and the antenna-to-chip interconnection...

Effects of Ultrafine Blast Furnace Slag on the Microstructure and Chloride Transport in Cementitious Systems under Cyclic Drying–Wetting Conditions

This paper presents experimental investigations into the effects of ultrafine blast furnace slag on microstructure improvements against chloride penetration in saturated and unsaturated cementitious systems exposed to cyclic drying–wetting conditions. The hydration kinetics of ultrafine slag powders and pore solution chemistry in slag-blended...

A high responsivity and controllable recovery ultraviolet detector based on a WO₃gate AlGaN/GaN heterostructure with an integrated micro-heater

A high responsivity and controllable recovery ultraviolet (UV) photodetector based on a tungsten oxide (WO₃) gate AlGaN/GaN heterostructure with an integrated micro-heater is reported for the first time. The WO₃nanolayer was deposited by physical vapor deposition (PVD) for deep UV absorption and the micro-heater was...

Investigations of mixing technique on the rheological properties of self-compacting concrete

Rheological properties are of significant importance in successful placement and performance of self-compacting concrete (SCC). In this work, the rheological properties of SCC, combined with a powder-viscosity modifying admixture, were investigated based on a series of experimental studies. The modified Bingham model was applied to determine...

A review on the pumping behavior of modern concrete

Pumping is the most common technique used to transport fresh concrete in construction sites. The large-scale use of concrete all over the world makes the pumping increasingly important. A wide variety of additives and admixtures are incorporated into modern concrete in order for sustainable development. The performance of modern concrete is...

Suppression of persistent photoconductivity AlGaN/GaN heterostructure photodetectors using pulsed heating

This paper demonstrates a method to reduce the decay time in AlGaN/GaN photodetectors by a pulsed heating mode. A suspended AlGaN/GaN heterostructure photodetector integrated with a micro-heater is fabricated and characterized under ultraviolet illumination. We have observed that the course of persistent photoconductivity was effectively...

Suspended tungsten trioxide (WO₃) gate AlGaN/GaN heterostructure deep ultraviolet detectors with integrated micro-heater

A suspended WO₃-gate AlGaN/GaN heterostructure photodetector integrated with a micro-heater is micro-fabricated and characterized for ultraviolet photo detection. The transient optical characteristics of the photodetector at different temperatures are studied. The 2DEG-based photodetector shows a recovery (170 s) time under 240 nm...

Lake seasonality across the Tibetan Plateau and their varying relationship with regional mass changes and local hydrology

The recent growth and deepening of inland lakes in the Tibetan Plateau (TP) may be a salient indicator of the consequences of climate change. The seasonal dynamics of these lakes is poorly understood despite this being potentially crucial for disentangling contributions from glacier melt and precipitation, which are all sensitive to climate,...