Hygrothermal effects on fatigue delamination behavior in composite laminates

Fatigue delamination growth (FDG) is an important failure in composite structures during their long-term operations. Hygrothermal aging can have significant effects on interlaminar resistance. It is therefore really necessary to explore FDG behavior in composite laminates with hygrothermal aging. Dynamic mechanical thermal analysis (DMTA),...

Interlaminar and intralaminar fracture resistance of recycled carbon fibre/PPS composites with tailored fibre/matrix adhesion

The production of advanced composites from recycled carbon fibres (rCFs) is critical for the sustainable development of carbon fibre industry. Herein, non-woven mats consisting of commingled rCFs and Polyphenylene-sulfide (PPS) fibres were compression moulded to manufacture rCF/PPS composites, with the fibre/matrix adhesion being tailored by...

Achieving superelasticity in additively manufactured Ni-lean NiTi by crystallographic design

Superelastic metallic materials possessing large recoverable strains are widely used in automotive, aerospace and energy conversion industries. Superelastic materials working at high temperatures and with a wide temperature range are increasingly required for demanding applications. Until recently, high-temperature superelasticity has only...

Fatigue delamination behavior in composite laminates at different stress ratios and temperatures

This study provides an investigation on mode I fatigue delamination growth (FDG) with fibre bridging at different R-ratios and temperatures in carbon-fibre reinforced polymer composites. FDG experiments were first conducted at different temperatures of R-ratios 0.1 and 0.5 via unidirectional double cantilever beam (DCB) specimens. A fatigue...

Building water quality deterioration during water supply restoration after interruption: Influences of premise plumbing configuration

Premise plumbing plays an essential role in determining the final quality of drinking water consumed by customers. However, little is known about the influences of plumbing configuration on water quality changes. This study selected parallel premise plumbing in the same building with different configurations, i.e., laboratory and toilet...

Image restoration algorithm for terahertz FMCW radar imaging

The terahertz frequency modulation continuous-wave (THz FMCW) imaging technology has been widely used in non-destructive testing applications. However, THz FMCW real-aperture radar usually has a small depth of field and poor lateral resolution, thus restricting the high-precision imaging application. This paper proposes a 150-220 GHz FMCW...

Spatial Resolution Matching of Microwave Radiometer Measurements Using Iterative Deconvolution with Close Loop Priors (ICLP)

Passive multifrequency microwave sensors frequently struggle with difficulties of nonuniform spatial resolution among multiple channels. The raw measurements in the land-sea transition zone are seriously contaminated. Conventional analytical deconvolution techniques suffer from the tradeoff between spatial resolution enhancement and noise...

In-situ damage mechanism investigation and a prediction model for delamination with fibre bridging in composites

Carbon-fibre reinforced composites are susceptible to delamination. Fibre bridging is an important shielding mechanism frequently observed in delamination. The presence of these bridging fibres can significantly increase interlaminar resistance, making it critical to represent this phenomenon for delamination characterization in composite...

Temperature-sensing performance of polymer-derived SiAlCN ceramics up to 1000 °C

Temperature sensors that can operate in high-temperature and harsh environments are highly desired. However, this is a great challenge for sensing materials to operate under extreme working conditions because of oxidation and/or corrosion at high temperature. In this study, polymer-derived SiAlCN ceramics were prepared as sensing materials to...

Secure Control for Cyber-Physical Systems under Malicious Attacks

This article investigates the secure control problem for cyber-physical systems when the malicious data are injected into the cyber realm, which directly connects to the actuators. Based on moving target defense (MTD) and reinforcement learning, we propose a novel proactive and reactive defense control scheme. First, the system (A,B) is...

Ca-modified Al–Mg–Sc alloy with high strength at elevated temperatures due to a hierarchical microstructure

Al-Mg alloys are normally prone to lose part of their yield and tensile strength at high temperatures due to insufficient thermal stability of the microstructure. Here, we present a Ca-modified Al–Mg–Sc alloy demonstrating high strength at elevated temperatures. The microstructure contains Al₄Ca phases distributed as a network...

Improved parameterization of snow albedo in Noah coupled with Weather Research and Forecasting: Applicability to snow estimates for the Tibetan Plateau

Snow albedo is important to the land surface energy balance and to the water cycle. During snowfall and subsequent snowmelt, snow albedo is usually parameterized as functions of snow-related variables in land surface models. However, the default snow albedo scheme in the widely used Noah land surface model shows evident shortcomings in land...

Revealing High Na-Content P2-Type Layered Oxides as Advanced Sodium-Ion Cathodes

Layered Na-based oxides with the general composition of NaxTMO2 (TM: transition metal) have attracted significant attention for their high compositional diversity that provides tunable electrochemical performance for electrodes in sodium-ion batteries. The various compositions bring forward complex structural chemistry that is decisive for...

Self healing of radiation-induced damage in Fe–Au and Fe–Cu alloys: Combining positron annihilation spectroscopy with TEM and ab initio calculations

Self healing of early stage radiation damage by site selective solute segregation is a promising approach to extend the lifetime of nuclear reactor components. In the present study, the creation and autonomous healing of irradiation-induced damage is investigated in pure Fe and high purity Fe–Au and Fe–Cu model alloys. To create radiation...

Interface chemistry of an amide electrolyte for highly reversible lithium metal batteries

Metallic lithium is a promising anode to increase the energy density of rechargeable lithium batteries. Despite extensive efforts, detrimental reactivity of lithium metal with electrolytes and uncontrolled dendrite growth remain challenging interconnected issues hindering highly reversible Li-metal batteries. Herein, we report a rationally...

Data based violated behavior analysis of taxi driver in metropolis in China

Violation probability of taxi drivers in metropolis is far more than that of normal drivers because they are labor-intensive, overconfident of self-driving skill, and always searching potential customers, sometimes even picking up or dropping off passengers randomly. In this paper, four types of violated behavior of taxi drivers in metropolis...

Near-infrared optical coherence tomography for the inspection of fiber composites

Optical coherence tomography (OCT) is a non-invasive imaging method, which allows the econstruction of three dimensional depth-resolved images with microscale resolution. Originally developed for biomedical diagnostics, nowadays it also shows a high potential for applications in the field of non-destructive testing (NDT). This work demonstrates...