Improving dike reliability estimates by incorporating construction survival

During construction of a dike, slope stability often reaches critical levels, due to the excess pore water pressures in the foundation. The loading condition during construction has similarities with the design conditions during flood loading. Not only in terms of the pore water pressures as the main driving force, but also in terms of...

Value of information of combinations of proof loading and pore pressure monitoring for flood defences

Spatial variability and limited measurements often result in low reliability estimates of geotechnical failure modes of dikes (i.e., earthen flood defences). Required dike reinforcements are usually not executed within a few years after inception, which enables efforts to improve reliability estimates by reducing uncertainty. Often decision...

Do all dike instabilities cause flooding?

One of the failure mechanisms of dikes is slope instability at the landward side. Often, one instability does not lead to flooding, and several successive instabilities are needed before the dike overtops, and erosion and breaching can occur, especially at lower water levels. In this paper we propose a method to estimate the probability of...

Value of Information of Structural Health Monitoring in Asset Management of Flood Defences

One of the most rapidly emerging measures in infrastructure asset management is Structural Health Monitoring (SHM), which aims at reducing uncertainty in structural performance by using monitoring equipment. As earthen flood defence structures typically have large strength uncertainties, such techniques can be particularly promising. However,...

Quantifying the failure probability of a canal levee

Polders in the Netherlands are protected from flooding by flood defence systems along main water bodies such as rivers, lakes or the sea. Inside polders, canal levees provide protection from smaller water bodies. Canal levees are mainly earthen levees along drainage canals that drain excess water from polders to the main water bodies. The...

Uncertainty in spatial average undrained shear strength with a site-specific transformation model

Transformation models are used to infer geotechnical properties from indirect measurements. A site-specific transformation model can be calibrated with direct and indirect measurements from a site. When such a model is used, then spatial variability, measurement errors and statistical uncertainty propagate into the uncertainty of the spatial...

Economic optimization of coastal flood defense systems

Coastal flood defense systems can consist of multiple lines of defense. In case of a system with a front and a rear defense (e.g. a storm surge barrier and levees), the front defense can improve the reliability of the rear defense by reducing the load on this rear defense. This paper develops a framework in order to assess whether including...