The lasting impact of formation cycling on the Li-ion kinetics between SEI and the Li-metal anode and its correlation with efficiency

Formation cycling is a critical process aimed at improving the performance of lithium ion (Li-ion) batteries during subsequent use. Achieving highly reversible Li-metal anodes, which would boost battery energy density, is a formidable challenge. Here, formation cycling and its impact on the subsequent cycling are largely unexplored. Through...

High dielectric filler for all-solid-state lithium metal battery

Lithium metal with its high theoretical capacity and low negative potential is considered one of the most important candidates to raise the energy density of all-solid-state batteries. However, lithium filament growth and its induced solid electrolyte decomposition pose severe challenges to realize a long cycle life. Here, dendrite growth in...

Author Correction: Quantification of the Li-ion diffusion over an interface coating in all-solid-state batteries via NMR measurements (Nature Communications, (2021), 12, 1, (5943), 10.1038/s41467-021-26190-2)

The original version of this article contained errors in Figure 3a and Figure 3f. In Figure 3a, the activation energies (Ea) were calculated using a log scale instead of a logarithm ln scale. In Figure 3f, the y-axis interval was not properly selected. The correct y-axis interval in Figure 3f and the numerical values of the activation energy...

High Stability of Methanol to Aromatic Conversion over Bimetallic Ca,Ga-Modified ZSM-5

The production of valuable aromatics and the rapid catalyst deactivation due to coking are intimately related in the zeolite-catalyzed aromatization reactions. Here, we demonstrate that these two processes can be decoupled by promoting the Ga/HZSM-5 aromatization catalyst with Ca. The resulting bimetallic catalysts combine high selectivity to...

An integrated approach to the key parameters in methanol-to-olefins reaction catalyzed by MFI/MEL zeolite materials

Identification of the catalyst characteristics correlating with the key performance parameters including selectivity and stability is key to the rational catalyst design. Herein we focused on the identification of property-performance relationships in the methanol-to-olefin (MTO) process by studying in detail the catalytic behaviour of MFI,...

Improving Li-ion interfacial transport in hybrid solid electrolytes

The development of commercial solid-state batteries has to date been hindered by the individual limitations of inorganic and organic solid electrolytes, motivating hybrid concepts. However, the room-temperature conductivity of hybrid solid electrolytes is still insufficient to support the required battery performance. A key challenge is to...

A Series of Ternary Metal Chloride Superionic Conductors for High-Performance All-Solid-State Lithium Batteries

Understanding the relationship between structure, ionic conductivity, and synthesis is the key to the development of superionic conductors. Here, a series of Li_3-3_xM₁₊_xCl₆ (−0.14 < x ≤ 0.5, M = Tb, Dy, Ho, Y, Er, Tm) solid electrolytes with orthorhombic and trigonal structures are...

Clarifying the Relationship between the Lithium Deposition Coverage and Microstructure in Lithium Metal Batteries

Improving the reversibility of lithium metal batteries is one of the challenges in current battery research. This requires better fundamental understanding of the evolution of the lithium deposition morphology, which is very complex due to the various parameters involved in different systems. Here, we clarify the fundamental origins of...

Quantification of the Li-ion diffusion over an interface coating in all-solid-state batteries via NMR measurements

A key challenge for solid-state-batteries development is to design electrode-electrolyte interfaces that combine (electro)chemical and mechanical stability with facile Li-ion transport. However, while the solid-electrolyte/electrode interfacial area should be maximized to facilitate the transport of high electrical currents on the one hand,...

A Direct View on Li-Ion Transport and Li-Metal Plating in Inorganic and Hybrid Solid-State Electrolytes

ConspectusDriven by the intrinsic safety and potential to achieve higher energy densities, solid-state Li-metal batteries are intensively researched. The ideal solid electrolyte should possess a high conductivity, should have electrochemical stability both toward the Li-metal anode and to high voltage cathodes, should suppress dendrites,...

High dielectric barium titanate porous scaffold for efficient Li metal cycling in anode-free cells

Li metal batteries are being intensively investigated as a means to achieve higher energy density when compared with standard Li-ion batteries. However, the formation of dendritic and mossy Li metal microstructures at the negative electrode during stripping/plating cycles causes electrolyte decomposition and the formation of electronically...

Revealing High Na-Content P2-Type Layered Oxides as Advanced Sodium-Ion Cathodes

Layered Na-based oxides with the general composition of NaxTMO2 (TM: transition metal) have attracted significant attention for their high compositional diversity that provides tunable electrochemical performance for electrodes in sodium-ion batteries. The various compositions bring forward complex structural chemistry that is decisive for...

Controlling the Lithium-Metal Growth to Enable Low-Lithium-Metal-Excess All-Solid-State Lithium-Metal Batteries

Solid-state lithium-metal batteries are considered to be promising candidates for next-generation high-energy density storage devices to power electrical vehicles. Critical challenges for solid-state lithium-metal batteries include the large morphological changes associated with the plating and stripping of lithium metal and decomposition of...

Revealing the Impact of Space-Charge Layers on the Li-Ion Transport in All-Solid-State Batteries

The influence of space-charge layers on the ionic charge transport over cathode-solid electrolyte interfaces in all-solid-state batteries remains unclear because of the difficulty to unravel it from other contributions to the ion transport over the interfaces. Here, we reveal the effect of the space-charge layers by systematically tuning the...

Novel high performance poly(p-phenylene benzobisimidazole) (PBDI) membranes fabricated by interfacial polymerization for H 2 separation

Membranes with high selectivity and permeance are needed to reduce energy consumption in hydrogen purification and pre-combustion CO ₂ capture. Polybenzimidazole (PBI) is one of the leading membrane materials for this separation. In this study, we present superior novel supported PBI (poly(p-phenylene benzobisimidazole), PBDI)...

Tandem Interface and Bulk Li-Ion Transport in a Hybrid Solid Electrolyte with Microsized Active Filler

In common hybrid solid electrolytes (HSEs), either the ionic conductivity of the polymer electrolyte is enhanced by the presence of a nanosized inorganic filler, which effectively decrease the glass-transition temperature, or the polymer solid electrolyte acts mostly as a flexible host for the inorganic solid electrolyte, the latter providing...

Revealing the relation between the structure, Li-ion conductivity and solid state battery performance for the argyrodite Li6PS5Br solid electrolyte

Based on its high Li-ion conductivity, argyrodite Li6PS5Br is a promising solid electrolyte for all-solid-state batteries. However, more understanding is required on the relation between the solid electrolyte conductivity and the solid-state battery performance with the argyrodite structure, crystallinity and particle size that depend on the...