Pages
- 1
- 2
- document
-
Liu, L. (author), Xie, F. (author), Popov, M. (author), Hao, Zhiguo (author), Lekić, A. (author)This article presents an accurate DC fault location method that applies parameter fitting. This technique first discusses the traveling wave (TW) propagation process in the decoupled line-mode network. We obtain the exact fault distance equation based on the analytical expressions for the wavefront of backward line-mode voltage TW. The adaptive...conference paper 2023
- document
-
Xie, F. (author), Liu, L. (author), Hao, Zhiguo (author), Lekić, A. (author), Popov, M. (author)Existing line protection methods for multi-terminal direct current (MTDC) systems are constrained by the placement and values of boundary elements. To overcome this limitation, this paper proposes a non-unit DC line protection method based on the normalized backward traveling waves (BTWs) of the 1-mode voltage. Firstly, this article studies...conference paper 2023
- document
-
Liu, S. (author), Shetgaonkar, Ajay (author), Popov, M. (author)The objective of this paper is to investigate the coordinative performance of different types of high voltage DC (HVDC) circuit breakers (CBs) in multi-terminal DC (MTDC) grids. Several different HVDC CB technologies are emerging as a solution for the protection of offshore MTDC grids. There is a need for coordinative operation between different...conference paper 2020
- document
-
Shetgaonkar, A.D. (author), Liu, Siyuan (author), Popov, M. (author)Direct current circuit breaker (DC CB) is the key component to provide reliable operation of Multi-terminal Direct Current (MTDC) system. Fast, effective and accurate DC CB models are needed for system-level studies. Due to large number of components in the DC CB, its detailed modeling is needed in order to simulate current interruption process...conference paper 2022
- document
-
Liu, S. (author), Geng, Yingsan (author), Popov, M. (author), Wang, Jianhua (author), Liu, Zhiyuan (author), Zhang, Bojian (author)The vacuum interrupter is used as the key component of an active DCCB due to its excellent interruption and dielectric recovery characteristics after current zero. The vacuum interrupter can only interrupt the fault currents below the limitation of a critical di/dt and TIV, otherwise it causes a reignition and the interruption failure. In...conference paper 2018
- document
-
Liu, L. (author), Lekić, A. (author), Popov, M. (author)Due to its excellent performance, VSC-based high voltage direct current (HVDC) power systems draw significant attention. They are being heavily used in modern industrial applications, such as onshore and offshore wind farms, and for interconnection between asynchronous networks. However, the traditional proportional-integral (PI) control...conference paper 2022
- document
-
Liu, Zhou (author), Mirhosseini, S.S. (author), Liu, L. (author), Popov, M. (author), Ma, Kaiqi (author), Hu, Weihao (author), Jamali, Sadegh (author), Palensky, P. (author), Chen, Zhe (author)To promote the integration of renewable energy resources into modern energy systems, high-voltage dc (HVdc) and circuit breaker (CB) technologies have become critical to achieving secure and efficient energy transmission. This article reviews the technical development of the related areas, compares diverse breaker concepts and topologies,...journal article 2022
- document
-
Yang, Zhe (author), Liu, Zhou (author), Zhang, Qi (author), Chen, Zhe (author), de Jesus Chavez, Jose (author), Popov, M. (author)The traditional fault control strategy of converter-interfaced renewable energy sources (CIRESs) may bring about a lower sensitivity level or misoperation of fault component-based directional elements. To overcome this problem, a new control scheme is proposed to adjust sequence impedance angles of CIRESs by computing suitable current...journal article 2023
- document
-
Liu, S. (author), Popov, M. (author), Belda, Nadew (author), Smeets, Rene (author), Liu, Zhiyuan (author)This paper deals with the development of an accurate finite-element model of an arrester to investigate the electrothermal and mechanical stress during dc current interruption. The comprehensive analysis performed on a ZnO surge arrester is supported by experiments during high-voltage dc circuit breaker current interruption. The performed...journal article 2022
- document
-
Sun, Mingyu (author), Liu, Gaoyuan (author), Popov, M. (author), Terzija, Vladimir (author), Azizi, Sadegh (author)The conventional Under Frequency Load Shedding (UFLS) scheme could result in unacceptably low frequency nadirs or overshedding in power systems with volatile inertia. This paper proposes a novel UFLS scheme for modern power systems whose inertia may vary in a wide range due to high penetration of renewable energy sources (RESs). The proposed...journal article 2021
- document
-
Shetgaonkar, A.D. (author), Liu, L. (author), Lekić, A. (author), Popov, M. (author), Palensky, P. (author)Meshed offshore grids (MOGs) present a viable option for a reliable bulk power transmission topology. The station-level control of MOGs requires faster dynamics along with multiple objective functions, which is realized by the model predictive control (MPC). This paper provides control, and protection design for the Modular Multilevel...journal article 2023
- document
-
Liu, L. (author), Lekić, A. (author), Popov, M. (author)The DC transmission line protection technology is crucial for the development of multi-terminal Voltage Source Converter (VSC)-based HVDC systems. This article proposes a robust non-unit traveling wave protection (TWP), which deals with the DC fault area identification and fault type discrimination for high impedance fault...journal article 2023
- document
-
Liu, L. (author), Popov, M. (author), van der Meijden, M.A.M.M. (author), Terzija, Vladimir (author)For the control of high-voltage dc (HVdc) systems, especially for that of the multiterminal HVdc (MTdc) systems, the voltage source converter (VSC) is a good option because of its high controllability. These days, different types of VSC converters have been realized such as the two/three level converter and modular multilevel converter....journal article 2017
- document
-
Liu, S. (author), Popov, M. (author)The main goal of the paper is the modelling of the mechanical direct current circuit breaker (DC CB) with active current injection that includes different circuit breaker characteristics. System level models provide adequate representation of the circuit breakers for system analysis studies. The performance characteristics of the DC CB in...journal article 2018
- document
-
Liu, L. (author), Liu, S. (author), Popov, M. (author)The widely acknowledged high-voltage direct current (HVDC) technology has now been accepted as a solution of connecting renewable energy sources. However, this technology is vulnerable when facing DC-side faults; due to<br/>the low DC impedance, the fault current can rise to an extremely high value in a short time. In addition, when building a...journal article 2018
- document
-
Liu, Lian (author), Liu, Zhou (author), Popov, M. (author), Palensky, P. (author), van der Meijden, M.A.M.M. (author)HVDC technologies are widely acknowledged as one of solutions for the interconnection of renewable energy resources with the main electric power grid. The application of the latest modular multi-level converter (MMC) makes power conversion much more efficient. Due to the relatively low impedance in a DC system, DC fault currents may rise to an...journal article 2020
- document
-
Azizi, Sadegh (author), Sun, Mingyu (author), Liu, Gaoyuan (author), Popov, M. (author), Terzija, Vladimir (author)Short-circuit faults close to either end of a transmission line, are normally cleared instantaneously by the distance relay at that end and after hundreds of milliseconds, i.e., in Zone 2 operating time, by the relay at the opposite end of the line. This sequential tripping can be accelerated on condition that a reliable communication link is...journal article 2019
- document
-
Liu, S. (author), Popov, M. (author), Mirhosseini, S.S. (author), Nee, Simon (author), Modeer, Tomas (author), Ängquist, Lennart (author), Belda, Nadew (author), Koreman, Kees (author), van der Meijden, M.A.M.M. (author)This paper deals with the modeling, hardware results and model validation by measurements of a VSC assisted resonant current (VARC) dc circuit breaker (CB) and the application within a future network by simulation. The newly emerging VARC dc CB can be used as a solution for the protection of offshore multi-terminal HVDC (MTDC) grids. In this...journal article 2020
- document
-
Liu, S. (author), Liu, Z. (author), de Jesus Chavez, Jose (author), Popov, M. (author)The main goal of the paper is the modeling of the mechanical circuit breaker (MCB) that can replicate the breaker characteristics in real time environment. The proposed MCB with active current injection is modelled for a system level, which provides adequate representation of the circuit breakers for system analysis studies. External current...journal article 2019
- document
-
Mirhosseini, S.S. (author), Liu, S. (author), de Jesus Chavez, Jose (author), Liu, Z. (author), Jamali, Sadegh (author), Popov, M. (author)In order to test protection performance of future multi-terminal HVDC grids where DC circuit breakers (DC CBs) play an important role, a DC CB model in real time test environment should be developed. It is well known that a DC CB needs to interrupt DC faults very quickly in order to avoid converter damages and to ensure security of supply....journal article 2020
Pages
- 1
- 2