Erosion Behavior of Sand-Silt Mixtures: Revisiting the Erosion Threshold

The erosion threshold, beyond which bed sediments start to move, is a key parameter describing sediment transport processes. For silt-dominated mixtures, in which the grain size is between sand and clay, existing experimental studies exhibit contradictory observations. That is, the erosion was either sand-like or clay-like, suggesting...

Fan-Out Panel-Level PCB-Embedded SiC Power MOSFETs Packaging

In this article, a novel fan-out panel-level printed circuit board (PCB)-embedded package for phase-leg silicon carbide (SiC) metal-oxide-semiconductor field-effect transistor (MOSFET) power module is presented. Electro-thermo-mechanical co-design was conducted, and the maximum package parasitic inductance was found to be about 1.24 nH at 100...

AdQSM: A New Method for Estimating Above-Ground Biomass from TLS Point Clouds

Forest above-ground biomass (AGB) can be estimated based on light detection and ranging (LiDAR) point clouds. This paper introduces an accurate and detailed quantitative structure model (AdQSM), which can estimate the AGB of large tropical trees. AdQSM is based on the reconstruction of 3D tree models from terrestrial laser scanning (TLS) point...

Dynamics of a Tidal Current System in a Marginal Sea: A Case Study of the Yellow Sea, China

Tidal currents belong to the main driving forces shaping the bathymetry of marginal seas. A globally unique radial sand ridge field exists in the South Yellow Sea off the central Jiangsu coast, China. Its formation is related to the distinctive “radial tidal current” pattern at that location. A generally accepted hypothesis is that the ...

A numerical Bayesian-calibrated characterization method for multiscale prepreg preforming simulations with tension-shear coupling

Carbon fiber reinforced plastics (CFRPs) are attracting growing attention in industry because of their enhanced properties. Preforming of thermoset carbon fiber prepregs is one of the most common production techniques of CFRPs. To simulate preforming, several computational methods have been developed. Most of these methods, however, obtain...

Deriving vegetation drag coefficients in combined wave-current flows by calibration and direct measurement methods

Coastal vegetation is efficient in damping incident waves even in storm events, thus providing valuable protections to coastal communities. However, large uncertainties lie in determining vegetation drag coefficients (C_D), which are directly related to the wave damping capacity of a certain vegetated area. One major uncertainty is...

Effective roughness height in high-concentrated flows

The effective roughness height is an important parameter in coastal sediment transport models. It has been extensively investigated in the past but few research results are related to the high-concentrated flows which often occur in a silty coast. A series of experiments has been carried out in a wave-current flume with silt-sized sediment...

Luminescence of Ce3+ at two different sites in ?-Sr2P2O7 under vacuum ultraviolet-UV and x-ray excitation

A series of Ce3+ doped ?-Sr2?2xCexNaxP2O7 phosphor compounds has been prepared using a high-temperature solid-state reaction technique. The luminescence properties under vacuum ultraviolet-UV and x-ray excitation were studied. Luminescence spectra reveal three UV-emitting peaks at about 310, 330, and 350 nm from which we conclude that Ce3+...