- document
-
van Oostrum, Matthijs (author), Liu, Jiayao (author), Li, Yishiqin (author), Hoek, Ruben (author), Yang, Yidong (author), He, Zhujun (author), Buysschaert, Axel (author), Xiao, Yazhi (author), Peng, Jiping (author), van Eijk, Saskia (author), Yang, Qiao (author)This publication is in response to the call of 2017 Bi-City Biennale of Urbanism\Architecture (Shenzhen) (UABB) “Cities, Grow in Difference”, from the perspective of urbanism: the synthesis of factors that collectively determine the spatial use of the city. <br/>This atlas is based on master graduation theses of Delft University of Technology ...book 2017
- document
-
Liu, X. (author), Tzimiris, G. (author), Li, J. (author), Scarpas, T. (author), Hofman, R. (author), Voskuilen, J. (author)In order to adequately characterize the fatigue response of the various membranes with surrounding multilayer surfacing layers on orthotropic steel decks and collect the necessary parameters for FE modeling, the details of the cyclic Membrane Adhesion Tester (MAT) are introduced. The fatigue damage in membrane interface is related to the amount...conference paper 2015
- document
-
The drag reduction effect of a semi-circular riblet-structured surface in a turbulent boundary layer is experimentally investigated using the micro-pillar shear stress sensor MPS3. The MPS3 sensor is a novel tool for the quantitative measurement of the wall-shear stress distribution and possesses a high spatial and temporal resolution. The...conference paper 2015
- document
-
Tzimiris, G. (author), Liu, X. (author), Scarpas, A. (author), Li, J. (author), Hofman, R. (author), Voskuilen, J. (author)Due to lightweight and flexibility, orthotropic steel deck bridges become popular the last decades but several problems were reported in relation to asphalt surfacing materials such as rutting, cracking, loss of bond between the surfacing system and steel deck. In the Netherlands a surfacing structure for orthotropic steel bridge decks mostly...conference paper 2013
- document
- Li, K. (author), Liu, W. (author), Markine, V.L. (author), Ma, L. (author) conference paper 2012
- document
-
Li, J. (author), Liu, X. (author), Scarpas, A. (author), Tzimiris, G. (author)Light weight orthotropic steel bridge decks have been widely utilized for bridges in seismic zones, movable bridges and long span bridges. In the last three decades, severe problems were reported in relation to asphaltic surfacing materials on orthotropic steel deck bridges. Earlier investigations have shown that the bonding strength of membrane...conference paper 2013
- document
-
Liu, X. (author), Scarpas, A. (author), Li, J. (author), Tzimiris, G. (author), Hofman, R. (author), Voskuilen, J. (author)In order to adequately characterize the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) are introduced. Analytical constitutive relations of the MAT device have been derived using the same...conference paper 2013
- document
-
Liu, X. (author), Scarpas, A. (author), Li, J. (author), Tzimiris, G. (author)In order to characterize adequately the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) have been introduced. Analytical constitutive relations of MAT device have been derived on the basis of...conference paper 2012
- document
-
Zhang, Jiyi (author), Li, Gang (author), Liu, Youzhi (author), Yin, Pengcheng (author), Yu, Jinyu (author), Shi, Zhifeng (author)Since the introduction of the concept of 3D cadastre, a great many of significant research results have been done. To promote the development of 3D cadatre, 3D cadastre working group sponsored by International Federation Surveyors (FIG) commissions 3 and 7 was organized by Delft University of Technology in 2001. This working group provides a...conference paper 2018
- document
- Li, Jinxuan (author), Liu, Shuxue (author), Zhao, Min (author), Teng, Bin (author) conference paper 2013
- document
-
Menenti, M. (author), Li, X. (author), Wang, J. (author), Vereecken, H. (author), Li, J. (author), Mancini, M. (author), Liu, Q. (author), Jia, L. (author), Li, J. (author), Kuenzer, C. (author), Huang, S. (author), Yesou, H. (author), Wen, J. (author), Kerr, Y. (author), Cheng, X. (author), Gourmelen, N. (author), Ke, C. (author), Ludwig, R. (author), Lin, H. (author), Eineder, M. (author), Ma, Y. (author), Su, Z.B. (author)Ten Dragon 3 projects deal with hydrologic and cryosphere processes, with a focus on the Himalayas and Qinghai – Tibet Plateau, but not limited to that. At the 1st Dragon 3 Progress Symposium in 2013 a significant potential for a better and deeper integration appeared very clearly and we worked out an overview of the ten projects identifying...conference paper 2015
- document
-
Li, J. (author), Liu, X. (author), Scarpas, A. (author), Tzimiris, G. (author)In the Netherlands an asphaltic surfacing structure for orthotropic steel bridge decks mostly consists of two structural layers. The upper layer consists of Porous Asphalt (PA) because of reasons related to noise hindrance. For the lower layer a choice between Mastic Asphalt (MA) or Guss Asphalt (GA), can be made. In this paper, a typical Dutch...conference paper 2012
- document
-
Pang, Min (author), Sun, Zhenping (author), Ji, Yanliang (author), Yang, Jingbin (author), Wang, Peiming (author), Xu, Yaling (author), Li, Huanhuan (author), Liu, Jiaying (author), Li, Fei (author)Characteristics of fly ash(FA) blended mortars (50%, 70% and 90%) at different curing ages (28 days and 180 days) under ammonium chloride solution(ACS) leaching were investigated. Mass loss under leaching, initial CaO content, Ca(OH)2 content(CH), content of chemical bonded water, and hydration degree of blended pastes were tested by XRF and DSC...conference paper 2021
- document
-
Zhu, Songfeng (author), Li, Xueyuan (author), Qu, Xinyi (author), Liu, Qi (author), Li, Z. (author)This paper proposes a linear quadratic controller based on particle swarm algorithm for the rear wheel control of four-wheel steering vehicle. Particle swarm optimization with fitness functions is used to optimize the coefficients of the weight matrix offline. The fuzzy rules following the controller is used if the road condition is terrible....conference paper 2022
- document
-
Wu, Yue (author), Liu, Xiuming (author), Li, Q. (author), Chen, Boxuan (author), Luo, Peng (author), Pronk, Arno (author), Mergny, Elke (author)By using inflatable moulds and then spraying cellulose-water mixture, one ice dome and two ice towers were built in Harbin in December 2016. During the whole process, form-finding of the inflatable moulds as well as the construction of these ice composite shell structures are very important for the final results.<br/>The mould for the ice dome...conference paper 2017
- document
-
Liu, Chaoyang (author), Li, Xueyuan (author), Liu, Qi (author), Yang, Fan (author), Li, Z. (author), Li, Mengkai (author)With the development of unmanned vehicle technology, unmanned vehicles have played a huge role in logistics transportation, emergency rescue and disaster relief, etc., so the research on unmanned vehicles is becoming more and more important. Road detection is an important part of environmental perception and an important factor in the...conference paper 2023
- document
-
Wang, Yiping (author), Li, Xueyuan (author), Liu, Qi (author), Li, Songhao (author), Luan, Tian (author), Li, Z. (author)The skid-steered vehicle has the advantages of simple structure and strong maneuverability. Its formation driving can effectively improve safety, reduce energy consumption and exert its benefits, and has wide application prospects in military and civilian fields. Differential skid steering has strong horizontal and vertical coupling...conference paper 2023
- document
-
Xue, Chaozhong (author), Dong, Y. (author), Liu, Jiaqi (author), Liao, Yijun (author), Li, Lingbo (author)Medical waste recycling and treatment has gradually drawn concerns from the whole society, as the amount of medical waste generated is increasing dramatically, especially during the pandemic of COVID-19. To tackle the emerging challenges, this study designs a reverse logistics system architecture with three modules, i.e., medical waste...conference paper 2023
- document
-
Xue, Chaozhong (author), Dong, Y. (author), Liu, Jiaqi (author), Liao, Yijun (author), Li, Lingbo (author)With social progress and the development of modern medical technology, the amount of medical waste generated is increasing dramatically. The problem of medical waste recycling and treatment has gradually drawn concerns from the whole society. The sudden outbreak of the COVID-19 epidemic further brought new challenges. To tackle the challenges,...conference paper 2023
- document
-
Hong, H. (author), Ye, Li (author), Li, Ke (author), Sarro, Pasqualina M (author), Zhang, Kouchi (author), Liu, Zewen (author)In this paper, we report a modified three step anisotropic wet etching (TSWE) method to fabricate solid-state silicon nanoslits. The slit-opening process is performed by <111> crystal plane etching. The etching rate of the <111> crystal plane is reasonably slow as it is only 1/45 of the <100> etching rate, thus allowing and...conference paper 2021