A modelling study of drying shrinkage damage in concrete repair systems

Differential shrinkage between repair material and concrete substrate is considered to be the main cause of premature failure of repair systems (Martinola, Sadouki et al. 2001, Beushausen and Alexander 2007). Magnitude of induced stresses depends on many factors, for example the amount of restraint, moisture gradients caused by different curing...

A 3D Lattice Modelling Study of Drying Shrinkage Damage in Concrete Repair Systems

Differential shrinkage between repair material and concrete substrate is considered to be the main cause of premature failure of repair systems. The magnitude of induced stresses depends on many factors, for example the degree of restraint, moisture gradients caused by curing and drying conditions, type of repair material, etc. Numerical...

Moisture movement in cement-based repair systems monitored by X-ray absorption

In concrete repair systems, material properties in the repair material and interface are greatly influenced by the initial moisture content of the concrete (or mortar) substrate. In order to quantify moisture profiles inside the repair system, X-ray absorption was used. Preliminary studies are performed first to determine the absorption rate of...

Failure Modes in Concrete Repair Systems due to Ongoing Corrosion

Corrosion of steel reinforcement is the main cause of deterioration in reinforced concrete structures. It can result in cracking and spalling of the concrete cover. After the damaged cover is repaired, reinforcement corrosion might continue and even accelerate. While the development of the corrosion cell is difficult to control, the damage can...

Modeling framework for fracture in multiscale cement-based material structures

Multiscale modeling for cement-based materials, such as concrete, is a relatively young subject, but there are already a number of different approaches to study different aspects of these classical materials. In this paper, the parameter-passing multiscale modeling scheme is established and applied to address the multiscale modeling problem...

Insights into the mechanisms of nucleation and growth of C–S–H on fillers

A complete understanding of the mechanisms upon which a filler acts in a cement-based material, e.g. as a C–S–H nucleation and/or growth-inducing factor, is of high importance. Although various studies report on accelerated cement hydration in the presence of fillers, the reason behind these observations is not completely understood yet. This...

Development and application of an environmentally friendly ductile alkali-activated composite

This paper presents a development of a ductile alkali-activated fly ash (FA) and ground granulated blast furnace slag (GBFS) based composite as an environmentally friendly material for structural concrete application. For this purpose, polyvinyl alcohol (PVA) fibres and sand aggregate were combined with alkali-activated paste. Workability,...

Strain-Hardening Cementitious Composite (SHCC) For Durable Concrete Repair

Infrastructure is ageing and we are facing a serious challenge on how to deal with it. One possible solution is to repair it, but the life of current concrete repairs, including all types of repairs and application of different materials, is not satisfactory and there is an urgent need for improvement. Understanding the damage development in a...

Thermal deformation and stress of alkali-activated slag concrete under semi-adiabatic condition: Experiments and simulations

This study investigates the deformation of free and stress of restrained alkali-activated slag concrete (AASC), respectively, under semi-adiabatic condition. The concrete shows first thermal expansion, which is compensated soon by autogenous shrinkage. The subsequent cooling down of the concrete aggravates shrinkage and development of tensile...

Interface bonding properties of polyvinyl alcohol (PVA) fiber in alkali-activated slag/fly ash

This paper presents an experimental study on the interface bonding properties of polyvinyl alcohol (PVA) fiber in alkali-activated slag/fly ash (AASF) pastes. Three interface bonding properties (i.e., the chemical bonding energy Gd, the initial frictional bond strength τ0, and slip-hardening behavior) were determined using single-fiber pullout...