Asphalt-rubber interaction and performance evaluation of rubberised asphalt binders containing non-foaming warm-mix additives

Warm mix asphalt (WMA) technology has been increasingly utilised in rubberised asphalt pavements to reduce the production and compaction temperatures and the incidental fumes and odours. This study aims to investigate the high, intermediate and low-temperature performance of crumb rubber modified asphalt binders containing WMA additives. The...

Comparison of Different Micromechanical Models for Predicting the Effective Properties of Open Graded Mixes

ZOAB (Zeer Open Asphalt Beton) is the most widely used asphalt mixture in the Netherlands. As a type of open asphalt mixture, it is known to suffer from raveling distress. In order to analyze the propensity of raveling, micromechanical models are considered effective. However, most of the research work about micromechanical models has focused...

Issues in the Prediction of the Mechanical Properties of Open Graded Mixes

Within the pavement engineering community, open graded mixes (OGM) are regarded as mixes capable of reducing noise and improving wet skid resistance. However, during their design life, these asphalt mixes are known to suffer from a particular distress type known as raveling. This results in a premature failure of a road network. In order to...

Effect of stone-on-stone contact on porous asphalt mixes: micromechanical analysis

Within the pavement engineering community, porous asphalt (PA) mixes are regarded as mixes capable of reducing noise and improving wet skid resistance. However, these mixes are likely to have the distress of ravelling. In order to analyse the propensity of a given PA mix for ravelling, the homogenisation technique can be considered as an...

Evaluation of Organosolv Lignin as an Oxidation Inhibitor in Bitumen

Organosolv lignin, a natural polymer, has been used in this study as an oxidation inhibitor in bitumen. Particularly, the effect of oxidative aging on the chemical compositional changes and on the rheology of bituminous binders with organosolv lignin and the impact to inhibit oxidation in bitumen were evaluated. Firstly, after analyzing the...

Simple Homogenization-Based Approach to Predict Raveling in Porous Asphalt

In the Netherlands, more than 80% of the highways are surfaced by porous asphalt (PA) mixes. The benefits of using PA mixes include, among others, the reduction of noise and the improvement of skid resistance. However, pavements with PA mixes are known to have a shorter lifetime and higher maintenance costs as compared with traditional dense...

Micromechanical modelling of complex shear modulus of crumb rubber modified bitumen

Crumb rubber modified bitumen (CRMB) can be considered as a binary composite system where rubber particles are embedded in the bitumen matrix. The bitumen-rubber interaction process (mainly swelling) significantly changes the mechanical properties of both bitumen and rubber phases. This study aims to predict the complex moduli of CRMB binders...

Micromechanics-based complex modulus prediction of crumb rubber modified bitumen considering interparticle interactions

Crumb rubber modified bitumen (CRMB) can be regarded as a binary composite system in which swollen rubber particles are embedded in the bitumen matrix. The current study aims to further improve the prediction accuracy of micromechanical models for CRMB by considering the interparticle interactions. To accomplish this goal, two different...

Understanding the Stiffness of Porous Asphalt Mixture through Micromechanics

Micromechanics, which can be used to relate the properties of a composite to the properties of individual constituents, is considered a good approach to understanding the fundamental mechanisms behind the behavior of asphalt materials. Compared with the semi-empirical and numerical micromechanical models, analytical micromechanical models do not...

Thermal aging behaviors of the waste tire rubber used in bitumen modification

Considering the application scenarios of rubber granules from waste tires in the bitumen modification process (wet or dry process), both aerobic and anaerobic aging of rubber may occur. The current study aims to investigate the thermal aging behavior of waste tire rubber samples using nanoindentation and environment scanning electron microscopy ...

Contact mechanics based solution to predict modulus of asphalt materials with high porosities

Asphalt mixtures with high porosities (known as porous asphalt (PA) mixes) are becoming a popular choice among road authorities as it provides better skid resistance while also reducing tire-pavement noises. Towards the design and manufacture of PA mix pavement, the evaluation of the mechanical properties of PA mixes is of great importance....

Micromechanics-based viscoelasticity predictions of crumb rubber modified bitumen considering polymer network effects

Crumb rubber modified bitumen (CRMB) can be regarded as a binary composite system in which swollen rubber particles are embedded in the bitumen matrix. Previous study has successfully implemented the micromechanics models in predicting the complex moduli of CRMB binders using more representative constituent parameters. In the regime of master...

Effect of Bio-oil on Rheology and Chemistry of Organosolv Lignin–Modified Bitumen

Lignin, one of the most abundant natural polymers, has been extensively studied as an additive in bituminous binders. Even though the lignin improves the overall resistance against oxidative aging of bitumen, it could lead to high thermal cracking sensitivity. In this study, a bio-oil (i.e., rapeseed oil) is implemented in lignin-modified...