Characterization, pre-treatment, and potential applications of fine MSWI bottom ash as a supplementary cementitious material

With the development of waste recovery techniques, previous research has revealed that coarse fractions of municipal solid waste incineration (MSWI) bottom ash (BA) after proper treatment could be applied in the construction sector, while the fines are seldom recovered in practice and normally landfilled. This study explores the potential...

Geopolymeerbeton voor infrastructurele toepassingen (1): Ontwikkeling van zelfverdichtende mengsels

In Nederland wordt veel aandacht besteed aan geopolymeerbeton als een van de mogelijkheden om de CO₂-voetafdruk van beton te verlagen. Hoewel dit materiaal op laboratoriumschaal uitgebreid is onderzocht, zijn praktische toepassingen en ervaringen nog maar beperkt beschikbaar. Bovendien bestaan er voor een brede en grootschalige constructieve...

Effects of bacteria-embedded polylactic acid (PLA) capsules on fracture properties of strain hardening cementitious composite (SHCC)

Strain hardening cementitious composite (SHCC) is a special class of ultra-ductile material which has autogenous self-healing capability due to its intrinsic tight crack widths. To further improve its healing ability, healing agent (HA) can be incorporated in SHCC, enabling it also the autonomous self-healing mechanism. In this study, the...

Potential application of MSWI bottom ash as substitute material in Portland cement concrete: Filler or binder

In recent years, the rapid industrialization and urbanization led to the explosive growth of municipal solid waste incineration (MSWI) bottom ashes (BA) production. However, most of them are directly landfilled, which not only brings environmental burden but also results in loss of potential resources. Present researches have proved that MSWI BA...

Cementitious cellular composites with auxetic behavior

Auxetic behavior refers to material with negative Poisson's ratio. In this research, a new type of cementitious auxetic material is developed. A novel crack bridging auxetic mechanism is discovered which is in contrast with a local buckling mechanism commonly employed to trigger auxetic behavior. Taking advantage of 3D printing techniques,...

Experimentally informed micromechanical modelling of cement paste: An approach coupling X-ray computed tomography and statistical nanoindentation

This work proposes a method for numerically investigating the fracture mechanism of cement paste at the microscale based on X-ray computed tomography and nanoindentation. For this purpose, greyscale level based digital microstructure was generated by X-ray microcomputed tomography with a resolution of 2 μm/voxel length. In addition,...

Pre-Treatments Of Mswi Bottom Ash For The Application As Supplementary Cementitious Material In Blended Cement Paste

At present, most municipal solid waste incineration (MSWI) bottom ash, as being disposed of as waste, is directly landfilled, raising concern about the environmental issue and potential loss of resources. Given that the natural raw materials used for cement production are being depleted, the recycling of MSWI bottom ash for the application as...

Microscale Testing and Modelling of Cement Paste as Basis for Multi-Scale Modelling

This work aims to provide a method for numerically and experimentally investigating the fracture mechanism of cement paste at the microscale. For this purpose, a new procedure was proposed to prepare micro cement paste cubes (100 × 100 × 100 µm3) and beams with a square cross section of 400 × 400 µm2. By loading the cubes to failure with a...