Strengthening effects evaluation on fatigue damage of rib to deck joint in orthotropic steel deck

Strengthening fatigue damage of orthotropic steel decks (OSDs) needs to comprehensively consider the strengthening effect and the dead weight introduced during the strengthening process, especially for OSDs in super large-span bridges or old renovated bridges, where the dead weight cannot be significantly increased during repair and...

FE-assisted investigation for mechanical behaviour of connections in offshore wind turbine towers

The overall competitiveness of offshore wind turbine towers is significantly influenced by the selection of the connection. The following three types of connections: a conventional bolted ring flange (RF) connection, ring flange connection with defined contact surfaces (RFD), and C1 wedge connection (C1-WC) are considered. A quantitative...

A macro prediction model for butt-welded (U)HSS connections with softened HAZ

This paper reports an investigation on the tensile resistance of fully-penetrated butt-welded connections of (ultra-)high-strength steels considering the strength softening of the heat-affected zone (HAZ) and the strengthening due to the transverse constraint. Firstly, a parametric study is carried out to analyse the tensile behaviour of...

The C1 wedge connection in towers for wind turbine structures, tensile behaviour of a segment test

This paper shows a part of the analysis of the development of the second generation of the C1 wedge connections for use in offshore wind turbine supporting towers. The novelty of this connection is that bolt failure is avoided under static and fatigue loads. This study aims to investigate the tensile behaviour of the connection by combining...

Equivalent material properties of the heat-affected zone in welded cold-formed rectangular hollow section connections

A welded connection consists of three main material zones, the base material (BM), the heat-affect zone (HAZ), and the weld metal (WM). The strength of HAZ depends on the BM grade and manufacturing process, electrode grade, and welding parameters. Under certain conditions, HAZ has the lowest material strength, especially for high-strength...

Shear performance of replaced bolt shear connectors in prefabricated composite beams

Bolt shear connectors have the advantage of efficient installation and demolition when used in prefabricated composite beams. When bolt shear connectors are damaged in the service period and replaced by new ones, the shear performance of replaced bolts is to be affected by the existing structural damage. This paper investigates the shear...

A method for determining the constitutive model of the heat-affected zone using digital image correlation

The heat-affected zone (HAZ) is an unmelted region of a welded joint that has changed in material properties because of high temperatures during the welding process. HAZ has a lower strength than the base (parent) material (BM) and the weld metal (WM). The lower material strength is more significant if BM is made of high strength steel and...

A method for identifying the boundary of regions in welded coupon specimens using digital image correlation

The coupon specimen with a transverse butt weld in the middle could be used for determining local constitutive properties of the heat-affected zone (HAZ) and the weld metal (WM) based on the digital image correlation (DIC). However, limited research is reported to demonstrate how to identify the boundary of each region in DIC results....

Fracture simulation of partially threaded bolts under tensile loading

Failure of bolts exposed to tension is generally avoided in the design of bolted connections due to the smaller deformation capacity of bolts than the connected plates. This is one of the reasons why few studies focus on the tensile failure behaviour of bolts. However, failure behaviour of bolts is essential for the advanced finite element...

Fracture simulation of a demountable steel-concrete bolted connector in push-out tests

Many bolted connectors were proposed for use in steel-concrete composite structures over the past few decades. This is because using bolted connectors could make the assembly and disassembly of steel-concrete composite structures more convenient and reusing the dismantled structural components could also improve structural sustainability. Lots...

Validation and application of bearing and block tearing resistance: Background to prEN1993-1-8:2021

An investigation of bolted connections with a specific geometry and bolt arrangement that require high local ductility to achieve the predicted resistances according to the design rules of the new prEN 1993-1-8 is presented. The experimental campaign includes tensile and shear tests on mild steel coupons to calibrate the parameters used for the...

Ductile damage model calibration for high-strength structural steels

Numerical analyses incorporating appropriate damage models provide an opportunity to predict the strength and deformation capacity of steel structures. This paper presents a practical calibration for the ductile damage model of S355 and high-strength steel S690Q, S700MC, S960Q based on tensile coupon test results. A combined linear and power...