Modified bond model for shear in slabs under concentrated loads

Slabs subjected to concentrated loads close to supports, as occurring for truck loads on slab bridges, are less studied than beams in shear or slab-column connections in punching. To predict the shear capacity for this case, the Bond Model for concentric punching shear was studied initially. Modifications to this model resulted in the Modified...

Predicting the shear capacity of reinforced concrete slabs subjected to concentrated loads close to supports with the modified bond model

The shear problem is typically studied by testing small, heavily reinforced, slender beams subjected to concentrated loads, resulting in a beam shear failure, or by testing slab-column connections, resulting in a punching shear failure. Slabs subjected to concentrated loads close to supports, as occurring when truck loads are placed on slab...

Practical application of transverse load redistribution in reinforced concrete solid slab bridges

For an initial design or assessment of a reinforced concrete solid slab bridge, spreadsheet-based or hand calculations are typically used. The shear stress is compared to the shear capacity as prescribed by the code. The distributed loads result in a uniform shear stress at the support. Concentrated loads are less straightforward to take into...

Effective width in shear of reinforced concrete solid slab bridges under wheel loads

Applying Experimental Results to the Shear Assessment Method for Solid Slab Bridges

The combination of increased live loads and a more conservative shear capacity in the recently implemented Eurocodes, resulted in a large number of existing solid slab bridges in the Netherlands being shear-critical upon assessment. However, an enhancement of the shear capacity can occur in slabs under concentrated wheel loads due to transverse...

Shear assessment of reinforced concrete slab bridges

The capacity of reinforced concrete solid slab bridges in shear is assessed by comparing the design beam shear resistance to the design value of the applied shear force due to the permanent actions and live loads. Results from experiments on half-scale continuous slab bridges are used to develop a set of recommendations for the assessment of...

Recommendations for the shear assessment of reinforced concrete slab bridges from experiments

Upon assessment of existing reinforced concrete short-span solid slab bridges according to the recently implemented Eurocodes that include more conservative shear capacity provisions and heavier axle loads, a number of these structures were found to be shear-critical. The results from recent experimental research on the shear capacity of slabs...

Assessment of the Shear Capacity of Existing Reinforced Concrete Solid Slab Bridges

Several existing reinforced concrete solid slab bridges in the Netherlands do not meet the criteria for shear when calculated according to the recently implemented Eurocodes. The shear capacity is assessed by comparing the design beam shear resistance to the design value of the applied shear force due to the dead load, permanent load and live...