Searched for: +
(1 - 20 of 98)

Pages

document
Martin, H.A. (author), Smits, Edsger C.P. (author), Poelma, René H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
This article introduces an online condition monitoring strategy that utilizes a transient heat pulse to detect package thermal performance degradation. The metric employed is the temperature-dependent transient thermal impedance "Zth(t, Tamb)."The proposed methodology offers quantitative insights into package thermal performance degradation...
journal article 2024
document
Du, L. (author), Deng, Shanliang (author), Cui, Z. (author), Poelma, René H. (author), Beelen-Hendrikx, Caroline (author), Zhang, Kouchi (author)
In this study, we combined finite element method (FEM) based on Ansys and Noesis Optimus software to investigate the effect of bump structures and loading conditions on the electromigration properties of solder bumps in WLCSP. A numerical model considering current density, vacancy concentration, stress and temperature was utilized to calculate...
conference paper 2024
document
Hu, D. (author), Wang, Chieh (author), Li, Z. (author), Gupta, N. (author), Poelma, René H. (author), Shi, Ziliang (author), Fan, J. (author), Zhang, Kouchi (author)
Driven by the increasing demand for high-power systems, ceramic substrates have received more attention for handling higher power density. Warpage in active metal brazed (AMB) ceramic substrate becomes a critical issue as it can deteriorate the reliability performance. This study comprises three phases, including investigation of the cause of...
conference paper 2024
document
Hu, X. (author), Huang, Jianlin (author), Poelma, René H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
Low-temperature sintering technology of Ag nanoparticles is widely used in high-power electronic device packaging. Utilizing simulation methods to comprehend and control the microstructure and properties of Ag sintering materials has emerged as a prominent research area. This work uses the General Form PDE module in COMSOL to simplify the...
conference paper 2024
document
Hogendoorn, W.J. (author), Breugem, W.P. (author), Frank, David (author), Bruschewski, Martin (author), Grundmann, Sven (author), Poelma, C. (author)
Magnetic resonance imaging (MRI) experiments have been performed in conjunction with direct numerical simulations (DNS) to study neutrally buoyant particle-laden pipe flows. The flows are characterized by the suspension liquid Reynolds number (Res), based on the bulk liquid velocity and suspension viscosity obtained from Eilers' correlation,...
journal article 2023
document
Nyns, Emile C.A. (author), Portero, Vincent (author), Deng, Shanliang (author), Jin, T. (author), Harlaar, Niels (author), Bart, Cindy I. (author), van Brakel, Thomas J. (author), Palmen, Meindert (author), Hjortnaes, Jesper (author), Ramkisoensing, Arti A. (author), Zhang, Kouchi (author), Poelma, René H. (author), Ördög, Balázs (author), de Vries, Antoine A.F. (author), Pijnappels, Daniël A. (author)
Background: Optogenetics could offer a solution to the current lack of an ambulatory method for the rapid automated cardioversion of atrial fibrillation (AF), but key translational aspects remain to be studied. Objective: To investigate whether optogenetic cardioversion of AF is effective in the aged heart and whether sufficient light...
journal article 2023
document
Martin, H.A. (author), Reintjes, Marcia (author), Reijs, Dave (author), Dorrestein, Sander (author), Kengen, Martien (author), Libon, Sebastien (author), Smits, Edsger (author), Tang, Xiao (author), Koelink, Marco (author), Poelma, René H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
Integrated Circuits and Electronic Modules experience concentrated thermal hot spots, which require advanced thermal solutions for effective distribution and dissipation of heat. The superior thermal properties of diamonds are long known, and it is an ideal material for heat-spreading applications. However, growing diamond films to the...
conference paper 2023
document
Du, L. (author), Zhao, Xiujuan (author), Poelma, René H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
SnBiAgCu solder alloy is an attractive soldering material for temperature-sensitive electronic devices due to its excellent creep properties. This study firstly reports the creep properties of SnBiAgCu solder alloy under different temperatures. Results show that the addition of Bi resulted in better creep resistance compared with that of...
conference paper 2023
document
Nagalingam, Nagaraj (author), Raghunathan, Aswin (author), Korede, V.B. (author), Poelma, C. (author), Smith, C.S. (author), Hartkamp, Remco (author), Padding, J.T. (author), Eral, H.B. (author)
We demonstrate that a cavitation bubble initiated by a Nd:YAG laser pulse below breakdown threshold induces crystallization from supersaturated aqueous solutions with supersaturation and laser-energy-dependent nucleation kinetics. Combining high-speed video microscopy and simulations, we argue that a competition between the dissipation of...
journal article 2023
document
Hu, X. (author), Martin, H.A. (author), Poelma, René H. (author), Huang, J.L. (author), Rijckevorsel, H. (author), Scholten, H. (author), Smits, E.C.P. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
Resin-reinforced silver (Ag) sintering material is an effective and highly reliable solution for power electronics packaging. The hybrid material’s process parameters strongly influence its microstructure and pose a significant challenge in estimating its effective properties as a thin interconnect layer. This research demonstrates a novel 3D...
conference paper 2023
document
Cornel, W.A. (author), Westerweel, J. (author), Poelma, C. (author)
Abstract: A novel experimental imaging-based method is presented for the non-intrusive determination of shock wave characteristics (i.e. shock wave speed and magnitude, and shock-induced liquid velocity) in a bubbly flow solely from gas bubble velocities. Shock wave speeds are estimated by the relative motion between gas bubbles at two...
journal article 2023
document
Nyns, Emile C.A. (author), Jin, T. (author), Bart, Cindy I. (author), Bax, Wilhelmina H. (author), Zhang, Kouchi (author), Poelma, René H. (author), de Vries, Antoine A.F. (author), Pijnappels, Daniël A. (author)
journal article 2022
document
van Meerkerk, M. (author), Poelma, C. (author), Hofland, Bas (author), Westerweel, J. (author)
We present an experimental study on the gas flow field development over a plunging breaking wave prior to impact on a vertical wall. The variability of wave impact pressure over repeated measurements is well known (Bagnold, 1939). The formation of instabilities on the wave crest are postulated to be the main source of impact pressure variability...
journal article 2022
document
Nyns, Emile C.A. (author), Jin, T. (author), Fontes, Magda S. (author), van den Heuvel, Titus (author), Portero, Vincent (author), Bart, Cindy I. (author), Zeppenfeld, Katja (author), Zhang, Kouchi (author), Poelma, René H. (author)
AIMS: Ventricular tachyarrhythmias (VTs) are common in the pathologically remodelled heart. These arrhythmias can be lethal, necessitating acute treatment like electrical cardioversion to restore normal rhythm. Recently, it has been proposed that cardioversion may also be realized via optically controlled generation of bioelectricity by the...
journal article 2022
document
Yi, H. (author), Öztürk, E. (author), Koelink, Marco (author), Krimmling, Jana (author), Damian, Andrei A. (author), Debski, Wojciech (author), van Zeijl, H.W. (author), Zhang, Kouchi (author), Poelma, René H. (author)
High-performance IC-to-antenna interconnection is one of the key enablers for the mass production of high-end millimeter wave (mmW) radar systems above 100 GHz. In this work, a radar system with an on-package antenna array working at 122 GHz is presented. The antenna is placed on top of the molded package and the antenna-to-chip interconnection...
journal article 2022
document
Hogendoorn, W.J. (author), Frank, David (author), Bruschewski, Martin (author), Poelma, C. (author)
Using magnetic resonance imaging we are able to obtain average velocity and volume fraction profiles in a pipe flow with a neutrally buoyant suspension. In this experimental work, the effect of increasing Reynolds number and particle volume fraction on shear-induced migration is studied. For increasing bulk volume fraction, the initially...
conference paper 2022
document
Muller, K. (author), Greidanus, A.J. (author), Dash, A. (author), Poelma, C. (author)
The circular Taylor-Couette flow is one of the archetypical model systems for the study of flow transitions and dynamic pattern formation in experimental fluid dynamics. The emergence of the internal vortical flow structures are commonly visualized through a rheoscopic flow visualization, while their spatio-temporal dynamics can be extracted by...
conference paper 2022
document
Gawandalkar, U.U. (author), Poelma, C. (author)
Abstract: The so-called ‘re-entrant jet’ is fundamental to periodic cloud shedding in partial cavitation. However, the exact physical mechanism governing this phenomenon remains ambiguous. The complicated topology of the re-entrant flow renders whole-field, detailed measurement of the re-entrant flow cumbersome. Hence, most studies in the...
journal article 2022
document
Dash, A. (author), Hogendoorn, W.J. (author), Oldenziel, G. (author), Poelma, C. (author)
Abstract: Ultrasound imaging velocimetry (UIV) refers to the technique wherein ultrasound images are analysed with 2D cross-correlation techniques developed originally in the framework of particle image velocimetry. Applying UIV to opaque, particle-laden multiphase flows have long been considered to be an attractive prospect. In this study,...
journal article 2022
document
Ye, Guigen (author), Fan, X. (author), Middelburg, L.M. (author), el Mansouri, B. (author), Poelma, René H. (author), Zhang, Kouchi (author)
In this paper, stability and mechanistic simulations for a four-beam-mass-based MEMS gravimeter were conducted, and guidelines for the gravimeter design were proposed. Based on a prototyped MEMS device, the nonlinear finite element model was validated first against the experimental results. Then, we demonstrated three different scenarios in...
journal article 2022
Searched for: +
(1 - 20 of 98)

Pages