- document
-
Verhaar, T.M. (author), Wei, J. (author), Sarro, P.M. (author)In this paper, a process to realize metal lines on the sidewall of high aspect ratio cavities is developed. As an alternative to conventional photoresist, SU8 is used to define patterns on vertical sidewalls of deep cavities while maintaining compatibility with conventional IC processes. When transferring a pattern onto a 3D structure,...journal article 2009
- document
- Wei, Shi (author) journal article 2008
- document
-
Wei, J. (author), Ye, H. (author), Van Zeijl, H.W. (author), Sarro, P.M. (author), Zhang, G.Q. (author)A micro-electro-mechanical-system (MEMS) based, temperature triggered, switch is developed as a cost-effective solution for smart cooling control of solid-state-lighting systems. The switch (1.0x0.4 mm2) is embedded in a silicon substrate and fabricated with a single-mask 3D micro-machining process. The device switches on at a designed...journal article 2012
- document
-
Wei, H. (author), Nazarov, Y.V. (author)We address continuous weak linear quantum measurement and argue that it is best understood in terms of statistics of the outcomes of the linear detectors measuring a quantum system, for example, a qubit. We mostly concentrate on a setup consisting of a qubit and three independent detectors that simultaneously monitor three noncommuting operator...journal article 2008
- document
-
Zimmerling, J.T. (author), Wei, L. (author), Urbach, H.P. (author), Remis, R.F. (author)We present a Krylov model-order reduction approach to efficiently compute the spontaneous decay (SD) rate of arbitrarily shaped 3D nanosized resonators. We exploit the symmetry of Maxwell’s equations to efficiently construct so-called reduced-order models that approximate the SD rate of a quantum emitter embedded in a resonating nanostructure....journal article 2016
- document
-
Van Zeijl, H.W. (author), Wei, J. (author), Shen, C. (author), Verhaar, T.M. (author), Maury, P. (author), Sarro, P.M. (author)Lithography for IC device fabrication is a high volume high accuracy production technology. Such production characteristics are also attractive for MEMS and 3 dimensional (3D) integration processes. However, advanced lithography has a strong 2 dimensional (2D) nature and is not optimized to fabricate 3D structures. In this work, 5 exposure and...journal article 2010
- document
- Wei, He. (author), Castiglione, T. (author), Kandasamy, M. (author), Stern, F. (author) journal article 2015
- document
-
Van Zeijl, H.W. (author), Wei, J. (author), Shen, C. (author), Verhaar, T.M. (author), Sarro, P.M. (author)Lithography as developed for IC device fabrication is a high volume high accuracy patterning technology with strong 2 dimensional (2D) characteristics. This 2D nature makes it a challenge to integrate this technology in a 3 dimensional (3D) manufacturing environment. This article addresses the performance of a waferstepper (ASML PAS5000) in...journal article 2010
- document
-
Wei, L. (author), Elsinga, G.E. (author), Brethouwer, G. (author), Schlatter, P. (author), Johansson, A.V. (author)The Reynolds number scaling of flow topology in the eigenframe of the strain-rate tensor is investigated for wall-bounded flows, which is motivated by earlier works showing that such topologies appear to be qualitatively universal across turbulent flows. The databases used in the current study are from direct numerical simulations (DNS) of fully...journal article 2014
- document
-
Wei, W. (author), Fu, L. (author), Blacquiere, G. (author)A method for the efficient computation of multifrequency focal beams for 3D seismic acquisition geometry analysis has been developed. By computing them for all the frequency components of seismic data, single-frequency focal beams can be extended to multifrequency focal beams. However, this straightforward method involves considerable computer...journal article 2012
- document
-
Wei, J. (author), Chen, Z.L. (author), Liu, Z.W. (author), Sarro, P.M. (author)This paper presents a silicon MEMS capacitive structure to investigate a test methodology for fF-level capacitive sensors’ measurement. The device mimics a capacitive sensor with a changing intermediate layer between the electrodes. A single mask bulk micromachining process is used to fabricate the device, which has a nominal capacitance of 1.2...journal article 2010
- document
-
Wei, X. (author), Wachters, A.J.H. (author), Urbach, H.P. (author)We present a three-dimensional model based on the finite-element method for solving the time harmonic Maxwell equation in optics. It applies to isotropic or anisotropic dielectrics and metals and to many configurations such as an isolated scatterer in a multilayer, bi-gratings, and crystals. We discuss the application of the model to near-field...journal article 2007
- document
-
Estevez, P. (author), Bank, J. (author), Porta, M. (author), Wei, J. (author), Sarro, P.M. (author), Tichem, M. (author), Staufer, U. (author)This paper presents the design, fabrication and characterization of a piezoresistive 6 Degrees of Freedom (DOF) force and torque sensor to be used in micro-manipulation. The mechanical structure of the device consists of 7 suspended beams and a calibration structure, which can be replaced by micro-manipulation tools such as micro-grippers or...journal article 2011
- document
-
Wei, J. (author), Magnani, S. (author), Sarro, P.M. (author)This paper presents a submicron suspended piezoresistive silicon-beam structure as a basic sensing element to replace the conventional piezoresistors, so to improve the detection sensitivity. The alternative element benefits from the increase of the induced stress, which is locally concentrated on the suspended submicron beam. This approach...journal article 2011
- document
-
Konijnenberg, A.P. (author), Wei, L. (author), Kumar, N. (author), Couto Correa Pinto Filho, L. (author), Cisotto, L. (author), Pereira, S.F. (author), Urbach, H.P. (author)In several optical systems, a specific Point Spread Function (PSF) needs to be generated. This can be achieved by shaping the complex field at the pupil. The Extended Nijboer-Zernike (ENZ) theory relates complex Zernike modes on the pupil directly to functions in the focal region. In this paper, we introduce a method to engineer a PSF using the...journal article 2014
- document
-
Weijermars, R. (author), Taylor, P. (author), Bahn, O. (author), Das, S.R. (author), Wei, Y.M. (author)Organizational behavior and stakeholder processes continually influence energy strategy choices and decisions. Although theoretical optimizations can provide guidance for energy mix decisions from a pure physical systems engineering point of view, these solutions might not be optimal from a political or social perspective. Improving the...journal article 2011
- document
-
Wei, J.C. (author), Crezee, W.H.A. (author), Jongeneel, H. (author), de Haas, T.S.A. (author), Kool, W.L.A. (author), Blaauw, Bryan J. (author), Dankelman, J. (author), Horeman, T. (author)The success of total hip arthroplasty depends on the experience of the surgeon, and one of the ways the surgeon currently determines the final implant insertion depth is to listen to the change in audible pitch of the hammering sound. We investigated the use of vibration emissions as a novel method for insertion quality assessment. A non...journal article 2022
- document
-
Wei, Zhang (author), Roos, C. (author)We introduce a new variant of Chubanov's method for solving linear homogeneous systems with positive variables. In the Basic Procedure we use a recently introduced cut in combination with Nemirovski's Mirror-Prox method. We show that the cut requires at most (Formula presented.) time, just as Chubanov's cut. In an earlier paper it was shown...journal article 2022
- document
-
Xu, Weitao (author), Xue, Wanli (author), Lin, Qi (author), Lan, G. (author), Feng, Xingyu (author), Wei, Bo (author), Luo, Chengwen (author), Li, Wei (author), Zomaya, Albert Y. (author)Smart space has emerged as a new paradigm that combines sensing, communication, and artificial intelligence technologies to offer various customized services. A fundamental requirement of these services is person identification. Although a variety of person-identification approaches has been proposed, they suffer from several limitations in...journal article 2022
- document
-
Wei, J.C. (author), Blaauw, Bryan (author), van der Pol, D.G.M. (author), Cruz Saldivar, M. (author), Lai, C. (author), Dankelman, J. (author), Horeman, T. (author)Background: In hip arthroplasties, surgeons rely on their experience to assess the stability and balance of hip tissues when fitting the implant to their patients. During the operation, surgeons use a modular, temporary set of implants to feel the tension in the surrounding soft tissues and adjust the implant configuration. This process is...journal article 2022