Searched for: +
(1 - 19 of 19)
document
Tang, Chenggang (author), Zeng, Simei (author), Hong, H. (author), Fang, Yuan (author), Li, Yuning (author), Wang, Yuqiang (author), Zhu, Mingqiang (author), Sun, Jingye (author), Deng, Tao (author)
Temperature sensors are widely used in industrial production, national defense and military fields. The traditional temperature sensors normally operate in a limited temperature range no more than 200 °C, which cannot be used for extreme high temperature detections. In this paper, a thermal protection method for the sensing graphene membrane...
journal article 2023
document
Guo, Huadong (author), Chen, Fulong (author), Tang, Yunwei (author), Ding, Yanbin (author), Chen, Min (author), Zhou, Wei (author), Zhu, Meng (author), Zheng, Wenwu (author), Pereira Roders, A. (author)
The quantification of the extent and dynamics of land-use changes is a key metric employed to assess the progress toward several Sustainable Development Goals (SDGs) that form part of the United Nations 2030 Sustainable Development Agenda. In terms of anthropogenic factors threatening the conservation of heritage properties, such a metric...
journal article 2023
document
Tang, Y. (author), Zhu, H. (author), Potters, Susan (author), Wisse, M. (author), Pan, W. (author)
This letter addresses the problem of pushing manipulation with nonholonomic mobile robots. Pushing is a fundamental skill that enables robots to move unwieldy objects that cannot be grasped. We propose a stable pushing method that maintains stiff contact between the robot and the object to avoid consuming repositioning actions. We prove that...
journal article 2023
document
Zeng, Simei (author), Tang, Chenggang (author), Hong, H. (author), Yuan, Fang (author), Li, Yuning (author), Wang, Yuqiang (author), Kong, Lingbing (author), Sun, Jingye (author), Zhu, Mingqiang (author), Deng, Tao (author)
The high-temperature pressure sensors have wide applications in aerospace, petroleum, geothermal exploration, automotive electronics, and other fields. However, the traditional silicon-based pressure sensors are restricted to pressure measurement under 120~{\circ }\text{C} and cannot be satisfied to measure the pressure of various gases or...
journal article 2023
document
Li, Yuanyuan (author), Li, Jun (author), Li, Chao (author), Chen, Anqi (author), Bai, Tao (author), Tang, Shimin (author), Wu, Shaopeng (author), Gao, Y. (author), Zhu, Hongbin (author), Feng, Jianlin (author)
A self-compacting steel slag epoxy resin concrete (SERC) was designed with steel slag as aggregate and epoxy resin as binder for rapid repair of road expansion joints and pavement. At the same time, a group of self-compacting basalt epoxy resin concrete (BERC) with basalt as coarse aggregate and limestone as fine aggregate was set up as the...
journal article 2022
document
Bešinović, Nikola (author), Wang, Yihui (author), Zhu, Songwei (author), Quaglietta, E. (author), Tang, Tao (author), Goverde, R.M.P. (author)
In big cities, the metro lines usually face great pressure caused by huge passengers demand, especially during peak hours. When disruptions occur, passengers accumulate quickly at stations. It is of great importance for dispatchers to take passenger flow control into consideration for the traffic management to ensure passengers' safety and to...
journal article 2021
document
Chen, M. (author), Zhu, Li (author), Chen, Jingwen (author), Yang, Fenglin (author), Tang, Chuyang Y. (author), Guiver, Michael D. (author), Dong, Yingchao (author)
Highly efficient and economic treatment of wastewater sludges and wastewaters in one way is a challenging issue in the water treatment field. Herein we present a waste-to-resource strategy for rational fabrication of low–cost ceramic membranes, which simultaneously addresses the treatment of heavy metal-laden sludges and the separation of oil...
journal article 2020
document
Zou, Sheng (author), Xiao, Hanbin (author), Ye, Fangping (author), Li, Z. (author), Tang, Wenzhi (author), Zhu, Feng (author), Chen, Chentong (author), Zhu, Chao (author)
The inevitably formed residual stress in the Selective Laser Melting (SLM) process leads to distortion, crack and even delamination of the workpiece. Single laser is commonly applied during SLM processing. However, its productivity is much lower than multiple lasers. In addition, the research of residual stress with multi-laser condition...
journal article 2020
document
Li, Z. (author), Jiang, X. (author), Hopman, J.J. (author), Zhu, Ling (author), Liu, Z. (author), Tang, Weiguo (author)
Surface cracked steel plates reinforced with single-side Fiber-Reinforced Polymer (FRP) subjected to cyclic tension are experimental studied. The main purpose is to analyze the effect of FRP reinforcement on the crack growth. The failure modes and their effects are analyzed as well. Given the single-side reinforcement, reinforcing the cracked...
journal article 2020
document
Lu, Xingyuan (author), Shao, Y. (author), Zhao, C.L. (author), Konijnenberg, A.P. (author), Zhu, Xinlei (author), Tang, Y. (author), Cai, Yangjian (author), Urbach, Paul (author)
We propose and experimentally demonstrate a noniterative diffractive imaging method for reconstructing the complex-valued transmission function of an object illuminated by spatially partially coherent light from the far-field diffraction pattern. Our method is based on a pinhole array mask, which is specially designed such that the...
journal article 2019
document
Xiao, Ping (author), Buijnsters, J.G. (author), Zhao, Yanxi (author), Yu, Huan (author), Xu, Xuelian (author), Zhu, Yujun (author), Tang, Duihai (author), Zhu, Junjiang (author), Zhao, Zhen (author)
Hydrogen is the most desirable green energy carrier and electrocatalytic hydrogen evolution reaction (HER) from water is a promising route for hydrogen production. The search for efficient, low-cost HER catalysts is a challenging and attracting topic. In this work, we report that inorganic fullerene-like WS<sub>2</sub> supported Pd...
journal article 2019
document
Zhang, Xinying (author), Wu, Yan (author), Xiao, Gao (author), Tang, Zhenping (author), Wang, Meiyin (author), Liu, Fuchang (author), Zhu, X. (author)
Azo dyes are very resistant to light-induced fading and biodegradation. Existing advanced oxidative pre-treatment methods based on the generation of non-selective radicals cannot efficiently remove these dyes from wastewater streams, and post-treatment oxidative dye removal is problematic because it may leave many byproducts with unknown...
journal article 2017
document
Yang, Xiaofan (author), Zhu, Yuanrui (author), Hong, Jing (author), Yang, L. (author), Wu, Yingbo (author), Tang, Yuan Yan (author)
There are quite a number of different metrics of network robustness. This paper addresses the rationality of four metrics of network robustness (the algebraic connectivity, the effective resistance, the average edge betweenness, and the efficiency) by investigating the robust growth of generalized meshes (GMs). First, a heuristic growth...
journal article 2016
document
Xiong, W. (author), Tang, J. (author), Zhu, G. (author), Han, N. (author), Schlangen, E. (author), Dong, B. (author), Wang, X. (author), Xing, F. (author)
Steel is prone to corrosion induced by chloride ions, which is a serious threat to reinforced concrete structures, especially in marine environments. In this work, we report a novel capsule-based selfrecovery system that utilizes chloride ions as a trigger. These capsules, which are functionalized via a smart response to chloride ions, are...
journal article 2015
document
Zhu, G. (author), Wu, Z. (author), Zhou, Y. (author), Tang, J. (author), Dong, B. (author), Han, N. (author), Xing, F. (author)
Epoxy E-51/UF resin microcapsules were prepared by traditional two-stepped in situ polymerization method and processing parameters affecting the final microcapsules’ shape and size were carefully studied in the aim to obtain microcapsule with ideally spherical shape and uniform size. It’s found the polycarboxylate surfactant of SMA (styrene...
conference paper 2013
document
Zhu, G. (author), Lü, L. (author), Tang, J. (author), Dong, B. (author), Han, N. (author), Xing, F. (author)
For epoxy microcapsules embedded in concrete as mechanic-triggered self-healing adhesive, globular shape with uniform size is the basic requirement to ensure the solid shell broken and the liquid core released at a designed stress. In this paper, monodispersed melamine–formaldehyde (MF) resin-walled epoxy E-51 microcapsules were successfully...
conference paper 2013
document
Xiong, W. (author), Zhu, G. (author), Tang, J. (author), Dong, B. (author), Han, N. (author), Xing, F. (author), Schlangen, H.E.J.G. (author)
Poly (urea-formaldehyde) (PUF) shelled dicyclopentadiene (DCPD) microcapsules were prepared by in-situ polymerization technology for self-healing concrete applications. It’s found, during the process, sodium dodecyl benzene sulfonate (SDBS) behaves better in emulsification of DCPD than other surfactant of sodium lauryl sulfate (SLS) and styrene...
conference paper 2013
document
Xiong, W. (author), Zhu, G. (author), Tang, J. (author), Dong, B. (author), Han, N. (author), Xing, F. (author), Schlangen, H.E.J.G. (author)
Poly (urea-formaldehyde) (PUF) shelled dicyclopentadiene (DCPD) microcapsules were prepared by in-situ polymerization technology for self-healing concrete applications. It’s found, during the process, sodium dodecyl benzene sulfonate (SDBS) behaves better in emulsification of DCPD than other surfactant of sodium lauryl sulfate (SLS) and styrene...
conference paper 2013
document
Zhu, G. (author), Zhou, Y. (author), Wu, Z. (author), Tang, J. (author), Dong, B. (author), Han, N. (author), Xing, F. (author)
The microcapsules of epoxy E-51 resin encapsulated by cured itself were prepared by interfacial curing reaction, in which ethylenediamine (EDA) was employed as curing agent and sulfonated copolymer of styrene and maleic anhydride (SMA) as emulsifying agent. It’s found the morphology of microcapsules strongly depend on reaction time and EDA...
conference paper 2013
Searched for: +
(1 - 19 of 19)