Searched for: +
(1 - 19 of 19)
document
Sun, Yubo (author), Mohan, Manu K. (author), Tao, Yaxin (author), Zhang, Yi (author), Van Tittelboom, Kim (author), Ye, G. (author), De Schutter, Geert (author)
To properly control the reaction kinetics and fresh properties evolution in conventional alkali-activated materials (AAMs), a conceptual design of two-stream AAMs has been proposed in this study. This is achieved by dividing the solid and liquid components in AAMs, including blast furnace slag (BFS) and electric arc furnace slag (EFS)...
journal article 2024
document
Chen, B. (author), Chen, J. (author), França de Mendonça Filho, F. (author), Sun, Yubo (author), van Zijl, Marc Brito (author), Copuroglu, Oguzhan (author), Ye, G. (author)
Municipal solid waste incineration (MSWI) bottom ash, due to its high mineral content, presents great potential as supplementary cementitious material (SCM). Weathering, also known as aging, is a treatment process commonly employed in waste management to minimize the risk of heavy metal leaching from MSWI bottom ash. Using weathered MSWI...
journal article 2024
document
Sun, Y. (author), Chen, B. (author), Zhang, Shizhe (author), Blom, C.B.M. (author), Lukovic, M. (author), Ye, G. (author)
With the development of waste recovery techniques, previous research has revealed that coarse fractions of municipal solid waste incineration (MSWI) bottom ash (BA) after proper treatment could be applied in the construction sector, while the fines are seldom recovered in practice and normally landfilled. This study explores the potential...
journal article 2024
document
Sun, Yubo (author), Mohan, Manu K. (author), Dai, Xiaodi (author), Zhang, Yiyuan (author), Ye, G. (author), De Schutter, Geert (author)
The proper control of the rheological performance of silicate-based alkali-activated slag (AAS) mixtures is problematic, as the conventional superplasticizers become less effective in alkaline media. Nevertheless, several methods have been proposed to improve the workability of silicate-activated AAS, such as by extending the mixing time, and...
journal article 2024
document
Sun, Yubo (author), Cheng, H. (author), Zhang, Shizhe (author), Mohan, Manu K. (author), Ye, G. (author), De Schutter, Geert (author)
Alkali-activated concrete (AAC) is regarded as a promising alternative construction material to reduce the CO<sub>2</sub> emission induced by Portland cement (PC) concrete. Due to the diversity in raw materials and complexity of reaction mechanisms, a commonly applied design code is still absent to date. This study attempts to directly...
journal article 2023
document
Sun, Beibei (author), Sun, Yubo (author), Ye, G. (author), De Schutter, Geert (author)
Although the application of blast furnace slag and fly ash-based alkali-activated concrete (BFS/FA-AAC) has both economic and environmental benefits, it is limited by the lack of a straightforward mix design method. In this paper, an experiment was conducted to investigate the effect of control factors, including the Na<sub>2</sub>O/binder...
journal article 2023
document
Sun, Yubo (author), Miranda de Lima Junior, L.C. (author), Rossi, Laura (author), Jiao, Dengwu (author), Li, Z. (author), Ye, G. (author), De Schutter, Geert (author)
To better understand early stiffening of AAS pastes, distinctive microstructural features by varying the silicate modulus (Ms) have been visualized with in-situ microscopy. In addition, the activation reaction was monitored with multiple approaches, while solid and liquid phases in hydrating AAS were characterized separately. In silicate...
journal article 2023
document
Sun, Beibei (author), Sun, Yubo (author), Ye, G. (author), De Schutter, Geert (author)
In this paper, a series of experiments were conducted to systematically and quantitively explore the effects of control factors on the early age properties, i.e., workability and strength of slag and fly ash-based alkali-activated paste (BFS/FA-AAP). The control factors on the workability (flowability and setting time) of BFS/FA-AAP include...
journal article 2022
document
Sun, Yubo (author), Ghorbani, Saeid (author), Dai, Xiaodi (author), Ye, G. (author), De Schutter, Geert (author)
This study provides a detailed investigation on the reproducibility of two groups of alkali-activated slag (AAS) mixtures, from both fresh properties and strength development perspectives. Three different commercial sodium silicate solutions and one lab-produced silicate activator (made of silica fume and sodium hydroxide) were used to...
journal article 2022
document
Li, Shizhen (author), Liu, Yang (author), Ye, H. (author), Liu, X. (author), Sun, Fenglian (author), Fan, Xuejun (author), Zhang, Kouchi (author)
This paper studied the behaviors of sintering between Ag nanoparticle (NP) and nanoflake (NF) in the same size by molecular dynamics simulation. Before the sintering simulation, the melting simulation of NF was carried out to calculate the melting points of NFs and investigate the thermostability of NF. The Lindemann index and potential...
journal article 2022
document
Xu, H. (author), Tian, Zhan (author), Sun, Laixiang (author), Ye, Qinghua (author), Ragno, E. (author), Bricker, J.D. (author), Tan, Jinkai (author), Ke, Q. (author), Wang, Shuai (author)
Compound flooding is generated when two or more flood drivers occur simultaneously or in close succession. Multiple drivers can amplify each other and lead to greater impacts than when they occur in isolation. A better understanding of the interdependence between flood drivers would facilitate a more accurate assessment of compound flood risk...
journal article 2022
document
Sun, Yubo (author), Tao, Yaxin (author), Rahul, A. V. (author), Ye, G. (author), De Schutter, Geert (author)
The rapid workability loss of alkali-activated materials (AAM) has been a major obstacle limiting its onsite application. In this study, two conventional SPs (made of polynaphthalene sulfonate (PNS) and lignosulfonate (LS) salts), which have been reported to be effective in some specific AAM mixtures were separately applied in alkali...
journal article 2022
document
Sun, Yubo (author), Liu, Zhiyuan (author), Ghorbani, Saeid (author), Ye, G. (author), De Schutter, Geert (author)
The present study explores the possibility of replacing blast furnace slag (BFS) with coal fly ash (FA) to produce alkali-activated material (AAM) concrete with hybrid precursors. With an increased FA replacement ratio, the reaction kinetics, fresh and hardened properties of AAM mixtures have been investigated. The retardation effect on the...
journal article 2022
document
Rossi, Laura (author), Miranda de Lima Junior, L.C. (author), Sun, Yubo (author), Dehn, Frank (author), Provis, John L. (author), Ye, G. (author), De Schutter, Geert (author)
The production of cement and concrete contributes significantly to global greenhouse gas emissions. Alkali‐activated concretes (AACs) are a family of existing alternative construction materials that could reduce the current environmental impact of Portland cement (PC) production and utilisation. Successful applications of AACs can be found in...
journal article 2022
document
Sun, Yubo (author), Zhang, Shizhe (author), Rahul, A. V. (author), Tao, Yaxin (author), Van Bockstaele, Filip (author), Dewettinck, Koen (author), Ye, G. (author), De Schutter, Geert (author)
This study aims to interpret the early-stage rheology of alkali-activated slag (AAS) paste from microstructure perspectives. The microstructures visualized by cryogenic scanning electron microscopy (cryo-SEM) revealed the essential distinction between hydroxide and silicate-activated slag pastes. The hydroxide-based mixture showed typical...
journal article 2022
document
Wang, Shuai (author), Toumi, Ralf (author), Ye, Qinghua (author), Ke, Q. (author), Bricker, J.D. (author), Tian, Zhan (author), Sun, Laixiang (author)
It has been shown that the proportion of intense tropical cyclones (TCs) has been increasing together with a poleward migration of TC track. However, their relative importance to TC surge at landfall remains unknown. Here we examine the sensitivity of TC surge in Shanghai to landfall location and intensity with a new dynamical modelling...
journal article 2021
document
Qian, C. (author), Mirza Gheytaghi, Amir (author), Fan, J. (author), Tang, H. (author), Sun, B. (author), Ye, H. (author), Zhang, Kouchi (author)
As an increasing attention towards sustainable development of energy and environment, the power electronics (PEs) are gaining more and more attraction on various energy systems. The insulated gate bipolar transistor (IGBT), as one of the PEs with numerous advantages and potentials for development of higher voltage and current ratings, has been...
journal article 2018
document
Sun, B. (author), Fan, Xuejun (author), Ye, H. (author), Fan, Jiajie (author), Qian, Cheng (author), van Driel, W.D. (author), Zhang, Kouchi (author)
In this paper, an integrated LED lamp with an electrolytic capacitor-free driver is considered to study the coupling effects of both LED and driver's degradations on lamp's lifetime. An electrolytic capacitor-less buck-boost driver is used. The physics of failure (PoF) based electronic thermal simulation is carried out to simulate the lamp's...
journal article 2017
document
Sun, B. (author), Fan, Xuejun (author), Li, Lei (author), Ye, H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
This paper studies the interaction of catastrophic failure of the driver and LED luminous flux decay for an integrated LED lamp with an electrolytic capacitor-free LED driver. Electronic thermal simulations are utilized to obtain the lamp's dynamic history of temperature and current for two distinct operation modes: constant current mode (CCM...
journal article 2017
Searched for: +
(1 - 19 of 19)