Hygrothermal effects on fatigue delamination behavior in composite laminates

Fatigue delamination growth (FDG) is an important failure in composite structures during their long-term operations. Hygrothermal aging can have significant effects on interlaminar resistance. It is therefore really necessary to explore FDG behavior in composite laminates with hygrothermal aging. Dynamic mechanical thermal analysis (DMTA),...

Interfacial Designs of MXenes for Mild Aqueous Zinc-Ion Storage

Limited Li resources, high cost, and safety risks of using organic electrolytes have stimulated a strong motivation to develop non-Li aqueous batteries. Aqueous Zn-ion storage (ZIS) devices offer low-cost and high-safety solutions. However, their practical applications are at the moment restricted by their short cycle life arising mainly from...

Combined CNN and RNN Neural Networks for GPR Detection of Railway Subgrade Diseases

Vehicle-mounted ground-penetrating radar (GPR) has been used to non-destructively inspect and evaluate railway subgrade conditions. However, existing GPR data processing and interpretation methods mostly rely on time-consuming manual interpretation, and limited studies have applied machine learning methods. GPR data are complex, high...

A novel GA-LSTM-based prediction method of ship energy usage based on the characteristics analysis of operational data

Optimization of ship energy efficiency is an efficient measure to decrease fuel usage and emissions in the shipping industry. The accurate prediction model of ship energy usage is the basis to achieve optimization of ship energy efficiency. This study investigates the sequential properties of the actual voyage data from a VLOC. On this basis,...

A Plant-inspired Light Transducer for High-performance Near-infrared Light Mediated Gas Sensing

Constructing near-infrared light (NIR) light-enhanced room temperature gas sensors is becoming more promising for practical application. In this study, learning from the structure and photosynthetic process of chlorophyll thylakoid membranes in plants, the first “Thylakoid membrane” structural formaldehyde (HCHO) sensor is constructed by...

State-of-the-Art Review of Ground Penetrating Radar (GPR) Applications for Railway Ballast Inspection

In the past 20 years, many studies have been performed on ballast layer inspection and condition evaluation with ground penetrating radar (GPR). GPR is a non-destructive means that can reflect the ballast layer condition (fouling, moisture) by analysing the received signal variation. Even though GPR detection/inspection for ballast layers has...

Assessment of ballast layer under multiple field conditions in China

Ballast layer condition should be more regularly and accurately inspected to ensure safe train operation; however, traditional inspection methods cannot sufficiently fulfil this task. This paper presents a method of ground penetrating radar (GPR) application to reflect ballast layer fouling levels under diverse field conditions (annual gross...

Ballast fouling inspection and quantification with ground penetrating radar (GPR)

Ground penetrating radar (GPR) has been applied for ballast layer inspection for two decades, mainly for the analysis of ballast layer fouling levels. However, some issues that affect the inspection quality remain unsolved, such as issues involving the GPR equipment quality (antenna) and the correlation between the GPR indicator and fouling...

Railway ballast layer inspection with different GPR antennas and frequencies

Ground penetrating radar (GPR) is a popular technology for inspecting railway ballast layer, mainly on the ballast fouling level. However, different GPR antennas with different frequencies are suitable for different inspection emphasis and diverse railway lines (weather and sub-structure). In addition, the full-scale track model (with...

Effect of ethanol concentration on methane hydrate decomposition: MD simulation insights

The controllability of mining is a key factor affecting the commercial application of methane hydrates, and the addition of chemical additives can significantly accelerate the mining process. However, the effect of additive concentration on hydrate decomposition is not yet well understood. In this study, we systematically investigate the...

New innovations in pavement materials and engineering: A review on pavement engineering research 2021

Sustainable and resilient pavement infrastructure is critical for current economic and environmental challenges. In the past 10 years, the pavement infrastructure strongly supports the rapid development of the global social economy. New theories, new methods, new technologies and new materials related to pavement engineering are emerging....

Perovskite solar cells with embedded homojunction via nonuniform metal ion doping

A long photoluminescence decay lifetime has been regarded as a generic indication of long charge carrier recombination lifetime in semiconductors such as metal halide perovskites (MHPs), which have shown tremendous success in solar cells. Here, we report that MHP polycrystalline films with extrinsic metal ions have a very long charge...

Nonreciprocal coherent coupling of nanomagnets by exchange spin waves

Nanomagnets are widely used to store information in non-volatile spintronic devices. Spin waves can transfer information with low-power consumption as their propagations are independent of charge transport. However, to dynamically couple two distant nanomagnets via spin waves remains a major challenge for magnonics. Here we experimentally...

Transient supramolecular hydrogels formed by catalytic control over molecular self-assembly

The present work shows how transient supramolecular hydrogels can be formed by catalytically controlled molecular self-assembly. Catalysis formation of molecular gelators leads the self-assembly along a kinetically favored pathway, resulting in transient hydrogels. This work demonstrates an effective approach towards pathway-dependent...

Preparation of a poly(acrylic acid) based hydrogel with fast adsorption rate and high adsorption capacity for the removal of cationic dyes

A biocompatible Dex-MA/PAA hydrogel was prepared through copolymerization of glycidyl methacrylate substituted dextran (Dex-MA) with acrylic acid (AA), which was applied as the adsorbent to remove cationic dyes from aqueous solutions. Dex-MA/PAA hydrogel presented a fast adsorption rate and the removal efficiency of Methylene Blue (MB) and...

Hierarchically Compartmentalized Supramolecular Gels through Multilevel Self-Sorting

Hierarchical compartmentalization through the bottom-up approach is ubiquitous in living cells but remains a formidable task in synthetic systems. Here we report on hierarchically compartmentalized supramolecular gels that are spontaneously formed by multilevel self-sorting. Two types of molecular gelators are formed in situ from...

A triple system of Fe(III)/sulfite/persulfate: Decolorization and mineralization of reactive Brilliant Red X-3B in aqueous solution at near-neutral pH values

We report herein the use of ferric iron (Fe 3 + ) and sulfite (SO 3 2 −) to activate persulfate (S 2 O 8 2 −). Decolorization and mineralization of reactive Brilliant Red X-3B (a model azo dye) by an Fe(III)/sulfite/persulfate triple system have been investigated in aqueous solutions. Initial pH and dis- solved oxygen are important factors...