RAP pre-treatment for fast cold in-place recycling

Developed by Delft University of Technology, the tri-component polyurethane modified cold binder (PMCB) displays impressive durability and strength in asphalt mixtures, showing promise as a reliable binder for cold in-place recycling. However, when applying PMCB for rapid, in-situ recycling, the presence of moisture in reclaimed asphalt...

Highly efficient carbon assimilation and nitrogen/phosphorus removal facilitated by photosynthetic O₂ from algal-bacterial aerobic granular sludge under controlled DO/pH operation

Reducing CO₂ emission and energy consumption is crucial for the sustainable management of wastewater treatment plants (WWTPs). In this study, an algal-bacterial aerobic granular sludge (AGS) system was developed for efficient carbon (C) assimilation and nitrogen (N)/phosphorus (P) removal without the need for mechanical aeration....

Author Correction: Quantification of the Li-ion diffusion over an interface coating in all-solid-state batteries via NMR measurements (Nature Communications, (2021), 12, 1, (5943), 10.1038/s41467-021-26190-2)

The original version of this article contained errors in Figure 3a and Figure 3f. In Figure 3a, the activation energies (Ea) were calculated using a log scale instead of a logarithm ln scale. In Figure 3f, the y-axis interval was not properly selected. The correct y-axis interval in Figure 3f and the numerical values of the activation energy...

Unraveling the influence of fibers on aging susceptibility and performance of high content polymer modified asphalt mixtures

High-Content SBS Polymer Modified Asphalt Mixtures (HCPMA) combined with fibers have gained popularity in porous pavement construction due to their superior performance. Although the aging behavior of HCPMA has been extensively studied, the impact of fibers on performance and aging susceptibility remains unclear. This research investigates the...

Effects of Bitumen Thickness on the Aging Behavior of High-Content Polymer-Modified Asphalt Mixture

The film thickness of asphalt mixtures is critical for determining their performance and aging durability. However, understanding of the appropriate film thickness and its influence on performance and aging behavior for high-content polymer-modified asphalt (HCPMA) mixtures is still limited. This research aims to examine the relationship between...

An integrated EDIB model for probabilistic risk analysis of natural gas pipeline leakage accidents

Natural gas pipeline construction is developing rapidly worldwide to meet the needs of international and domestic energy transportation. Meanwhile, leakage accidents occur to natural gas pipelines frequently due to mechanical failure, personal operation errors, etc., and induce huge economic property loss, environmental damages, and even...

An Ensemble Learning Framework for Vehicle Trajectory Prediction in Interactive Scenarios

Precisely modeling interactions and accurately predicting trajectories of surrounding vehicles are essential to the decision-making and path-planning of intelligent vehicles. This paper proposes a novel framework based on ensemble learning to improve the performance of trajectory predictions in interactive scenarios. The framework is termed...

Effect of High Content of Waste Tire Rubber and Sulfur on the Aging Behavior of Bitumen

High content rubber modified bitumen (HCRMB) prepared from the high content of waste tire rubber and bitumen has good performance while allowing greater use of the waste tires. However, HCRMB is subject to aging during use, which can affect its performance. The purpose of this paper was to investigate the effect of high content of waste tire...

A Comprehensive Study on the Rejuvenation Efficiency of Compound Rejuvenators for the Characterization of the Bituminous Binder, Mortar, and Mixture

This study aims to comprehensively investigate the rejuvenation efficiency of various self-developed compound rejuvenators on the physical, mechanical, and aging properties of aged bitumen, asphalt mortar, and mixture. The results revealed that the restoration capacity of vacuum distilled-oil rejuvenators on high-and-low temperature performance...

Quantification of the Li-ion diffusion over an interface coating in all-solid-state batteries via NMR measurements

A key challenge for solid-state-batteries development is to design electrode-electrolyte interfaces that combine (electro)chemical and mechanical stability with facile Li-ion transport. However, while the solid-electrolyte/electrode interfacial area should be maximized to facilitate the transport of high electrical currents on the one hand,...

Development and Piezoelectric Properties of a Stack Units-Based Piezoelectric Device for Roadway Application

To improve the energy harvesting efficiency of the piezoelectric device, a stack units-based structure was developed and verified. Factors such as stress distribution, load resistance, loads, and loading times influencing the piezoelectric properties were investigated using theoretical analysis and experimental tests. The results show that the...

Perovskite solar cells with embedded homojunction via nonuniform metal ion doping

A long photoluminescence decay lifetime has been regarded as a generic indication of long charge carrier recombination lifetime in semiconductors such as metal halide perovskites (MHPs), which have shown tremendous success in solar cells. Here, we report that MHP polycrystalline films with extrinsic metal ions have a very long charge...

Multi-scale characterization of lignin modified bitumen using experimental and molecular dynamics simulation methods

Lignin, as a major waste from biofuel and paper industries, could be utilized as a modifier to enhance the relevant performance of bitumen. However, the effects of lignin on the thermodynamics properties and molecular structure of bitumen are rarely studied. Meanwhile, the potential modification mechanism of lignin modified bitumen is still...

Mechanical Parameter Identification of Hydraulic Engineering with the Improved Deep Q-Network Algorithm

During the long-term operating period, the mechanical parameters of hydraulic structures and foundation deteriorated gradually because of the environmental factors. In order to evaluate the overall safety and durability, these parameters should be calculated by some accurate analysis methods, which are hindered by slow computational...

Hydrologic and cryospheric processes observed from space

Ten Dragon 3 projects deal with hydrologic and cryosphere processes, with a focus on the Himalayas and Qinghai – Tibet Plateau, but not limited to that. At the 1st Dragon 3 Progress Symposium in 2013 a significant potential for a better and deeper integration appeared very clearly and we worked out an overview of the ten projects identifying...