Searched for: +
(1 - 20 of 77)

Pages

document
Jing, R. (author), Varveri, Aikaterini (author), Liu, X. (author), Scarpas, Athanasios (author), Erkens, S. (author)
Accelerated pavement testing (APT) is an effective method in evaluating pavement performance by applying wheel loading and speed under controlled conditions. This study aims to investigate the effects of wheel loading, speed and ambient temperature on the pavement responses at different directions and depths of pavement structure. A two-layer...
book chapter 2020
document
Jing, R. (author), Varveri, Aikaterini (author), Liu, X. (author), Scarpas, Athanasios (author), Erkens, S. (author)
Ageing has a significant impact on the chemical and mechanical behavior of bituminous materials. In this study, Fourier Transform Infrared (FTIR) spectrometer and Dynamic Shear Rheometer (DSR) tests were utilized to investigate the effect of ageing on the chemical and mechanical properties of bitumen. Bitumen films with thickness of 2 mm were...
book chapter 2019
document
Jing, R. (author), Varveri, Aikaterini (author), Liu, X. (author), Scarpas, Athanasios (author), Erkens, S. (author)
Bitumen ageing is one of the principal factors causing the deterioration of asphalt pavements. As bitumen ages, the pavement loses its ability to relax stresses during loading/unloading and thermal cooling process, thus the risk of cracking increases. Oxidation and ultraviolet (UV) radiation are believed to be the main factors that can cause...
book chapter 2021
document
Liu, X. (author), Tzimiris, G. (author), Li, J. (author), Scarpas, T. (author), Hofman, R. (author), Voskuilen, J. (author)
In order to adequately characterize the fatigue response of the various membranes with surrounding multilayer surfacing layers on orthotropic steel decks and collect the necessary parameters for FE modeling, the details of the cyclic Membrane Adhesion Tester (MAT) are introduced. The fatigue damage in membrane interface is related to the amount...
conference paper 2015
document
Tzimiris, G. (author), Liu, X. (author), Scarpas, A. (author), Li, J. (author), Hofman, R. (author), Voskuilen, J. (author)
Due to lightweight and flexibility, orthotropic steel deck bridges become popular the last decades but several problems were reported in relation to asphalt surfacing materials such as rutting, cracking, loss of bond between the surfacing system and steel deck. In the Netherlands a surfacing structure for orthotropic steel bridge decks mostly...
conference paper 2013
document
Li, J. (author), Liu, X. (author), Scarpas, A. (author), Tzimiris, G. (author)
Light weight orthotropic steel bridge decks have been widely utilized for bridges in seismic zones, movable bridges and long span bridges. In the last three decades, severe problems were reported in relation to asphaltic surfacing materials on orthotropic steel deck bridges. Earlier investigations have shown that the bonding strength of membrane...
conference paper 2013
document
Liu, X. (author), Scarpas, A. (author), Li, J. (author), Tzimiris, G. (author), Hofman, R. (author), Voskuilen, J. (author)
In order to adequately characterize the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) are introduced. Analytical constitutive relations of the MAT device have been derived using the same...
conference paper 2013
document
Liu, X. (author), Scarpas, A. (author), Li, J. (author), Tzimiris, G. (author)
In order to characterize adequately the adhesive bonding strength of the various membranes with surrounding materials on orthotropic steel decks and collect the necessary parameters for FE modeling, details of the Membrane Adhesion Test (MAT) have been introduced. Analytical constitutive relations of MAT device have been derived on the basis of...
conference paper 2012
document
Liu, X. (author), Tzimiris, G. (author), Scarpas, T. (author), Hofman, R. (author), Voskuilen, J. (author)
In order to adequately characterize the fatigue response of the various membranes with surrounding multilayer surfacing layers on orthotropic steel decks and collect the necessary parameters for FE modeling, the details of the cyclic Membrane Adhesion Tester (MAT) are introduced. The fatigue damage in membrane interface is related to the amount...
conference paper 2014
document
Li, J. (author), Liu, X. (author), Scarpas, A. (author), Tzimiris, G. (author)
In the Netherlands an asphaltic surfacing structure for orthotropic steel bridge decks mostly consists of two structural layers. The upper layer consists of Porous Asphalt (PA) because of reasons related to noise hindrance. For the lower layer a choice between Mastic Asphalt (MA) or Guss Asphalt (GA), can be made. In this paper, a typical Dutch...
conference paper 2012
document
Apostolidis, P. (author), Nahar, Sayeda (author), Liu, X. (author), Lommerts, Bert-Jan (author), Erkens, S. (author), Scarpas, Athanasios (author)
The utilization of epoxy-based polymers as bituminous modifiers in developing durable and long-lasting pavement structures have gained increasing interest over the last years showing evidence of high performing materials (1-8). It has been noticed that the addition of epoxy-based modifier into bitumen lead to materials with superior...
conference paper 2019
document
Wang, H. (author), Apostolidis, P. (author), Zhang, H. (author), Liu, X. (author), Erkens, S. (author), Scarpas, Athanasios (author)
Microwave heating is a promising heating technology for the maintenance, recycling and deicing of pavement structures. Many experimental studies have been conducted to investigate the microwave heating properties of asphalt mixtures in the laboratory. However, very few studies investigated the application of microwave heating on asphalt...
conference paper 2020
document
Apostolidis, P. (author), Wang, H. (author), Zhang, H. (author), Liu, X. (author), Erkens, S. (author), Scarpas, Athanasios (author)
Oxidative aging is a complex phenomenon in bitumen and its fundamental understanding is needed to optimize paving materials with long-lasting characteristics. This research reports on a diffuse-reaction model for predicting the oxidation of bituminous binders over time and under different conditions. As known, the oxidation of bitumen is...
conference paper 2020
document
Apostolidis, P. (author), Liu, X. (author), Erkens, S. (author), Scarpas, Athanasios (author)
In-depth understanding of the temperature effect on oxidative aging in epoxy-asphalt blends is needed to enable accurate predictions on material response through their service life. Details of the significance of developing prediction models and tools on oxidative aging of pavement materials are presented in a companion paper (Apostolidis et al....
conference paper 2020
document
Zhang, Y. (author), Liu, X. (author), Jing, R. (author), Apostolidis, P. (author), Erkens, S. (author), Scarpas, Athanasios (author)
During oxidative aging, oxygen reacts with active molecules present in bitumen producing polar compounds, principally ketones and sulfoxides, and increasing in the portion of asphaltenes. In general, oxidation reactions in bitumen yields to change its generic chemical composition and finally its colloidal structure deteriorating the physico...
conference paper 2020
document
Wang, H. (author), Apostolidis, P. (author), Zhang, H. (author), Liu, X. (author), Erkens, S. (author), Scarpas, Athanasios (author)
Fundamental models should be developed and utilized in order to facilitate the chemo-mechanical design of modified binder systems for paving applications but not only. Especially, the fact that the incorporation of new chemical substances used as bio-based modifiers or alternative binders is attracting great interest to replace traditional...
conference paper 2020
document
Jing, R. (author), van Lent, Diederik (author), Kasbergen, C. (author), Scarpas, Athanasios (author), Liu, X. (author), Erkens, S. (author)
When oxygen diffuses in a bituminous film, it also reacts, simultaneously, with the constituents of the bitumen and as such it is gradually depleted. This depletion process masks the characteristics of the actual diffusion process and complicates the determination of the diffusion coefficient needed for computation of oxygen concentration and...
conference paper 2017
document
Apostolidis, P. (author), Liu, X. (author), Kasbergen, C. (author), van de Ven, Martin (author), Pipintakos, G. (author), Scarpas, Athanasios (author)
conference paper 2018
document
Jing, R. (author), Varveri, Aikaterini (author), Liu, X. (author), Scarpas, Athanasios (author), Erkens, S. (author)
Ageing of bitumen is a complex process. It is accompanied by major chemical and mechanical changes. In this study, Fourier Transform Infrared (FTIR) spectrometer and Dynamic Shear Rheometer (DSR) tests were utilized to investigate the effect of ageing on the chemical and mechanical properties of bituminous materials. Bitumen films with thickness...
conference paper 2018
document
Apostolidis, P. (author), Liu, X. (author), Scarpas, Athanasios (author), van Bochove, G (author), van de Ven, Martin (author)
The development of asphalt mixtures with improved electrical and thermal properties is crucial in terms of producing suitable mixtures for the induction heating without losing their durability. The main scope of this research is to evaluate experimentally the impact of filler-sized electrically conductive additives on the induction heating...
conference paper 2016
Searched for: +
(1 - 20 of 77)

Pages