Implementation of Active Damping Control Methodology on Modular Multilevel Converter(MMC)-Based Arbitrary Wave Shape Generator Used for High Voltage Testing

In order to damp the resonance in the MMC-based Arbitrary Wave shape Generator (AWG) used for high voltage testing, an active damping control methodology is proposed in this paper instead of the passive damping with an arm resistor. It is vital to ensure the system’s stability when such an active damping closed loop control is implemented....

Design Guideline for PWM Converter Implementing Periodic VSFPWM: A Comprehensive Analysis on the Harmonics Spectrum

With the great emphasis from the international standard-setting community on the so-called supra-harmonics emissions (2-150 kHz), there are increasing research efforts in this noise level identification, measurement, standard setting and mitigation. The periodic variable switching frequency PWM method, which is known as VSFPWM, can reshape the...

Interleaved AC/DC Converter Operating with ZVS Sinusoidal Triangular-Current-Mode (S-TCM) for Reduced Voltage Harmonics Generation

The sinusoidal Triangular-Current-Mode (S-TCM) method has been proposed in the AC/DC power-factor-correction (PFC) converter to achieve the zero-voltage-switching (ZVS) which can lead to both, high efficiency operation and a high power density design. Nevertheless, the necessary wide range variation of the sinusoidal switching frequency...

Optimal Periodic Variable Switching PWM for Harmonic Performance Enhancement in Grid-Connected Voltage Source Converters

Variable switching frequency PWM (VSFPWM) modulation can be advantageously implemented in industrial applications, such as renewable energy, motor drives, and uninterrupted power supply (UPS) systems, to reduce the injected current harmonic amplitudes, to suppress audible noise, and to improve semiconductor power efficiency. In this article,...

A Carrier-based Two-Phase-Clamped DPWM Strategy With Zero-Sequence Voltage Injection for Three-Phase Quasi-Two-Stage Buck-Type Rectifiers

A three-phase buck-type rectifier features a step-down ac-dc conversion function, which is considered as a prominent solution for electric vehicle chargers and telecommunication systems integrated to the grid above 380 V line to line. However, traditional solutions for those applications employ cascaded architectures with an ac-dc boost-type...

ZVS Turn-on integrated Triangular Current Mode Three-phase PFC for EV On-board Chargers

An efficient, compact and lightweight three-phase AC-DC power factor correction (PFC) converter becomes a necessity for electric vehicles (EVs) On-board chargers (OBCs) in conventional grid-to-vehicle (G2V) and vehicle-to-grid (V2G) charging methods. The commercially available OBCs have very limited power density despite the moderate efficiency...

12-pulse Rectifier with DC-Side Buck Converter for Electric Vehicle Fast Charging

This paper presents the study of a 100kW electric vehicle (EV) fast charger based on a 12-pulse rectifier cascaded with two buck-type DC-DC converters. The proposed circuit operates with a triangular current shaping method which considerably improves the current harmonics performance of the system. The studied circuit is particularly suited...

A New Input-Parallel-Output-Series Three-Phase Hybrid Rectifier for Heavy-Duty Electric Vehicle Chargers

This paper proposes a solution to the circuit topology of heavy-duty electric vehicle (HDEV) chargers. In light of the original hybrid rectifier, a new unidirectional Input-Parallel-Output-Series (IPOS) three-phase hybrid rectifier is proposed and analyzed. The IPOS topology is advantageous at ultra-high power rating to interface the next...

Optimal Power Flow Control in Parallel Operating AC and DC Distribution Links

DC links with back to back voltage source converters are usually built alongside the existing medium voltage ac distribution grids for infrastructure reinforcement. The distribution network operators need to run multiple of such parallel ac and dc links between two substations at optimal efficiency. This article shows that the active power...

Common Mode Currents in DC Power Routers

The grid reinforcement and energy redirection needs have led to the emergence of Back-To-Back Voltage Source Converter (BTB-VSC) based dc power routers. This paper investigates the low frequency Common Mode Currents (CMCs) that arise in the system if the employed BTB-VSCs have an un-isolated ac path connected in parallel to their output ports....

Virtual Resistor Active Damping with Selective Harmonics Control of LCL-Filtered VSCs

LCL filter is widely adopted for strict standard compliance of grid-tied voltage source converters (VSCs). The third order low-pass filtering provides great attenuation for the high frequency harmonics generated by the power electronics guaranteeing low output currents noise injection into the grid. A major concern of the implementation of the...

Voltage Source Converter Control under Distorted Grid Voltage for Hybrid AC-DC Distribution Links

Back-To-Back (B2B) Voltage Source Converter (VSC) with AC-side LCL filters can be adopted for parallel AC-DC distribution links. In this paper, Grid-side Current Control (GCC) for the inner/fast control loops of the front- and backend power electronics are implemented in order to enhance the system performance against grid disturbances. Herein,...

Number of Levels, Arm Inductance and Modulation Trade-offs for High Power Medium Voltage Grid-Connected Modular Multilevel Converters

There is an increasing focus on integrating flexible dc links for bulk power routing in medium voltage distribution grids. In such applications, the ac-dc Modular Multilevel Converter (MMC) devised for medium voltage and high-power ratings can be an interesting choice. This paper highlights some less explored design trade-offs arising due to...