Searched for: +
(1 - 20 of 26)

Pages

document
Long, Jianjun (author), Wei, Xuejiao (author), Dong, Yiting (author), Cheng, Xixi (author), Li, Hao (author), Xu, X. (author), Zhu, Minhao (author)
A systematic experimental investigation concerning the fretting-induced tribo-chemical state and its effect on the fretting wear behavior of titanium alloys under the vacuum atmospheres (4 × 10<sup>–3</sup> Pa and 4 × 10<sup>–1</sup> Pa) in different fretting regimes is reported. An in situ XPS analysis tester was developed to capture the...
journal article 2024
document
Zhu, H. (author), Liu, E. (author), You, Fangzhou (author), de Bont, Cees (author), Gruber, Thorsten (author), Dong, Hua (author), Melles, M. (author)
Economic studies have shown that living in poverty may produce a subjective feeling of scarcity, which affects people's cognitive functions and decision-making. Understanding this mechanism could inform healthcare designers on designing inclusive health interventions by considering the psychological scarcity and limited cognitive resources of...
book chapter 2024
document
Zhu, G. (author), Dong, J. (author), Grazian, F. (author), Bauer, P. (author)
This article presents a parameter recognition-based impedance tuning method for the impedance mismatch caused by capacitance drift and coil misalignment in series-series-compensated wireless power transfer (WPT) systems. First, a parameter recognition method is proposed to identify the unknown parameters of the resonant circuits by only...
journal article 2023
document
Zhu, G. (author), Dong, J. (author), Bauer, P. (author)
It is ideal for the wireless power transfer (WPT) systems to operate at the resonance state for better transmission performance. In practice, however, the parameters of the resonant circuits often deviate because of the capacitance drift and coil misalignment. To this end, this paper proposes a new parameter estimation method for the WPT systems...
conference paper 2023
document
Cheng, Gang (author), Wu, S. (author), Shi, M. (author), Dong, W. (author), Zhu, H. (author), Alonso-Mora, J. (author)
Autonomous navigation of Micro Aerial Vehicles (MAVs) in dynamic and unknown environments is a complex and challenging task. Current works rely on assumptions to solve the problem. The MAV's pose is precisely known, the dynamic obstacles can be explicitly segmented from static ones, their number is known and fixed, or they can be modeled with...
journal article 2023
document
Du, Yunlu (author), Huang, Yunkai (author), Guo, Baocheng (author), Zhu, Zichong (author), Peng, Fei (author), Dong, J. (author)
In this article, an efficient multi-objective optimization strategy for the Halbach array permanent magnet synchronous machine (PMSM) is developed by taking into consideration the nonlinear B-H behavior of soft magnetic materials. Based on the harmonic modeling (HM) technology, the electromagnetic performances (EPs) of the Halbach array PMSM...
journal article 2023
document
Chen, Gang (author), Dong, Wei (author), Peng, Peng (author), Alonso-Mora, J. (author), Zhu, Xiangyang (author)
Particle-based dynamic occupancy maps were proposed in recent years to model the obstacles in dynamic environments. Current particle-based maps describe the occupancy status in discrete grid form and suffer from the grid size problem, wherein a large grid size is unfavorable for motion planning while a small grid size lowers efficiency and...
journal article 2023
document
Yao, Y. (author), Huang, Yunkai (author), Peng, Fei (author), Dong, J. (author), Zhu, Zichong (author)
This article proposes a compensation method of position estimation error for high-speed surface-mounted permanent magnet synchronous motors based on robust inductance estimation. The proposed method relies on the variation of the estimated δ-axis back back-electromotive force when a small current is injected into the γ axis. The inductance...
journal article 2022
document
Yao, Y. (author), Huang, Yunkai (author), Peng, Fei (author), Dong, J. (author), Zhu, Zichong (author)
This article proposes a discrete-time dynamic-decoupled current controller for an LCL-equipped high-speed permanent magnet synchronous machine with only the motor currents measured. The controller is designed in the synchronous coordinate based on a complex z-domain transfer function. The main contribution of the proposed current controller...
journal article 2022
document
Yao, Yu (author), Huang, Yunkai (author), Peng, Fei (author), Dong, J. (author), Zhu, Zichong (author)
In this article, a novel dynamic-decoupled active damping current controller is proposed for an LCL-equipped high-speed permanent magnet synchronous machine. Compared with the conventional stationary current-control method for the LCL-type system, the proposed method is established in the synchronous rotating frame for improving the current...
journal article 2022
document
Zhu, Zichong (author), Deng, Jun (author), Dou, Xun (author), Mei, Lei (author), Huang, Yunkai (author), Dong, J. (author)
The zero-sequence inductance is a vital parameter for the performance analysis of permanent magnet machines, especially under faulty conditions or in open-winding machines. This paper focuses on the zero-sequence inductance calculation of fractional slot concentrated winding permanent magnet synchronous machines (FSCW-PMSMs), and reveals the...
journal article 2022
document
Yao, Yu (author), Huang, Yunkai (author), Peng, Fei (author), Dong, J. (author), Zhu, Zichong (author)
This letter proposes a general single-sensor active damping framework for LCL-equipped high-speed permanent magnet synchronous machines. By the proposed method, arbitrary damping assignment and stability for the LCL resonance within the Nyquist frequency are achieved with only the inverter-current feedback or motor-current feedback. Moreover,...
journal article 2022
document
Yu, G. (author), Dong, J. (author), Soeiro, Thiago B. (author), Zhu, G. (author), Yao, Y. (author), Bauer, P. (author)
This article introduces a three-mode variable-frequency zero-voltage switching (ZVS) modulation method for the four-switch buck+boost converter. This method makes this circuit concept well suited for applications, such as wireless power charging of electric vehicles, where this circuit operates as a power buffer between the resonant converter...
journal article 2022
document
Zhu, G. (author), Dong, J. (author), Shi, W. (author), Soeiro, Thiago B. (author), Xu, J. (author), Bauer, P. (author)
This article proposes a mode-switching-based phase shift control (MS-PSC) for wireless power transfer (WPT) systems, which is able to achieve power regulation, load matching, and wide ZVS operations simultaneously without using additional dc-dc converters. Based on the mode transitions between the full-bridge, mixed-bridge, and half-bridge...
journal article 2022
document
Dong, J. (author), Tümer, N. (author), Putra, N.E. (author), Zhu, Jia-Ning (author), Li, Y. (author), Leeflang, M.A. (author), Taheri, P. (author), Fratila-Apachitei, E.L. (author), Mol, J.M.C. (author), Zadpoor, A.A. (author), Zhou, J. (author)
Additively manufactured (AM) biodegradable magnesium (Mg) scaffolds with precisely controlled and fully interconnected porous structures offer unprecedented potential as temporary bone substitutes and for bone regeneration in critical-sized bone defects. However, current attempts to apply AM techniques, mainly powder bed fusion AM, for the...
journal article 2021
document
Zhu, Sa (author), Dong, J. (author), Li, Yanru (author), Hua, Wei (author)
Normal calculation of the carrier harmonic iron losses (CHILs) brought by the pulse width modulated (PWM) voltage source inverter in interior permanent magnet synchronous motors by the time-stepping finite-element analysis (TSFEA) with short time steps is very time-consuming. In this study, a novel method for fast calculation is proposed,...
journal article 2020
document
Zhu, Zichong (author), Huang, Yunkai (author), Dong, J. (author), Peng, Fei (author), Yao, Yu (author)
This article presents a new rotor design to reduce rotor eddy current loss of a high-speed permanent magnet synchronous machine for flywheel energy storage system. Instead of using common nonmagnetic sleeves, the new rotor incorporates permeable retaining sleeves (PRSs) to fix permanent magnets on the rotor hub. The PRSs are made of permalloy...
journal article 2020
document
Chen, M. (author), Zhu, Li (author), Chen, Jingwen (author), Yang, Fenglin (author), Tang, Chuyang Y. (author), Guiver, Michael D. (author), Dong, Yingchao (author)
Highly efficient and economic treatment of wastewater sludges and wastewaters in one way is a challenging issue in the water treatment field. Herein we present a waste-to-resource strategy for rational fabrication of low–cost ceramic membranes, which simultaneously addresses the treatment of heavy metal-laden sludges and the separation of oil...
journal article 2020
document
Zhu, Zichong (author), Huang, Yunkai (author), Dong, J. (author), Peng, Fei (author)
This paper presents a new rotor design with assembled permeable retaining sleeve (APRS) to improve performances of a high speed permanent magnet synchronous machine (PMSM). The APRS consists of equal number of permeable and nonmagnetic parts, which are alternately arranged and assembled together circumferentially via keyways. Electromagnetic and...
journal article 2019
document
Zhu, Zichong (author), Huang, Yunkai (author), Dong, J. (author), Peng, Fei (author)
Fractional slot concentrated winding machines (FSCWMs) with the low operation speed and large diameter usually have a large number of poles and slots; thus, numerous pole/slot combinations are feasible. The common practice to choose pole/slot combinations by multiplying the basic combinations may neglect some competitive candidates. Taking 36...
journal article 2019
Searched for: +
(1 - 20 of 26)

Pages