Searched for: +
(1 - 20 of 50)

Pages

document
Gan, Yidong (author), Liang, M. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)
This study employs a lattice fracture model to simulate static and fatigue fracture behaviour of Interfacial Transition Zone (ITZ) at microscale and mortar at mesoscale. The heterogeneous microstructure of ITZ and mesostructure of mortar are explicitly considered in the models. The initial step involves calibrating and validating the...
journal article 2024
document
Long, Lingege (author), Li, Qingxiang (author), Gan, Zhenkun (author), Mu, Jun (author), Overend, M. (author), Zhang, Dayu (author)
The building sector has gained significant attention due to its remarkably high energy consumption and greenhouse gas emissions. In China's rural areas, stone is a popular building material, but there are unprecedented demands to improve the life-cycle performance of stone buildings. It is essential to preserve the original architectural...
journal article 2023
document
Liang, M. (author), He, S. (author), Gan, Yidong (author), Zhang, Hongzhi (author), Chang, Z. (author), Schlangen, E. (author), Šavija, B. (author)
This paper employs computer vision techniques to predict the micromechanical properties (i.e., elastic modulus and hardness) of cement paste based on an input of Backscattered Electron (BSE) images. A dataset comprising 40,000 nanoindentation tests and 40,000 BSE micrographs was built by express nanoindentation test and Scanning Electron...
journal article 2023
document
Xiao, Hong (author), Zhang, Zhihai (author), Zhu, Yajie (author), Gan, Tiancheng (author), Wang, Haoyu (author)
Before the operation of newly constructed railways, tamping and stabilizing machines should be used to improve the quality of ballast beds. With the expansion of the railway network and increase of speeds and axle loads, higher quality and efficiency for tamping and stabilizing operation are required. However, previous studies did not involve...
journal article 2023
document
Gan, Y. (author), Mirzaei, B. (author), Silva, J. R.G. (author), Cherednichenko, S. (author), Van Der Tak, F. (author), Gao, J.R. (author)
We have studied THz heterodyne detection in sub-micrometer MgB2 hot electron bolometer (HEB) mixers based on superconducting MgB2 films of ∼ 5 nm (HEB-A), corresponding to a critical temperature (Tc) of 33.9 K, and ∼ 7 nm (HEB-B), corresponding to a T c of 38.4 K. We have measured a double sideband (DSB) receiver noise temperature of 2590 K...
journal article 2023
document
Gan, Y. (author)
Ageing is an inherent feature of cementitious materials. Ageing of material leads to gradual loss of the function of a concrete structure with increasing likelihood of failure. As one of the typical ageing phenomena, fatigue of concrete, has recently received considerable research attention. The phenomenon of concrete fatigue is complicated as...
doctoral thesis 2022
document
Forouzi Feshalami, Behzad (author), He, Shuisheng (author), Scarano, F. (author), Gan, Lian (author), Morton, Chris (author)
Experimental studies dealing with the wake of isolated stationary bluff bodies are reviewed. After briefly recalling the pioneering works in this domain, the paper focuses on recent research conducted with the latest experimental methods and techniques. The review encompasses a range of topics, including the effects of bluff body geometry ...
review 2022
document
Gao, J.R. (author), Gan, Y. (author), Mirzaei, B. (author), Silva, J. R.G. (author), Cherednichenko, S. (author)
Heterodyne receivers combining a NbN HEB mixer with a local oscillator (LO) are the work horse for high resolution (≥106) spectroscopic observations at supra-terahertz frequencies. We report an MgB2 HEB mixer working at 5.3 THz with<br/>20 K operation temperature based on a previously published paper [Y. Gan et al, Appl. Phys. Lett., 119, 202601...
conference paper 2022
document
Zhang, Y. (author), Liang, M. (author), Gan, Y. (author), Copuroglu, Oguzhan (author)
Slag rim mainly consists of secondary precipitations such as C–S–H gel phase and hydrotalcite-like phase, which originate from the hydration of slag. In this paper, the micro-mechanical properties of slag rim were characterized by nanoindentation in combination with SEM. It was found that, compared to the C–S–H gel phase, slag rim showed about a...
journal article 2022
document
Liang, M. (author), Gan, Y. (author), Chang, Z. (author), Wan, Z. (author), Schlangen, E. (author), Šavija, B. (author)
This study aims to provide an efficient alternative for predicting creep modulus of cement paste based on Deep Convolutional Neural Network (DCNN). First, a microscale lattice model for short-term creep is adopted to build a database that contains 18,920 samples. Then, 3 DCNNs with different consecutive convolutional layers are built to learn...
journal article 2022
document
Liang, M. (author), Li, Z. (author), He, S. (author), Chang, Z. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)
Stress evolution of restrained concrete is a significant direct index in early-age cracking (EAC) analysis of concrete. This study presents experiments and numerical modelling of the early-age stress evolution of Ground granulated blast furnace slag (GGBFS) concrete, considering the development of autogenous deformation and creep. Temperature...
journal article 2022
document
Liang, M. (author), Chang, Z. (author), Wan, Z. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)
This study aims to provide an efficient and accurate machine learning (ML) approach for predicting the creep behavior of concrete. Three ensemble machine learning (EML) models are selected in this study: Random Forest (RF), Extreme Gradient Boosting Machine (XGBoost) and Light Gradient Boosting Machine (LGBM). Firstly, the creep data in...
journal article 2022
document
Li, Ji (author), Hao, Xiaodi (author), Gan, W. (author), van Loosdrecht, Mark C.M. (author), Wu, Yuanyuan (author)
Alginate like extracellular polymers (ALE) recovered from flocculent sludge has been identified as a kind of highly valuable biomaterials. However, the extraction protocols limit the production of biopolymers as ALE extracted from flocculent sludge is at a lower level, around 90–190 mg/g VSS. Under this circumstance, the eco-friendly and...
journal article 2022
document
Li, Ji (author), Hao, Xiaodi (author), Gan, Wei (author), van Loosdrecht, Mark C.M. (author), Wu, Yuanyuan (author)
Alginate like extracellular polymers (ALE) recovered from excess sludge have been evaluated as an eco-friendly, cost effective and sustainable alternative to highly valued materials. However, the ALE extraction from flocculent sludge ranges normally from 90 to 190 mg/g VSS, which is only equivalent to the lowest edge of the ALE production...
journal article 2022
document
Xu, Y. (author), Gan, Y. (author), Chang, Z. (author), Wan, Z. (author), Schlangen, E. (author), Šavija, B. (author)
Tailoring lattice structures is a commonly used method to develop lattice materials with desired mechanical properties. However, for cementitious lattice materials, besides the macroscopic lattice structure, the multi-phase microstructure of cement paste may have substantial impact on the mechanical responses. Therefore, this work proposes a...
journal article 2022
document
Liang, M. (author), Chang, Z. (author), He, S. (author), Chen, Y. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)
Early-age stress (EAS) is an important index for evaluating the early-age cracking risk of concrete. This paper encompasses a thermo-chemo-mechanical (TCM) model and active ensemble learning (AEL) for predicting the EAS evolution. The TCM model provides the data for the AEL model. First, based on Fourier's law, Arrhenius’ equation, and rate...
journal article 2022
document
Gan, Naifeng (author), Sun, S.Z. (author), Zhang, Zhaosheng (author), Xu, Shiqi (author), Liu, Peng (author), Qin, Z. (author)
The overdischarge can significantly degrade a lithium-ion (Li-ion) battery's lifetime. Therefore, it is important to detect the overdischarge and prevent severe damage of the Li-ion battery. Depending on the battery technology, there is a minimum voltage (cutoff voltage) that the battery is allowed to be discharged in common practice. Once the...
journal article 2022
document
Gan, Y. (author), Zhang, Hongzhi (author), Liang, M. (author), Zhang, Y. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)
In this study, the flexural strength and fatigue properties of interfacial transition zone (ITZ) were experimentally investigated at the micrometre length scale. The hardened cement paste cantilevers (150 × 150 × 750 μm<sup>3</sup>) attached to a quartzite aggregate surface were prepared and tested under the monotonic and cyclic load using a...
journal article 2022
document
Gan, Y.Y. (author), Wang, Shuping (author), Wu, Xiaofan (author), Yan, Lina (author)
In Australia,28% of the population live in remote and rural areas,where they face many health service utilization challenges due to geographical conditions,and generally have lower health status than those living in coastal metropolitan areas. To address the challenges of accessing health services in remote and rural areas,the Australian...
journal article 2022
document
Zhang, Y. (author), Liang, M. (author), Gan, Y. (author), Copuroglu, Oguzhan (author)
This paper reports the carbonation characteristics of a cement-slag system exposed to accelerated carbonation testing, and its improved carbonation resistance with the increasing MgO content in blast furnace slag, in which hydrotalcite-like phase plays a key role. Our research showed that the hydrotalcite-like phase started to carbonate upon...
journal article 2022
Searched for: +
(1 - 20 of 50)

Pages