Antenna-in-Package (AiP) Using Through-Polymer Vias (TPVs) for a 122-GHz Radar Chip

High-performance IC-to-antenna interconnection is one of the key enablers for the mass production of high-end millimeter wave (mmW) radar systems above 100 GHz. In this work, a radar system with an on-package antenna array working at 122 GHz is presented. The antenna is placed on top of the molded package and the antenna-to-chip interconnection...

Compressive response of pristine and superconductor coated MWCNT pillars

High-resolution MEMS inertial sensor combining large-displacement buckling behaviour with integrated capacitive readout

Commercially available gravimeters and seismometers can be used for measuring Earth’s acceleration at resolution levels in the order of ng∕Hz (where g represents earth’s gravity) but they are typically high-cost and bulky. In this work the design of a bulk micromachined MEMS device exploiting non-linear buckling behaviour is described, aiming...

Designing a 100 [aF/nm] capacitive transducer

The mechanical part of inertial sensors can be designed to have a large mechanical sensitivity, but also requires the transduction mechanism which translates this displacement. The overall system resolution in mechanical inertial sensors is dictated by the noise contribution of each stage and the magnitude of each sensitivity, see also Figure...

Non-linear bulk micromachined accelerometer for high sensitivity applications

This work describes the design, modelling and realisation of the mechanical part of a non-linear MEMS accelerometer intended for large displacement behaviour. For this, a mass/spring system was designed with an extremely low resonance frequency. In this work the mechanical behaviour was verified by measurements done using an optical setup,...

High aspect ratio spiral resonators for process variation investigation and MEMS applications

In this work a method is described to investigate process variations across a wafer. Through wafer MEMS spiral resonators were designed, simulated, fabricated and characterized by measuring the eigenfrequency and corresponding mode shapes. Measuring the eigenfrequency and resulting spectral behavior of resonators on different locations on the...

3D interconnect technology based on low temperature copper nanoparticle sintering

We explore a methodology for patterned copper nanoparticle paste for 3D interconnect applications in wafer to wafer (W2W) bonding. A novel fine pitch thermal compression bonding process (sintering) with coated copper nanoparticle paste was developed. Most of the particle size is between 10-30 nm. Lithographically defined stencil printing using...