Pages
- 1
- 2
- document
-
Persaud, S.M. (author), Flipsen, Bas (author)In September 2021, the faculty of Industrial Design Engineering (IDE) introduced a revamped bachelor's program that emphasizes design for higher complexity, teacher as a coach, and autonomous learning. The program includes Understanding Product Engineering (UPE), which teaches first-year design students about product embodiment, manufacturing,...conference paper 2023
- document
- Flipsen, Bas (author) book chapter 2023
- document
-
van Oudheusden, A.A. (author), Buijserd, A.J. (author), Doubrovski, E.L. (author), Flipsen, Bas (author), Faludi, Jeremy (author), Balkenende, R. (author)Spare parts availability is crucial for extending the life of consumer products. However, long-term availability could lead to high stocks of spare parts, which might not be used. Instead, on-demand manufacturing of spare parts with additive manufacturing (AM) is a promising alternative. This paper presents a method to evaluate parts on their...conference paper 2023
- document
-
van Oudheusden, A.A. (author), Bolanos Arriola, J. (author), Faludi, Jeremy (author), Flipsen, Bas (author), Balkenende, R. (author)The availability and storage of spare parts are the main barriers to product repair. One possibility would be to 3D print spare parts, which would also enable the repair of products not intended to be repaired. Besides manufacturers, 3D printing spare parts is an interesting option for self-repair by consumers. However, the digitisation of...journal article 2023
- document
-
Samenjo, K.T. (author), van Oudheusden, A.A. (author), Bolanos Arriola, J. (author), Flipsen, Bas (author), Faludi, Jeremy (author)The Sharepair project aims to decrease the waste of electronic and electric consumer products and increase their useful life, by supporting repair communities and scaling up citizen repairs through digital tools. One of the focus areas of this project is to support the discovery or manufacturing of spare parts. With a 3D CAD model of a part and...conference paper 2022
- document
-
de Pauw, I.C. (author), van der Grinten, B. (author), Flipsen, Bas (author), Alvarez Mendez, L.M. (author)Most products require a redesign to be viable in a circular economy. For instance, by implementing design for disassembly, remanufacturing, recyclability, and using long-lived components. Typically, different solutions can be chosen to improve a products' circularity, and different strategies can be aimed at keeping the product, its components,...conference paper 2022
- document
-
Bolanos Arriola, J. (author), van Oudheusden, A.A. (author), Flipsen, Bas (author), Faludi, Jeremy (author)This guide takes the reader through the 3D Printing for Repair (3DP4R) process. It consists of guidelines and tools to create a 3D printable version of spare parts needed for a product repair. 3D printing a spare part is more than just printing the original part. Instead, it is an iterative process in which the part is analysed, redesigned,...book 2022
- document
-
Flipsen, Bas (author), Persaud, S.M. (author)In our Integrated Product Design master at the Delft faculty of Industrial Design Engineering we see a growing diversity in our student population. Besides a growing number of different nationalities there are also significant differences in prior education, competences, and socioemotional aspects. Within the Advanced Embodiment Design (AED)...conference paper 2022
- document
-
De Fazio, F. (author), Bakker, C.A. (author), Flipsen, Bas (author), Balkenende, R. (author)Designers and engineers need better tools and methods to create highly repairable products. Design for disassembly and reassembly is an important product related design feature that can enhance repair. In a highly repairable product, the components that fail most often should be easily accessible for repair or replacement. This paper...journal article 2021
- document
-
Joustra, J.J. (author), Flipsen, Bas (author), Balkenende, R. (author)Composite materials are an attractive material choice as they enable lightweight, low-maintenance products with a long lifespan. Recycling these materials, however, remains a chal-lenge. Homogeneous material composition and the use of thermoset matrices complicate repro-cessing, and result in low-grade recyclate. This means that closing the...journal article 2021
- document
-
Joustra, J.J. (author), Flipsen, Bas (author), Balkenende, R. (author)Composite materials are an attractive material choice as they enable lightweight, low maintenance products with a long lifespan. But closing the loop for these materials in a Circular Economy (CE) is challenging, especially for thermoset composites. In a CE, products should be designed for minimal impact while preserving their environmental and...conference paper 2021
- document
-
Joustra, J.J. (author), Flipsen, Bas (author), Balkenende, R. (author)Composite materials offer many advantages during the use phase, but recovery at the end of a lifecycle remains a challenge. Structural reuse, where an end of life product is segmented into construction elements, may be a promising alternative. However, composites are often used in large, complex shaped products with optimised material...journal article 2021
- document
-
Joustra, J.J. (author), Flipsen, Bas (author), Balkenende, R. (author)Composite materials, in particular fibre reinforced polymers, present a challenge when reaching their end of life. Current recycling processes are unable to capture the high-end material quality, thus challenging (re)use of composite materials in a Circular Economy. Structurally reusing segmented parts of end-of-life products as construction...journal article 2021
- document
-
Flipsen, Bas (author), Bakker, C.A. (author), de Pauw, I.C. (author)Designing products for the Circular Economy requires closing and slowing of loops by means of repair, reman-ufacturing, refurbishment, parts reuse and/or recycling. Ease of product disassembly facilitates these processes to be more cost-effective, resulting in a better circular strategy fit. In this paper we present the Hotspot Map-ping method....conference paper 2020
- document
-
Susha, I. (author), Flipsen, M. (author), Agahari, W. (author), de Reuver, Mark (author)Data has become a core asset, as well as a “management fashion”, of our time. It brings about unprecedented opportunities for data-driven decision making and innovation in various spheres of public life. This concerns data held by governments, as well as companies, academic institutions, non-profits, and citizens. In our study we investigate a...conference paper 2020
- document
-
Pozo Arcos, B. (author), Bakker, C.A. (author), Flipsen, Bas (author), Balkenende, R. (author)Fault diagnosis is the process of identifying and characterising a fault when a failure occurs. It is, therefore, an essential step to take before product-repair. In this study, we ask how conventional users diagnose faults in household appliances and how the design of these appliances facilitates or hampers the process of fault diagnosis.To...journal article 2020
- document
-
Klaassen, Nine (author), Scheepens, A.E. (author), Flipsen, Bas (author), Vogtländer, J.G. (author)In search of sustainable business models, product innovation must fulfil a double objective: the new product must have a higher (market) value, and at the same time a lower eco-burden. To achieve this objective, it is an imperative that the value, the total costs of ownership, and the eco-burden of a product are analysed at the beginning of...journal article 2020
- document
-
Flipsen, S.F.J. (author), Bakker, C.A. (author), Verwaal, M. (author)Since 2008 the faculty of Industrial Design Engineering at the TU Delft hosts the minor Sustainable Design Engineering. The minor has been highly useful as a platform to pilot new ways of teaching engineering for sustainable development. Instead of having students make life cycle assessments and introduce them to straightforward checklists to...conference paper 2015
- document
-
Rios Soltero, E.F. (author), Spitas, C. (author), Flipsen, S.F.J. (author), Savelberg, H.H.C.M. (author)Due to the complexity of joints and the difficulty to get accurate position measurements, most biomechanical analyses regarding cycling are based on some basic assumptions. For instance, a fixed distance is often set between the hip joint and the seat. Sometimes, this joint is considered to be coincident with the line of the seat-tube. Other...journal article 2014
- document
- Papadopoulou, A. (author), Flipsen, S.F.J. (author), Silvester, S. (author), Brezet, J.C. (author) conference paper 2013
Pages
- 1
- 2