Error Features in Predicting Typhoon Winds: A Case Study Comparing Simulated and Measured Data

Simulating a typhoon’s wind field via mesoscale models is important in terms of providing not only the guidelines for urban planning and onshore/offshore constructions, but also the provision of insight into the dynamics and thermodynamics of tropical cyclone systems. Therefore, the errors that are contained in simulation results were...

Influence of solder condition on effective thermal conductivity of two-directional random fibres: Pore-scale simulation

It is indicated that the solder joint of the metal fibrous materials is a critical factor impacting the heat conduction. To reveal the mechanism by which solder joint sizes, solder joint skips, solder flux materials, and filling media affect the thermal conductivity of fibres, pore-scale numerical simulation is employed to study the thermal...

Buckling failure analysis of storage tanks under the synergistic effects of fire and wind loads

Fire-induced domino effect is one of the main threats to hazardous material storage tanks, and many attempts have been conducted to assess the vulnerability of storage tanks exposed to fire to evaluate domino effect risk. However, past research ignored the influence of wind load on the thermal buckling behavior of storage tanks exposed to...

Numerical study on the flow characteristics of micro air vehicle wings at low Reynolds numbers

The aerodynamic characteristics around a micro air vehicle wing with an inverse-Zimmerman configuration are numerically investigated by an in-house programmed solver particularly dedicated for aircrafts operating in low Reynolds number regime. The complex three-dimensional aerodynamic performance was investigated in terms of force generation...

Corrected method for scaling the dynamic response of stiffened plate subjected to blast load

Test on a small scaled model is an effective approach to predict the dynamic response of full scale structure under blast loadings. However, the geometric dimensions of specimens cannot simply comply with complete geometrical similarity due to manufacture or test restrictions. It would result in the difference structural performance between...