Wall treatments for aeroacoustic measurements in closed wind tunnel test sections

Aeroacoustic tests in closed wind tunnels are affected by reflections in the tunnel circuit and background noise. Reflections can be mitigated by lining the tunnel circuit. The present study investigates if lining exclusively the most accessible segment of a closed wind tunnel circuit, in particular the test section, is an approach which...

Comparison of cavity geometries for a microphone array in an open-jet wind-tunnel experiment

This paper analyses the influence of microphone cavity geometry on beamforming measurements with a turbulent boundary layer present on the microphone array. A 16- microphone array was tested in the anechoic open-jet wind tunnel of the Delft University of Technology. The array was placed on a flat plate mounted flush with the exit nozzle of the...

Design and Evaluation of Microphone Cavity Geometries for Wind-Tunnel Acoustic Measurements

This study investigated how embedding microphones in different cavity geometries reduce the measured turbulent boundary layer pressure fluctuations at the microphones. The cavity geometries were systematically varied using a design of experiments (DOE) methodology. This approach tested different cavity depths, diameters, chamfers, and opening...

Deterministic Model of AcousticWave Propagation in a Cavity

A mathematical model is proposed that evaluates acoustic propagation of turbulent boundary layer waves on top of a cavity enclosing a microphone. The goal is to optimize these cavity geometries to improve the signal-to-noise ratio of acoustic measurements. This model predicts the attenuation of the turbulent boundary layer fluctuations...