Searched for: +
(1 - 20 of 78)

Pages

document
Andrade, D. G. (author), Tankova, T. (author), Zhu, C. (author), Branco, R. (author), da Silva, L. Simões (author), Rodrigues, D. M. (author)
The use of 3D printed stainless steel requires a deep knowledge of its mechanical properties. This paper presents material characterisation of 316LSi austenitic stainless-steel coupons manufactured by CMT-WAAM, considering different deposition directions. The specimens were tested according to ISO 6892-1, the fractures surfaces were examined...
journal article 2024
document
Chen, B. (author), Perumal, Priyadharshini (author), Aghabeyk, F. (author), Adediran, Adeolu (author), Illikainen, Mirja (author), Ye, G. (author)
The pursuit of low-carbon binders as alternatives to Portland cement has sparked interest in developing alkali-activated materials (AAM).<sup>1</sup> Using municipal solid waste incineration (MSWI) bottom ash as precursor for AAM has attracted increasing attention as it offers a sustainable, resource-efficient solution to mitigate the...
review 2024
document
Felicita, M.P. (author), Pagella, G. (author), Ravenshorst, G.J.P. (author), Mirra, M. (author), van de Kuilen, J.W.G. (author)
This case study explores the utilization of distributed fiber optic sensors (DFOS) in wooden foundation piles, for assessing and monitoring the stress distribution along their length. Three spruce and three pine foundation piles instrumented with DFOS were driven into the soil in a testing field in Amsterdam and axially loaded in compression....
journal article 2024
document
Martin Saint-Laurence, P.M. (author), Aguilar, C. (author), Cabrera, J. M. (author)
Refractory high-entropy alloys (RHEAs) are promising candidates for those applications requiring of strong materials at high temperatures with elevated thermal stability and excellent oxidation, irradiation, and corrosion resistance. Particularly, RHEAs synthesized using mechanical alloying (MA) followed by spark plasma sintering (SPS) has...
journal article 2024
document
Lantsoght, E.O.L. (author)
One of the barriers to implementation of steel fiber reinforced concrete (SFRC) into structural applications is the lack of understanding of the shear behaviour of SFRC members. This paper proposes a theoretical model for the shear capacity of SFRC members with mild steel reinforcement based on the shear-carrying mechanisms and sectional...
journal article 2023
document
Xu, Y. (author), Šavija, B. (author)
Auxetic cementitious composites (ACCs) with improved mechanical properties are created, by casting 3D printed polymeric auxetic reinforcement structures inside cementitious mortar. Four types of ACCs incorporating reinforcement with different auxetic mechanisms were prepared: “re-entrant” (RE), “rotating-square” (RS), “chiral” (CR) and ...
journal article 2023
document
Kumar Ashish, Prabin (author), Sreeram, Anand (author), Xu, Xiong (author), Chandrasekar, Pavan (author), Jagadeesh, A. (author), Adwani, Dheeraj (author), Kumar Padhan, Rabindra (author)
The widespread production and consumption of plastics is a pressing global issue that requires multifaceted approaches and solutions. In terms of recycling, one of the ways to repurpose waste plastics in the construction industry would be to utilize them for asphalt pavement-related applications. Although this approach can potentially provide...
review 2023
document
van Overmeir, A.L. (author), Šavija, B. (author), Bos, F. P. (author), Schlangen, E. (author)
With the introduction of 3D concrete printing, research started on how to include reinforcement in 3D printed structures. Initial studies on the implementation of strain hardening cementitious composites (SHCC) as self-reinforcing printable mortars have shown promising results. The development of this new type of SHCC comes with additional...
journal article 2023
document
Xu, Y. (author), Šavija, B. (author)
A composite can have properties much better than the components it is made of. This work proposes a three-dimensional auxetic cementitious-polymeric composite structure (3D-ACPC) which incorporates 3D printed polymeric shell with cementitious mortar. Uniaxial compression experiments are performed on the 3D-ACPC to study their quasi-static...
journal article 2023
document
Sung Lee, Kee (author), Ahn, Hyeonji (author), Won Lee, Gye (author), Sloof, W.G. (author)
Although the crack-healing capacity of Ti<sub>2</sub>AlC ceramics has been sufficiently studied, the ability of Ti<sub>2</sub>AlC to self-heal large-scale damage, such as foreign object damage (FOD), remains unknown. This paper investigates the self-healing ability of Ti<sub>2</sub>AlC ceramics with large-scale damage (∼1000 μm in diameter)....
journal article 2023
document
Jiang, Nengdong (author), Ge, Zhi (author), Guan, Yanhua (author), Zuo, Zhiwu (author), Zhang, Hongzhi (author), Ling, Yifeng (author), Šavija, B. (author)
This work presents a study of mechanical properties of foamed concrete at the meso-scale based on a combination of X-ray computed tomography (XCT) technique and a discrete lattice type fracture model. The microstructure of the foamed concrete with different densities was obtained by XCT technique and binarized as two-phase (pore/solid) materials...
journal article 2022
document
Quan, D. (author), Zhao, Guoqun (author), Scarselli, Gennaro (author), Alderliesten, R.C. (author)
A novel co-curing process was proposed for the bonding of carbon fibre/epoxy composites by replacing traditional epoxy adhesives with carbon fibre/PEEK (CF/PEEK) tapes, with an attempt to improve the structure integrity. The lap-shear strengths, fatigue resistance and mode-I and mode-II fracture behaviour of the co-cured joints at 22 °C and...
journal article 2022
document
Setiadji, Bagus Hario (author), Wibowo, M. Agung (author), Jonkers, H.M. (author), Ottele, M. (author), Qomaruddin, Mochammad (author), Sugianto, Felix Hariyanto (author), Lie, Han Ay (author)
Asphalt pavement consists of aggregates resulting in a waste material at end of its life. The aggregates can be reused as basic material for asphalt or cementitious binding agents. In both scenarios, the recycled aggregates should provide a good bond with the binder to achieve strength. This study focuses on reusing recycled asphalt...
journal article 2022
document
Rosenthal, Michael (author), Rüggeberg, Markus (author), Gerber, Christian (author), Beyrich, Lukas (author), Faludi, Jeremy (author)
Purpose: The purpose of this study is to quantify the vertical shrinkage rates and the mechanical strength of three-dimensional (3D) printed parts for a variety of wood-based materials for liquid deposition modeling. Design/methodology/approach: The overall hypothesis was that a well-chosen combination of binders, fibers and fillers could...
journal article 2022
document
Gençog̃lu, C. (author), Tekog̃lu, C. (author), Ayas, C. (author)
The effects of five different types of imperfection (fractured cell walls, missing cells, cell wall waviness, cell wall misalignment, and non-uniform cell wall thickness) on actuation performance are numerically investigated for the Kagome lattice and two of its variants: Double Kagome (DK) and Kagome with concentric triangles (KT). The...
journal article 2022
document
Bakhit, Babak (author), Dorri, Samira (author), Kosari, A. (author), Mol, J.M.C. (author), Petrov, Ivan (author), Birch, Jens (author), Hultman, Lars (author), Greczynski, Grzegorz (author)
We study microstructure, mechanical, and corrosion properties of Zr<sub>1-x</sub>Cr<sub>x</sub>B<sub>y</sub> coatings deposited by hybrid high-power impulse/DC magnetron co-sputtering (CrB<sub>2</sub>-HiPIMS/ZrB<sub>2</sub>-DCMS). Cr/(Zr + Cr) ratio, x, increases from 0.13 to 0.9, while B/(Zr + Cr) ratio, y, decreases from 2.92 to 1.81. As...
journal article 2022
document
Fu, J. (author)
Oxide dispersion strengthened (ODS) steels are promising candidates for use as structural materials in the next generation fission and fusion reactors. Compared to conventional ferritic or martensitic steels, ODS steels exhibit improved high-temperature creep properties and irradiation resistance. Favourable properties are mainly attributed to...
doctoral thesis 2021
document
Hajizad, O. (author)
In this PhD thesis, we investigated possible steel candidates for use in railway crossings in order to reduce the damage in them. Pearlitic R350HT together with Bainitic grades including CrB, B1400 and carbide free B360 were investigated for their mechanical properties such as ultimate strength, yield strength, ductility and hardness. The...
doctoral thesis 2021
document
Zuo, Chenjia (author), Zhang, Yixiang (author), Tong, Yudong (author), Liu, Yanbo (author)
Synthetic fibers have been widely studied as reinforcing materials to increase the mechanical and durability properties of concrete. According to its diameter, fibers can be categorized as micro and macro (or coarse) fibers. As most research focuses on the mechanical properties of fiber reinforced concrete, its chloride permeability properties...
conference paper 2021
document
Eivani, A.R. (author), Mehdizade, M. (author), Chabok, S. (author), Zhou, J. (author)
Magnesium alloys have many unique properties, mostly benefitting from the low density of magnesium. However, they are not competitive, when compared with other lightweight materials, such as aluminum alloys, particularly in ductility and corrosion resistance. There is a strong need to improve the mechanical properties and corrosion resistance...
journal article 2021
Searched for: +
(1 - 20 of 78)

Pages