Distortion of DNA Origami on Graphene Imaged with Advanced TEM Techniques

While graphene may appear to be the ultimate support membrane for transmission electron microscopy (TEM) imaging of DNA nanostructures, very little is known if it poses an advantage over conventional carbon supports in terms of resolution and contrast. Microscopic investigations are carried out on DNA origami nanoplates that are supported...

Structural tale of two novel (Cr,Mn)C carbides in steel

Chromium (Cr), Manganese (Mn), and Carbon (C) are well known alloying elements used in technologically important alloy steels and advanced high strength steels. It is known that binary CrCx and MnCx carbides can be formed in steels, but in this study we reveal for the first time that Cr and Mn were found combined in novel ternary cementite type ...

In Situ transmission electron microscopy imaging of electromigration in platinum nanowires

In situ transmission electron microscopy was performed on the electromigration in platinum (Pt) nanowires (14 nm thick, 200 nm wide, and 300 nm long) with and without feedback control. Using the feedback control mode, symmetric electrodes are obtained and the gap usually forms at the center of the Pt nanowire. Without feedback control,...

Non-conducting interfaces of LaAlO3/SrTiO3 produced in sputter deposition: The role of stoichiometry

We have investigated the properties of interfaces between LaAlO3 films grown on SrTiO3 substrates singly terminated by TiO2. We used RF sputtering in a high-pressure oxygen atmosphere. The films are smooth, with flat surfaces. Transmission electron microscopy shows sharp and continuous interfaces with some slight intermixing. The elemental ratio...

Novel ultrafine Fe(C) precipitates strengthen transformation-induced-plasticity steel

A transmission electron microscopy study was conducted on nanoprecipitates formed in Ti microalloyed transformation-inducedplasticity-assisted steels, revealing the presence of Ti(N), Ti2CS and a novel type of ultra-fine Fe(C) precipitate. The matrix/precipitate orientation relationships, sizes and shapes were investigated in detail. The...

Micro-fabricated channel with ultra-thin yet ultra-strong windows enables electron microscopy under 4-bar pressure

Transmission electron microscopy (TEM) of (de-)hydrogenation reactions is crucial to characterize efficiency of hydrogen storage materials. The nanoreactor, a micromachined channel with 15-nm-thick windows, effectively confines the gas flow to an electron-transparent chamber during TEM of reactions. Realistic experiments require very high...

Characterization of NbC and (Nb, Ti)N nanoprecipitates in TRIP assisted multiphase steels

Multiphase steels utilising composite strengthening may be further strengthened via grain refinement or precipitation by the addition of microalloying elements. In this study a Nb microalloyed steel comprising martensite, bainite and retained austenite has been studied. By means of transmission electron microscopy (TEM), we have investigated the...

In situ imaging of electromigration-induced nanogap formation by transmission electron microscopy

The authors imaged electromigration-induced nanogap formation in situ by transmission electron microscopy. Real-time video recordings show that edge voids form near the cathode side. The polycrystalline gold wires narrow down until a single-grain boundary intersects the constriction along which the breaking continues. During the last 50?ms of...

Electron-beam-induced deformations of SiO2 nanostructures

The imaging beam of a transmission electron microscope can be used to fine tune critical dimensions in silicon oxide nanostructures. This technique is particularly useful for the fabrication of nanopores with single-nanometer precision, down to 2 nm. We report a detailed study on the effect of electron-beam irradiation on apertures with various...