Pages
- 1
- 2
- document
- Zeng, Q. (author), Liang, H. (author), Zhang, G. (author), Birowosuto, M.D. (author), Tian, Z. (author), Lin, H. (author), Fu, Y. (author), Dorenbos, P. (author), Su, Q. (author) journal article 2006
- document
- Lin, H. (author), Liang, H. (author), Han, B. (author), Zhong, J. (author), Su, Q. (author), Dorenbos, P. (author), Birowosuto, M.D. (author), Zhang, G. (author), Fu, Y. (author), Wu, W. (author) journal article 2007
- document
-
Han, B. (author), Liang, H. (author), Lin, H. (author), Zhong, J. (author), Su, Q. (author), Dorenbos, P. (author), Birowosuto, M.D. (author), Zhang, G. (author), Fu, Y. (author)The phosphors Ba3Gd(BO3)3:Ce3+ were prepared by a solid-state reaction technique at high temperature. The vacuum ultraviolet-ultraviolet and visible spectroscopic properties of the phosphors together with decay time curves are investigated and discussed. The spectroscopic properties are explained by occupancy of Ce3+ at two different Gd sites in...journal article 2007
- document
-
Liang, K. (author), Zhang, Y. (author), Sun, Q. (author), Ruess, M. (author)A knock-down factor is commonly used to take into account the obvious decline of the buckling load in a cylindrical shell caused by the inevitable imperfections. In 1968, NASA guideline SP-8007 gave knock-down factors which rely on a lower-bound curve taken from experimental data. Recent research has indicated that the NASA knock-down factors...journal article 2015
- document
-
Cai, Miao (author), Yang, Daoguo (author), Huang, J. (author), Zhang, Maofen (author), Chen, Xianping (author), Liang, Caihang (author), Koh, S.W. (author), Zhang, Kouchi (author)The color coordinate shift of light-emitting diode (LED) lamps is investigated by running three stress-loaded testing methods, namely step-up stress accelerated degradation testing, step-down stress accelerated degradation testing, and constant stress accelerated degradation testing. A power model is proposed as the statistical model of the...journal article 2017
- document
-
Zhang, Weizhao (author), Bostanabad, Ramin (author), Liang, Biao (author), Su, Xuming (author), Zeng, Danielle (author), Bessa, M.A. (author), Wang, Yanchao (author), Chen, Wei (author), Cao, Jian (author)Carbon fiber reinforced plastics (CFRPs) are attracting growing attention in industry because of their enhanced properties. Preforming of thermoset carbon fiber prepregs is one of the most common production techniques of CFRPs. To simulate preforming, several computational methods have been developed. Most of these methods, however, obtain...journal article 2019
- document
-
Cai, Miao (author), Liang, Yonghu (author), Yun, Minghui (author), Chen, Xuan-You (author), Yan, Haidong (author), Yu, Zhaozhe (author), Yang, Daoguo (author), Zhang, Kouchi (author)A novel silicone rubber elastic key (SREK) is proposed in this paper for surface mounting technology (SMT) applications. Effects of thermal reflowing stress on the mechanical properties of SMT-SREKs are investigated. The manufactured SMT-SREKs, which underwent various reflowing conditions in advance, are subjected to pressing force and...journal article 2019
- document
-
Zhou, Rongfu (author), Ma, Fengkai (author), Su, Fang (author), Ou, Yiyi (author), Qi, Zeming (author), Zhang, Jianhui (author), Huang, Yan (author), Dorenbos, P. (author), Liang, Hongbin (author)RbBaPO4:Eu2+ phosphors have been prepared by a high-temperature solid-state reaction method, and the structure was determined by Rietveld refinement based on powder X-ray diffraction (P-XRD) data. Their VUV-UV-vis photoluminescence properties are systematically investigated with three objectives: (1) based on low-temperature spectra, we...journal article 2020
- document
-
Liang, Hongqin (author), Liu, Pengfei (author), Wang, Tianlong (author), Wang, Haoyu (author), Zhang, Kailong (author), Cao, Yunqiang (author), An, Dong (author)For a heavy-haul locomotive within a wheel repairing period, wheel polygonal wear with different operating mileages is obtained by field testing. The test results show that the maximum radial runout of the wheel can increase to 0.87 mm and accompany with the typical damage of wheel tread shelling. Taking the wheel polygons as input excitation...journal article 2020
- document
-
Zhou, X. (author), van Gelder, P.H.A.J.M. (author), Liang, Yongtu (author), Zhang, Haoran (author)As the main way for the long-distance transportation of refined products, multi-products pipelines are of vital importance to the regional energy security. The supply reliability evaluation of multi-product pipeline systems can improve the effective response to unexpected disruptions and guarantee the reliable oil supply. Based on reliability...journal article 2020
- document
-
Lu, Jieyu (author), Qiu, Yubao (author), Wang, Xingxing (author), Liang, Wenshan (author), Xie, Pengfei (author), Shi, Lijuan (author), Menenti, M. (author), Zhang, Dongshui (author)The High Mountain Asia (HMA) region, ranging from the Hindu Kush and Tien Shan in the west to the Himalaya in the south with an altitude between 2000 and 8844 m, holds the largest reservoir of glaciers and snow outside Earth Polar Regions. In the last decades, numerous glaciers and lake areas there have undergone tremendous changes with water...journal article 2020
- document
-
Li, Z. (author), Zhang, Shizhe (author), Liang, X. (author), Ye, G. (author)This study aims to investigate the cracking potential of alkali-activated slag (AAS) and alkali-activated slag-fly ash (AASF) concrete subjected to restrained autogenous shrinkage. Temperature Stress Testing Machine (TSTM) is utilized, for the first time, to monitor the stress evolution and to measure the cracking time of alkali-activated...journal article 2020
- document
-
Li, Z. (author), Zhang, Shizhe (author), Liang, X. (author), Granja, José (author), Azenha, Miguel (author), Ye, G. (author)This study investigates the influences of internal curing on reducing the autogenous shrinkage of alkali-activated slag/fly ash (AASF) paste. The influences of internal curing with superabsorbent polymers (SAPs) on the reactions and microstructure of AASF paste are investigated. It is found that the SAPs absorb liquid mainly before the...journal article 2020
- document
-
Gan, Y. (author), Zhang, Hongzhi (author), Liang, M. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)In this study, a numerical model using a 2D lattice network is developed to investigate the fatigue behaviour of cement paste at the microscale. Images of 2D microstructures of cement pastes obtained from XCT tests are used as inputs and mapped to the lattice model. Different local mechanical and fatigue properties are assigned to different...journal article 2021
- document
-
Li, Z. (author), Zhang, Shizhe (author), Liang, X. (author), Kostiuchenko, A. (author), Ye, G. (author)Alkali activated concrete (AAC) has not received broader industry acceptance, one reason of which lies in the uncertainties in the durability against shrinkage and potential cracking. Many studies reported that AAC exhibit larger autogenous shrinkage than OPC concrete. However, it is unable to deduce that AAC should show higher cracking...book chapter 2021
- document
-
He, Daojing (author), Du, Runmeng (author), Zhu, Shanshan (author), Zhang, Min (author), Liang, K. (author), Chan, Sammy (author)Data island effectively blocks the practical application of machine learning. To meet this challenge, a new framework known as federated learning was created. It allows model training on a large amount of scattered data owned by different data providers. This article presents a parallel solution for computing logistic regression based on...journal article 2022
- document
-
Zhang, Y. (author), Liang, M. (author), Gan, Y. (author), Copuroglu, Oguzhan (author)Slag rim mainly consists of secondary precipitations such as C–S–H gel phase and hydrotalcite-like phase, which originate from the hydration of slag. In this paper, the micro-mechanical properties of slag rim were characterized by nanoindentation in combination with SEM. It was found that, compared to the C–S–H gel phase, slag rim showed about a...journal article 2022
- document
-
Liang, Peijie (author), Pan, Zhiliang (author), Tang, Liang (author), Zhang, Kouchi (author), Yang, Daoguo (author), He, Siliang (author), Yan, Haidong (author)Based on molecular dynamics (MD), in this study, a model was established to simulate the initial coating morphology of silver paste by using a random algorithm, and the effects of different sizes of particles on sintering porosity were also analyzed. The MD result reveals that compared with the sintering process using large-scale silver...journal article 2022
- document
-
Chang, Z. (author), Zhang, Hongzhi (author), Liang, M. (author), Schlangen, E. (author), Šavija, B. (author)This paper explores buildability quantification of randomly meshed 3D printed concrete objects by considering structural failure by elastic buckling. The newly proposed model considers the most relevant printing parameters, including time-dependent material behaviors, printing velocity, localized damage and influence of sequential printing...journal article 2022
- document
-
Zhang, Jianguo (author), Jiang, Zaixing (author), Liang, Chao (author), Baars, T.F. (author), Wang, Y. (author), Abels, H.A. (author)The middle Eocene Dongying sag in the Bohai Bay Basin of China has an estimated shale oil resource of approximately 1.1 billion t (8.06 billion bbl); flows of shale oil have been produced in the succession from tens of wells, where the daily production of a single well generally varies between 10 and 100 t (73.3–733 bbl). Therein, the mudrock...journal article 2022
Pages
- 1
- 2