Searched for: +
(1 - 20 of 156)

Pages

document
Zhan, H. (author), Mol, J.M.C. (author), Terryn, H.A. (author), De Wit, J.H.W. (author)
Application prospects in automotive and aerospace industry have led to extensive studies on AA6xxx alloys in recent years because of their attractive combinations of properties. The benefits include formability, weldability, high strength to weight ratio and low cost. The main alloying elements in the commercial AA6xxx are Mg, Si, Fe and Cu. Mg...
journal article 2007
document
Mol, J.A. (author), Van der Heijden, J. (author), Verduijn, J. (author), Klein, M. (author), Remacle, F. (author), Rogge, S. (author)
Ternary logic has the lowest cost of complexity, here, we demonstrate a CMOS hardware implementation of a ternary adder using a silicon metal-on-insulator single electron transistor. Gate dependent rectifying behavior of a single electron transistor (SET) results in a robust three-valued output as a function of the potential of the single...
journal article 2011
document
Mol, J.A. (author), Salfi, J. (author), Miwa, J.A. (author), Simmons, M.Y. (author), Rogge, S. (author)
Understanding the electronic properties of dopants near an interface is a critical challenge for nanoscale devices. We have determined the effect of dielectric mismatch and quantum confinement on the ionization energy of individual acceptors beneath a hydrogen passivated silicon (100) surface. While dielectric mismatch between the vacuum and the...
journal article 2013
document
Koleva, D.A. (author), Van Breugel, K. (author), Mol, J.M.C. (author), De Wit, J.H.W. (author)
journal article 2009
document
Koleva, D.A. (author), Zhang, X. (author), Petrov, P. (author), Boshkov, N. (author), Van Breugel, K. (author), De Wit, J.H.W. (author), Mol, J.M.C. (author), Tsvetkova, N. (author)
This study reports on a comparative investigation of the corrosion behavior of zinc (Zn) and nano-composite zinc (ZnC) galvanic layers in 5% NaCl solution. The metallic matrix of the ZnC layers incorporates nano-sized, stabilized polymeric aggregates, formed from the amphiphilic tri-block co-polymer: poly(2-hydroxyethyl methacrylate) - poly ...
journal article 2008
document
Zhang, X. (author), Beentjes, P. (author), Mol, A. (author), Terryn, H. (author)
In this paper, we report on the studies of the local corrosion behaviour of chromium-coated ultra low carbon steel in NaCl solution using polarization, electrochemical impedance spectroscopy (EIS) and SVET.
journal article 2006
document
Mol, L. (author), Rocha, L.A. (author), Cretu, E. (author), Wolffenbuttel, R.F. (author)
This paper provides experimental validation of the predictions by two recent models for squeezed film damping in the free molecule regime. Measurements were carried out using a parallel-plate microstructure with a 2.29 ?m gap operated at pressures from 105 to 101 Pa (corresponding to Knudsen numbers from 0.03 to 300). Experiments are in good...
journal article 2009
document
De Graaf, G. (author), Mol, L. (author), Rocha, L.A. (author), Cretu, E. (author), Wolffenbuttel, R.F. (author)
journal article 2005
document
Koleva, D.A. (author), Taheri, P. (author), Tsvetkova, N. (author), Boshkov, N. (author), Van Breugel, K. (author), De Wit, J.H.W. (author), Mol, J.M.C. (author)
This paper reports on the corrosion performance of composite zinc layers (~ 8µm) on a steel substrate, considering the influence of nano-aggregates and Cr(III) conversion layers, compared to control (only Zn layers) conditions. The main factors, influencing the corrosion performance of Zn in this study are: a) the effect of two concentrations of...
journal article 2011
document
Deng, Z. (author), Mol, S. (author), Van der Hoek, J.P. (author)
The heating of drinking water in households contributes significantly to the emission of greenhouse gases. As a water utility aiming to operate at a climate neutral level by 2020, Waternet needs to reduce its CO2 emission by 53?kton?yr?1. To contribute to this ambition, a pilot project was carried out in Uilenstede, Amstelveen, the Netherlands,...
journal article 2016
document
Koleva, D.A. (author), Van Breugel, K. (author), Boshkov, N. (author), Mol, J.M.C. (author), De Wit, J.H.W. (author)
This work reports on monitoring chloride-induced corrosion in reinforced mortar specimens, with and without addition of polymeric nano-aggregates in the mortar mixture. The investigation is a novel approach to control steel corrosion in reinforced concrete, hereby reporting the preliminary results, related to one of the main objectives: studying...
journal article 2010
document
Koleva, D.A. (author), Van Breugel, K. (author), De Wit, J.H.W. (author), Mol, A. (author)
journal article 2010
document
Koleva, D.A. (author), Van Breugel, K. (author), Mol, J.M.C. (author), De Wit, J.H.W. (author)
journal article 2009
document
Johnson, B.C. (author), Tettamanzi, G.C. (author), Alves, A.D.C. (author), Thompson, S. (author), Yang, C. (author), Verduijn, J. (author), Mol, J.A. (author), Wacquez, R. (author), Vinet, M. (author), Sanquer, M. (author), Rogge, S. (author), Jamieson, D.N. (author)
We demonstrate single dopant implantation into the channel of a silicon nanoscale metal-oxide-semiconductor field-effect-transistor. This is achieved by monitoring the drain current modulation during ion irradiation. Deterministic doping is crucial for overcoming dopant number variability in present nanoscale devices and for exploiting single...
journal article 2010
document
Rocha, L.A. (author), Mol, L. (author), Cretu, E. (author), Wolffenbuttel, R.F. (author), Machado da Silva, J. (author)
A test technique for capacitive MEMS accelerometers and electrostatic microactuators, based on the measurement of pull-in voltages and resonance frequency, is described. Using this combination of measurements, one can estimate process-induced variations in the device layout dimensions as well as deviations from nominal value in material...
journal article 2008
document
Johnson, B.C. (author), Alves, A. (author), Van Donkelaar, J. (author), Thompson, S. (author), Yang, C. (author), Jamieson, D. (author), Verduijn, A. (author), Mol, J. (author), Tettamanzi, G. (author), Rogge, S. (author), Wacquez, R. (author), Vinet, M. (author), Dzurak, A. (author)
journal article 2010
document
Koleva, D.A. (author), Van Breugel, K. (author), Mol, J.M.C. (author), De Wit, J.H.W. (author)
journal article 2009
document
Naddaf Dezfuli, S. (author), Huan, Z. (author), Mol, J.M.C. (author), Leeflang, M.A. (author), Chang, J. (author), Zhou, J. (author)
The human body is a buffered environment where pH is effectively maintained. HEPES is a biological buffer often used to mimic the buffering activity of the body in in vitro studies on the degradation behavior of magnesium. However, the influence of HEPES on the degradation behavior of magnesium in the DMEM pseudo-physiological solution has not...
journal article 2014
document
Johnson, B.C. (author), Tettamanzi, G.C. (author), Yang, C. (author), Alves, A.D.C. (author), Van Donkelaar, J. (author), Thompson, S. (author), Verduijn, J. (author), Mol, J.A. (author), Wacquez, R. (author), Vinet, M. (author), Dzurak, A.S. (author), Sanquer, M. (author), Rogge, S. (author), Jamieson, D.N. (author)
Deterministic doping is crucial for overcoming dopant number variability in present nano-scale devices and for exploiting single atom degrees of freedom. The development of determinisitic doping schemes is required. Here, two approaches to the detection of single ion impact events in Si-based devices are reviewed. The first is via specialized...
journal article 2010
document
Klein, M. (author), Mol, J.A. (author), Verduijn, J. (author), Lansbergen, G.P. (author), Rogge, S. (author), Levine, R.D. (author), Remacle, F. (author)
We provide an experimental proof of principle for a ternary multiplier realized in terms of the charge state of a single dopant atom embedded in a fin field effect transistor (Fin-FET). Robust reading of the logic output is made possible by using two channels to measure the current flowing through the device and the transconductance. A read out...
journal article 2010
Searched for: +
(1 - 20 of 156)

Pages