Post-buckling behavior and collapse of Double-Double composite single stringer specimens

This paper presents the work on six single-stringer specimens manufactured using the card-sliding technique with non-crimp fabrics and adopting a Double-Double (DD) stacking sequence. These specimens, representative of sub-structure level components, are used to investigate post-buckling and failure in aerospace structures. Two specimens...

Dataset on the tested and simulated response of thick cold-formed circular hollow sections under cyclic loading

This article describes a dataset used to calibrate a finite element model of a thick circular hollow section (CHS) with varying d/t (diameter to thickness) ratio under cyclic loading which may be used as a computational model validation benchmark by researchers working on similar problems in structural and mechanical engineering. The test...

Warpage deformation analysis of AMB ceramic substrates in power modules

Driven by the increasing demand for high-power systems, ceramic substrates have received more attention for handling higher power density. Warpage in active metal brazed (AMB) ceramic substrate becomes a critical issue as it can deteriorate the reliability performance. This study comprises three phases, including investigation of the cause of...

Multi Physics Simulation of Wafer Bonding with Nano Copper Paste

The significance of wafer bonding is fundamental to the progression of electronic systems. Common fabrication techniques for Cu pillars play a crucial role in establishing resilient and efficient interconnects within semiconductor devices. It is imperative to explore the potential of nano-copper as an alternative material to overcome limitations...

Impact damage of composite laminates with high-speed waterjet

Rain erosion may cause substantial damage to aircrafts during supersonic flight. Such event is investigated here via high-speed waterjet impact on composite laminates. An experimental setup is developed to produce waterjets with the speed up to 700m/s and a finite element model of the waterjet-composite impact event is established. The...

Finite element modeling and analysis of ultrasonic bonding process of thick aluminum wires for power electronic packaging

Ultrasonic wedge bonding of aluminum (Al) wires is a widely applied interconnect technology for power electronic packaging. The joint quality of the wedge bonding is mainly affected by the process parameters and material properties. Inappropriate process parameters will lead to failure modes such as chip surface pit, metal layer peeling off,...

Structural analysis of Heinz Isler’s bubble shell

This paper presents a detailed structural analysis of a bubble shell engineered by Heinz Isler. Through 3D scanning the geometry of this shell structure has become available to the authors. Structural analysis has not been possible before since the geometry of the shell was not available. The bubble shell was Isler’s most built type of shell. In...

Experimental and numerical investigation of damage development in embedded rail system under longitudinal force

Embedded rail system (ERS) is a new type of track structure with many advantages due to its continuous rail support. The rapid development of urban rail transit all over the world renders its application prospect broad. However, the cracks and debonds in ERS present a threat to the traffic safety and a possibility for high maintenance costs....

Shear capacity of a novel joint between corrugated steel web and concrete lower slab

Composite girder with corrugated steel web is one of the promising concrete-steel hybrid structures with superior properties and cost effectiveness widely applied in highway and railway bridges. The connection between concrete slabs and corrugated steel web is an important part of such composite structure. In order to improve pouring quality...