Predicting micromechanical properties of cement paste from backscattered electron (BSE) images by computer vision

This paper employs computer vision techniques to predict the micromechanical properties (i.e., elastic modulus and hardness) of cement paste based on an input of Backscattered Electron (BSE) images. A dataset comprising 40,000 nanoindentation tests and 40,000 BSE micrographs was built by express nanoindentation test and Scanning Electron...

Micro-Mechanical Properties of Slag Rim Formed in Cement–Slag System Evaluated by Nanoindentation Combined with SEM

Slag rim mainly consists of secondary precipitations such as C–S–H gel phase and hydrotalcite-like phase, which originate from the hydration of slag. In this paper, the micro-mechanical properties of slag rim were characterized by nanoindentation in combination with SEM. It was found that, compared to the C–S–H gel phase, slag rim showed about a...

Flexural strength and fatigue properties of interfacial transition zone at the microscale

In this study, the flexural strength and fatigue properties of interfacial transition zone (ITZ) were experimentally investigated at the micrometre length scale. The hardened cement paste cantilevers (150 × 150 × 750 μm³) attached to a quartzite aggregate surface were prepared and tested under the monotonic and cyclic load using a...

Effect of MgO content on the quantitative role of hydrotalcite-like phase in a cement-slag system during carbonation

This paper reports the carbonation characteristics of a cement-slag system exposed to accelerated carbonation testing, and its improved carbonation resistance with the increasing MgO content in blast furnace slag, in which hydrotalcite-like phase plays a key role. Our research showed that the hydrotalcite-like phase started to carbonate upon...

A numerical study of fatigue of hardened cement paste at the microscale

In this study, a numerical model using a 2D lattice network is developed to investigate the fatigue behaviour of cement paste at the microscale. Images of 2D microstructures of cement pastes obtained from XCT tests are used as inputs and mapped to the lattice model. Different local mechanical and fatigue properties are assigned to different...