Searched for: +
(1 - 20 of 32)

Pages

List view
Grid view
document
Brouwer, W.S. (author), Wang, Y. (author), van Leijen, F.J. (author), Hanssen, R.F. (author)
InSAR enables the estimation of displacements of (objects on) the earth's surface. To provide reliable estimates, both a stochastic and mathematical model are required. However, the intrinsic problem of InSAR is that both are unknown. Here we derive the Variance-Covariance Matrix (VCM) for double differenced phase observations for an arc, i.e...
conference paper 2023
document
Mooren, Noud (author), Witvoet, Gert (author), Oomen, T.A.E. (author)
Data-driven feedforward control for tracking of varying and non-resetting point-to-point references requires continuous updating of feedforward parameters instead of task-by-task updating. The aim of this paper is to develop an adaptive feedforward controller for non-resetting point-to-point motion tasks by a data-driven feedforward...
journal article 2023
document
Zhu, G. (author), Dong, J. (author), Bauer, P. (author)
It is ideal for the wireless power transfer (WPT) systems to operate at the resonance state for better transmission performance. In practice, however, the parameters of the resonant circuits often deviate because of the capacitance drift and coil misalignment. To this end, this paper proposes a new parameter estimation method for the WPT systems...
conference paper 2023
document
Cunillera, A. (author), Bešinović, Nikola (author), Lentink, Ramon M. (author), van Oort, N. (author), Goverde, R.M.P. (author)
The dynamics of a moving train are usually described by means of a motion model based on Newton's second law. This model uses as input track geometry data and train characteristics like mass, the parameters that model the running resistance, the maximum tractive effort and power, and the brake rates to be applied. It can reproduce and predict...
journal article 2023
document
Lao-Martil, David (author), Verhagen, K.J.A. (author), Valdeira Caetano, Ana H. (author), Pardijs, Ilse H. (author), van Riel, Natal A.W. (author), Wahl, S.A. (author)
Microbial metabolism is strongly dependent on the environmental conditions. While these can be well controlled under laboratory conditions, large-scale bioreactors are characterized by inhomogeneities and consequently dynamic conditions for the organisms. How Saccharomyces cerevisiae response to frequent perturbations in industrial...
journal article 2023
document
Irmak, T. (author)
By 2050 a large proportion of the cars on our roads will be self-driving and completely automated. We will no longer be driving these vehicles, but will be transported comfortably as passengers. We will be able to indulge in all sorts of media items in our vehicles, do work, or even just relax and sleep. Indeed, these fully automated vehicles...
doctoral thesis 2022
document
Evensen, Geir (author), Amezcua, Javier (author), Bocquet, Marc (author), Carrassi, Alberto (author), Farchi, Alban (author), Fowler, Alison (author), Houtekamer, Pieter L. (author), Jones, Christopher K. (author), Vossepoel, F.C. (author)
This work demonstrates the efficiency of using iterative ensemble smoothers to estimate the parameters of an SEIR model. We have extended a standard SEIR model with age-classes and compartments of sick, hospitalized, and dead. The data conditioned on are the daily numbers of accumulated deaths and the number of hospitalized. Also, it is possible...
journal article 2021
document
Cleij, D. (author)
Humans always wanted to go faster and higher than their own legs could carry them, leading them to invent numerous types of vehicles to move fast over land, water and air. As training how to handle such vehicles and testing new developments can be dangerous and costly, vehicle motion simulators were invented. <br/>Motion-based simulators in...
doctoral thesis 2020
document
Obergfell, C.C.A. (author)
The objective of this thesis is twofold: to develop time series analysis methods for the estimation of aquifer parameters and recharge to be used in groundwater models and to develop time series analysis methods for the identification and quantification of a regime change.<br/>In Chapter 2, a pumping test is replaced by time series analysis of...
doctoral thesis 2020
document
Dong, Jianfei (author), Wang, T. (author)
Light therapies can be used to treat fungal infections. A general mechanism is attributed to the generation of cytotoxic reactive oxygen species (ROS) due to light stimulation. The effectiveness of these therapies has been widely studied in the literature via conducting biological experiments, where fungi are exposed to light with various...
journal article 2020
document
Yao, Yu (author), Huang, Yunkai (author), Peng, Fei (author), Dong, J. (author)
In this article, a position sensorless drive and online parameter estimation method for surface-mounted permanent magnet synchronous machines-based on adaptive full-state feedback current control is proposed. The position sensorless drive is established by the detection of the back-electromotive force in the gamma delta synchronous reference...
journal article 2020
document
Vijn, A.R.P.J. (author), Lepelaars, Eugene (author), Dubbeldam, J.L.A. (author), van Gijzen, M.B. (author), Heemink, A.W. (author)
This paper presents a parameter estimation method to determine the linear behavior of an object constructed of thin plates. Based on the magnetostatic field equations, an integral equation is derived that fully determines the induced magnetization, whenever the spatial magnetic susceptibility distribution is known. This forward problem is...
journal article 2019
document
Chugh, T. (author), Bruzelius, F. (author), Klomp, M. (author), Shyrokau, B. (author)
In this paper, a methodology to capture the model-based haptic feedback control reference for closed-loop steering systems is demonstrated. The parameterisation is based on the measurements of open-loop driving manoeuvres for the inertia-spring-damper-friction reference model. The steady-state and transient manoeuvres are used to identify the...
journal article 2019
document
Magalhaes de Medeiros, E. (author), Posada Duque, J.A. (author), Noorman, H.J. (author), Filho, Rubens Maciel (author)
Syngas fermentation is one of the bets for the future sustainable biobased economies due to its potential as an intermediate step in the conversion of waste carbon to ethanol fuel and other chemicals. Integrated with gasification and suitable downstream processing, it may constitute an efficient and competitive route for the valorization of...
journal article 2019
document
van der El, Kasper (author), Pool, D.M. (author), van Paassen, M.M. (author), Mulder, Max (author)
Due to linear perspective, the visual stimulus provided by a previewed reference trajectory reduces with increasing distance ahead. This paper investigates the effects of linear perspective on human use of preview in manual control tasks. Results of a human-in-the-loop tracking experiment are presented, where the linear perspective&amp;#x0027...
journal article 2018
document
Pasma, J.H. (author), Assländer, Lorenz (author), van Kordelaar, J. (author), de Kam, Digna (author), Mergner, Thomas (author), Schouten, A.C. (author)
The Independent Channel (IC) model is a commonly used linear balance control model in the frequency domain to analyze human balance control using system identification and parameter estimation. The IC model is a rudimentary and noise-free description of balance behavior in the frequency domain, where a stable model representation is not...
journal article 2018
document
van der El, Kasper (author), Padmos, S. (author), Pool, D.M. (author), van Paassen, M.M. (author), Mulder, Max (author)
In manual control tasks, preview of the target trajectory ahead is often limited by poor lighting, objects, or display edges. This paper investigates the effects of limited preview, or preview time, in manual tracking tasks with single- and double-integrator controlled element dynamics. A quasi-linear human controller model is used to predict...
journal article 2018
document
Nijzink, R.C. (author), Almeida, S. (author), Pechlivanidis, I. G. (author), Capell, R. (author), Gustafssons, D. (author), Arheimer, B. (author), Parajka, J. (author), Freer, J. (author), Han, D. (author), Wagener, T. (author), van Nooijen, R.R.P. (author), Savenije, Hubert (author), Hrachowitz, M. (author)
The calibration of hydrological models without streamflow observations is problematic, and the simultaneous, combined use of remotely sensed products for this purpose has not been exhaustively tested thus far. Our hypothesis is that the combined use of products can (1) reduce the parameter search space and (2) improve the representation of...
journal article 2018
document
Drop, F.M. (author), Pool, D.M. (author), van Paassen, M.M. (author), Mulder, Max (author), Bülthoff, Heinrich H. (author)
Realistic manual control tasks typically involve predictable target signals and random disturbances. The human controller (HC) is hypothesized to use a feedforward control strategy for target-following, in addition to feedback control for disturbance-rejection. Little is known about human feedforward control, partly because common system...
journal article 2017
document
Nie, X. (author), Zhang, J. (author), Huang, H. (author), Liu, Z. (author), Lacasse, S. (author)
In the past few years, random field theory has been increasingly used to model the inherent soil variability. The scale of fluctuation is one of the important parameters describing a stationary random field. In this study, the factors affecting an accurate estimation of the scale of fluctuation were studied with numerical experiments to show how...
conference paper 2015
Searched for: +
(1 - 20 of 32)

Pages

List view
Grid view