Naturally effective inhibition of microbial corrosion on carbon steel by beneficial biofilm in the South China Sea

Microbially influenced corrosion (MIC) of metals exerts a negative effect on the marine environment and causes a great loss of marine facilities. Corrosion prevention in an eco-friendly and sustainable way is a difficult problem to address, especially in the marine environment. In this work, Nocardiopsis dassonville, a corrosive bacteria...

Stretchable strain sensor based on HfSe₂/LIG composite with high sensitivity and good linearity within a wide range

Flexible strain sensors based on nanomaterials have sparked a lot of interest in the field of wearable smart electronics. Laser induced graphene (LIG) based sensors in particular stand out due to their straightforward fabrication procedure, three-dimensional porous structures, and exceptional electromechanical capabilities. Recent studies...

Intrinsic-Strain Engineering by Dislocation Imprint in Bulk Ferroelectrics

We report an intrinsic strain engineering, akin to thin filmlike approaches, via irreversible high-temperature plastic deformation of a tetragonal ferroelectric single-crystal BaTiO3. Dislocations well-aligned along the [001] axis and associated strain fields in plane defined by the [110]/[1¯10] plane are introduced into the volume, thus...

Microwave Heating Healing of Asphalt Mixture with Coal Gangue Powder and Basalt Aggregate

Microwave heating is an effective method to achieve autonomic crack healing in asphalt mixtures, and the use of microwave-absorbing materials can largely improve this healing efficiency. As a solid waste, coal gangue contains metal oxides, which shows the possibility of microwave heating. In order to further promote the application of coal...

Improving the strength-ductility balance of medium-Mn Q&P steel by controlling cold-worked ferrite microstructure

The phase transformations, microstructure and properties of two Medium-Mn processed via quenching and partitioning steels were compared in this contribution and a new strategy for controlling mechanical properties by introducing and controlling cold-worked ferrite prior to heat treatment is proposed. It was found that during heating, the...

Investigation of the moisture damage and the erosion depth on asphalt

Moisture erosion is one of the key factors leading to asphalt pavement damage, and the erosion depth indicates the moisture damage level but it is usually neglected. In order to study the moisture erosion and the erosion depth, this study characterized the chemical structure, rheological property and adhesion property of asphalt at different...

A Hybrid Modulation Featuring Two-phase Clamped Discontinuous PWM and Zero Voltage Switching for 99% Efficient DC-Type EV Charger

Two-stage AC-DC converters are considered as a prominent solution for DC-type electric vehicle (EV) chargers. However, this kind of architecture suffers from high switching losses with large heatsink and DC-link capacitor volume. To relieve this issue, this paper presents a new hybrid modulation for DC-type EV chargers, where a two-phase...

A Carrier-based Two-Phase-Clamped DPWM Strategy With Zero-Sequence Voltage Injection for Three-Phase Quasi-Two-Stage Buck-Type Rectifiers

A three-phase buck-type rectifier features a step-down ac-dc conversion function, which is considered as a prominent solution for electric vehicle chargers and telecommunication systems integrated to the grid above 380 V line to line. However, traditional solutions for those applications employ cascaded architectures with an ac-dc boost-type...

IGA-Reuse-NET: A deep-learning-based isogeometric analysis-reuse approach with topology-consistent parameterization[Formula presented]

In this paper, a deep learning framework combined with isogeometric analysis (IGA for short) called IGA-Reuse-Net is proposed for efficient reuse of numerical simulation on a set of topology-consistent models. Compared with previous data-driven numerical simulation methods only for simple computational domains, our method can predict high...

Mechanical responses of a fiberglass flexible pipe subject to tension & internal pressure

Composite structures, such as the fiberglass reinforced structure studied in this paper, have been normally treated in previous research as homogeneous anisotropic laminated plates regarding the investigation of their mechanical properties. Throughout this paper, this specific structure is considered in a different way in which the fiberglass...

Modification on the chloride binding capacity of alkali activated slag by applying calcium and aluminium containing phases

In this study, a modified alkali activated slag system is designed by introducing additional calcium and aluminum containing phases in the binder, aiming at promote the formation of Friedel's salt (Fs) within the reaction products and therefore achieve a better chloride binding capacity. The effect of calcium and alumina contents on phase...

Investigation of the Rheological Properties and Chemical Structure of Asphalt under Multiple Aging Conditions of Heat, UV and Aqueous Solution

During the service period, asphalt materials are affected by various natural factors, including heat, ultraviolet light, oxygen and moisture, etc., resulting in the reduction of pavement performance, the increase of pavement distress and shortening of service life. This study aims to investigate the aging performance of asphalt under multiple...

Carbon Dots Embedded in Cellulose Film: Programmable, Performance-Tunable, and Large-Scale Subtle Fluorescent Patterning by in Situ Laser Writing

Fluorescent patterns with multiple functions enable high-security anti-counterfeiting labels. Complex material synthesis and patterning processes limit the application of multifunctional fluorescent patterns, so the technology of in situ fluorescent patterning with tunable multimodal capabilities is becoming more necessary. In this work, an...

Carrier-based Generalized Discontinuous PWM Strategy for Single-Phase Three-Legs Active Power Decoupling Converters

Three-legs active power decoupling (APD) converters are widely studied in the single-phase grid-connected systems to enhance the circuit lifetime by creating an alternative path for the typical existing dc-side power pulsating ripple. Therefore, this reduces the requirement of smoothing dc capacitors allowing compact designs even with the...

Analysis of the mechanical properties of a fibreglass reinforced flexible pipe (FGRFP)

Fibreglass reinforced flexible pipe (FGRFP) is a kind of composite thermoplastic pipe serving as a preferred application in the field of oil transportation. This paper studies the mechanical behaviour of FGRFPs under pure bending by experimental, numerical and theoretical methods. Full-scale four-point bending tests are conducted and the...

Unified Binary Generative Adversarial Network for Image Retrieval and Compression

Binary codes have often been deployed to facilitate large-scale retrieval tasks, but not that often for image compression. In this paper, we propose a unified framework, BGAN+, that restricts the input noise variable of generative adversarial networks to be binary and conditioned on the features of each input image, and simultaneously learns...

In Situ transmission electron microscopy imaging of electromigration in platinum nanowires

In situ transmission electron microscopy was performed on the electromigration in platinum (Pt) nanowires (14 nm thick, 200 nm wide, and 300 nm long) with and without feedback control. Using the feedback control mode, symmetric electrodes are obtained and the gap usually forms at the center of the Pt nanowire. Without feedback control,...