A simple and low cost system to measure delay times in pneumatic systems

It is often necessary to correct for delay times in the units of a measurement channel, especially in the case of flight tests. In a pressure measurement channel the sensing orifice is connected to the transducer by a pressure line which may be several meters in length. In this case the pneumatic delay time might well be the major contribution...

Boundary-layer effects in unsteady pressure measurements with tubes

An experimental investigation revealed that the d5mamic response of a given pressure tube depends not only on the mean local pressure and the frequency, but also on the pressure amplitude and the boundary-layer at the tube entrance. By analyzing the flow at the entrance of the tube, the parameters are determined, which possibly play a role in...

Synthesis of local control for a robotic manipulator joint

The objective of the study is the synthesis of an algorithm for the automatic control of an electromechanical actuator in the rotational joint of a multi-link, robotic manipulator. Control performance is assessed in terms of ability of the controlled joint to follow a commanded joint angle, or a commanded joint angular rate. Part One of the...

Failures in advanced flight control systems of future transport aircraft

Future transport aircraft will be different from to-day's in that they will be designed to be statically neutrally stable or even unstable to improve economics, while the stability will be provided by means of a fly-by-wire flight control system. Since this system will be flight critical it is necessary to develop a philosophy on the treatment...

An introductory course on aircraft loading

The present course book has been prepared as lecture notes for a summer course given at the Technical University of Bandung (ITB) in the summer of 1984. This course took place within the framework of the TTA-79 Technical Assistance Project as agreed between the Governments of Indonesia and the Netherlands. The subjects of the course are listed...

Aircraft design loads due to non-stationary atmospheric turbulence patches

In this report it is assumed that atmospheric turbulence appears in patches and that within the patches the turbulence can be described.as a modulated Gaussian process. The patch lengths have a certain probability density function. Load exceedance curves and design loads for various aircraft models for this turbulence model are compared with...

Some investigations on the notching procedtire used in shaker tests on satellites

The notching procedure as used in the shaker test on a satellite is critically examined. In stead of the notching procedure an alternative test set-up, in which the dynamic interaction between launcher and spacecraft is taken into account, has been proposed and investigated for a simple model of launcher and satellite. Using this test set-up the...

Equations for the response of an airplane to non-stationary atmospheric turbulence patches

In this report a method is described to calculate the load exceedance curve for a linear system having a finite, modulated Gaussian process as input. The derivation is based on the use of ensemble averages, defined as the expected values at a certain point of time. The equations can be used for any airplane-transfer function for which the Power...