A conceptual design of two-stream alkali-activated materials

To properly control the reaction kinetics and fresh properties evolution in conventional alkali-activated materials (AAMs), a conceptual design of two-stream AAMs has been proposed in this study. This is achieved by dividing the solid and liquid components in AAMs, including blast furnace slag (BFS) and electric arc furnace slag (EFS)...

Rheology of alkali-activated slag pastes: New insight from microstructural investigations by cryo-SEM

This study aims to interpret the early-stage rheology of alkali-activated slag (AAS) paste from microstructure perspectives. The microstructures visualized by cryogenic scanning electron microscopy (cryo-SEM) revealed the essential distinction between hydroxide and silicate-activated slag pastes. The hydroxide-based mixture showed typical...

Fracture properties and microstructure formation of hardened alkali-activated slag/fly ash pastes

This study presents a comprehensive experimental investigation on the fracture properties of hardened alkali-activated slag/fly ash (AASF) pastes in relation to the microstructure formation and reaction product composition. The main reaction product in AASF is C-(N-)A-S-H gel along with minor hydrotalcite phase, with the polymerization of C-...

Internal curing of alkali-activated slag-fly ash paste with superabsorbent polymers

This study investigates the influences of internal curing on reducing the autogenous shrinkage of alkali-activated slag/fly ash (AASF) paste. The influences of internal curing with superabsorbent polymers (SAPs) on the reactions and microstructure of AASF paste are investigated. It is found that the SAPs absorb liquid mainly before the...

Waste glass as partial mineral precursor in alkali-activated slag/fly ash system

The feasibility of a waste glass powder residue (GP) from glass recycling as partial mineral precursor to produce alkali-activated materials is investigated. GP served as powder coal fly ash (PCFA) replacement within a reference system composed of 50% PCFA and 50% ground granulated blast furnace slag (GGBS). Compared with PCFA, GP was better...

Experimental study on pore connectivity and its influence on chloride transport in saturated cementitious system

The purpose of this paper is to investigate the pore connectivity and its influence on chloride transport property in cementitious materials under saturated condition. Mercury intrusion porosimetry experiment was carried out on a variety of hydrated cement pastes curing up to one year. By repeating pressurization-depressurization cycles, pore...