Searched for: +
(1 - 20 of 167)

Pages

document
Yang, F. (author), Fu, Dafang (author), Zevenbergen, C. (author), Boogaard, Floris C. (author), Singh, Rajendra Prasad (author)
Evaluation of the hydrological performance of grassed swales usually needs long-term monitoring data. At present, suitable techniques for simulating the hydrological performance using limited monitoring data are not available. Therefore, current study aims to investigate the relationship between saturated hydraulic conductivity (K<sub>s</sub>...
journal article 2024
document
Fu, Runnan (author), Pađen, I. (author), Garcia Sanchez, C. (author)
Due to lack of information and long geometry generation times, tree geometries are usually oversimplified or even ignored in Computational Fluid Dynamic (CFD) simulations that predict wind and pollutant dispersion in urban areas. Nevertheless, trees are known to impact local wind patterns and air quality levels. Thus, in this paper we explore...
journal article 2024
document
Yu, Hao (author), Fu, Jiabo (author), Wang, Chenchong (author), Chen, Yinping (author), Wang, Lingyu (author), Fang, Haixing (author), Li, Jinguo (author), van der Zwaag, S. (author), Xu, Wei (author)
To achieve an effective design of additively manufacturable Ni superalloys with decent service performance, a hybrid computational design model has been developed, where the strategy to tailor local elemental segregations was integrated within a scheme of minimizing the cracking susceptibility. More specifically, the phase boundary of primary...
journal article 2024
document
Li, M. (author), Saedy, S. (author), Fu, S. (author), Stellema, T.P. (author), Kortlever, R. (author), van Ommen, J.R. (author)
Extending the lifetime of electrocatalytic materials is a major challenge in electrocatalysis. Here, we employ atomic layer deposition (ALD) to coat the surface of carbon black supported platinum nanoparticles (Pt/CB) with an ultra-thin layer of silicon dioxide (SiO2) to prevent deactivation of the catalyst during H2 evolution. Our results show...
journal article 2024
document
Wu, J. (author), Li, S. (author), Fu, A. (author), Cvetkovic, M. (author), Palensky, P. (author), Vasquez, Juan C. (author), Guerrero, Josep M. (author)
The increasing proportion of renewable energy introduces both long-term and short-term uncertainty to power systems, which restricts the implementation of energy management systems (EMSs) with high dependency on accurate prediction techniques. A hierarchical online EMS (HEMS) is proposed in this paper to economically operate the Hybrid...
journal article 2024
document
Cheibas, Ina (author), Laot, Mathilde (author), Rich, Belinda (author), Fu, J. (author), Zhu, Jia-Ning (author), Popovich, V. (author)
This study investigated the feasibility of in-situ manufacturing of a functionally graded metallic-regolith multimaterial. To fabricate the gradient, digital light processing, an additive manufacturing technique, and spark plasma sintering were selected due to their compatibility with metallic-ceramic processing in a space environment. The...
book chapter 2024
document
Li, Meng (author), Li, Chao (author), Wu, Guanyin (author), An, Xizhong (author), Zhang, Hao (author), Fu, Haitao (author), Yang, Xiaohong (author), Zou, Qingchuan (author), Wu, Yongli (author), Dong, Kejun (author)
An in-depth exploration of the reaction kinetics and thermo-chemical behaviors of the raceway can offer practical insights for optimizing the operations of blast furnace (BF), thus achieving a more effective iron and steel production process. In this study, the dynamic characteristics and the flow, heat and mass transfer behaviors in the BF...
journal article 2024
document
Ji, Y. (author), Fu, Xiaoqian (author), Ding, Feng (author), Xu, Yongtao (author), He, Yang (author), Ao, Min (author), Xiao, Fulai (author), Chen, Dihao (author), Dey, P. (author), Qin, Wentao (author), Xiao, Kui (author), Ren, Jingli (author), Kong, Decheng (author), Li, Xiaogang (author), Dong, Chaofang (author)
Efficiently designing lightweight alloys with combined high corrosion resistance and mechanical properties remains an enduring topic in materials engineering. Due to the inadequate accuracy of conventional stress-strain machine learning (ML) models caused by corrosion factors, a novel reinforcement self-learning ML algorithm combined with...
journal article 2024
document
Fu, S. (author)
This dissertation explores the integration of clean energy and electrochemical CO2 reduction to address environmental issues. Metal-free nitrogen-doped carbon materials, derived from renewable biomass, emerge as efficient catalysts for CO2 reduction, offering sustainability and cost-effectiveness. Chapters delve into methods of N-doped biochar...
doctoral thesis 2023
document
Fu, Mingyan (author)
Organic micropollutants (OMPs) that occur in the aquatic environment at trace levels are emerging concerns to society. Domestic wastewater is an important source. OMPs end up in surface water and groundwater via conventional municipal wastewater treatment plants (WWTPs), penetrating drinking water. Comprising pharmaceuticals, personal care...
doctoral thesis 2023
document
Xie, Fangyun (author), Fu, Xinyue (author), Huang, R. (author)
Off-site construction (OSC) is an innovative construction method. However, OSC is not widely applied in residential buildings due to many barriers. Therefore, this paper aims to unravel this puzzle and interpret the slow development of OSC. The paper develops a new analytical lens based on the ecosystem concept. By deconstructing some ecosystem...
journal article 2023
document
Fu, Xinyue (author), Zhuang, Taozhi (author), Huang, R. (author), Dong, Yaxian (author)
Introduction: Resident participation has gained increasing prominence and significance in the pursuit of sustainable neighborhoods regeneration. However, the current state of resident participation practices remains beset by several challenges, which present formidable impediments to the initiation and execution of neighborhood regeneration...
journal article 2023
document
van der Hoek, J.P. (author), Fausta, N. (author), Fu, Mingyan (author), Heijman, Sebastiaan (author), Rietveld, L.C. (author)
Verwijdering van organische microverontreinigingen uit huishoudelijk afvalwater, waaronder medicijnresten, staat sterk in de belangstelling om de oppervlaktewater kwaliteit te verbeteren, de drinkwaterbronnen te beschermen en te voldoen aan toekomstige EU richtlijnen. In minder dan vijf jaar is AdOx, een technologie waarin adsorptie en oxidatie...
journal article 2023
document
Ma, Yuwei (author), Gong, Jihao (author), Ye, G. (author), Fu, Jiyang (author)
The high autogenous shrinkage of alkali-activated fly ash/slag (AASF) poses a significant concern for the widespread application of AASF in structural engineering. The present study compares the efficacy of activator and mineral admixtures in mitigating the autogenous shrinkage of AASF, and discusses the underlying mechanism. The results show...
journal article 2023
document
Fu, J. (author), Nunez, Alfredo (author), De Schutter, B.H.K. (author)
To ensure the reliability of power systems, the independent system operator (ISO) manages the planning process of the maintenance of generation units for generation companies (GENCOs). This paper focuses on a widely studied two-layer long-term predictive maintenance decision making framework in a deregulated environment. In the first layer...
journal article 2023
document
Zhang, Xinqi (author), Shi, Jihao (author), Yang, M. (author), Huang, Xinyan (author), Usmani, Asif Sohail (author), Chen, Guoming (author), Fu, Jianmin (author), Huang, Jiawei (author), Li, Junjie (author)
Long short-term memory (LSTM) has been widely applied to real-time automated natural gas leak detection and localization. However, LSTM approach could not provide the interpretation that this leak position is localized instead of other positions. This study proposes a leakage detection and localization approach by integrating the attention...
journal article 2023
document
Fu, S. (author), Li, M. (author), Asperti, S. (author), de Jong, W. (author), Kortlever, R. (author)
N-doped carbon materials can be efficient and cost-effective catalysts for the electrochemical CO<sub>2</sub> reduction reaction (CO<sub>2</sub>RR). Activators are often used in the synthesis process to increase the specific surface area and porosity of these carbon materials. However, owing to the diversity of activators and the differences...
journal article 2023
document
van den Berg, D. (author), Izelaar, B. (author), Fu, S. (author), Kortlever, R. (author)
Most research into electrochemical CO2 conversion focusses on improving electrode materials, but neglects the role of the electrolyte. We show the buffer influence on the selectivity of a bimetallic gold–palladium electrode in an effort to elucidate observed inconsistencies between different studies. While hydrocarbons are produced in the...
journal article 2023
document
Tao, Y. (author), Petrović, A. (author), van Ham, M. (author), Fu, Xingxing (author)
Residential self-selection studies argue that pre-existing travel-related attitude overshadows the role of changes in residential built environment in (re)shaping travel behaviours. Our study contributes to this self-selection argument by including family- and job-related life events as another self-selection source, and accounting for the...
journal article 2023
document
Yang, F. (author), Fu, Dafang (author), Zevenbergen, C. (author), Boogaard, Floris C. (author), Singh, Rajendra Prasad (author)
Saturated hydraulic conductivity (K<sub>s</sub>) of the filler layer in grassed swales are varying in the changing environment. In most of the hydrological models, K<sub>s</sub> is assumed as constant or decrease with a clogging factor. However, the K<sub>s</sub> measured on site cannot be the input of the hydrological model directly....
journal article 2023
Searched for: +
(1 - 20 of 167)

Pages