Revealing the influence of Mo addition on interphase precipitation in Ti-bearing low carbon steels

Mo is widely used as an effective microalloying element to improve mechanical performance of interphase precipitation steels, but the precise role of Mo in interphase precipitation behavior is not fully understood. In this contribution, interphase precipitation behavior in a series of Ti-Mo-bearing low carbon steels is systematically studied,...

Ca-modified Al–Mg–Sc alloy with high strength at elevated temperatures due to a hierarchical microstructure

Al-Mg alloys are normally prone to lose part of their yield and tensile strength at high temperatures due to insufficient thermal stability of the microstructure. Here, we present a Ca-modified Al–Mg–Sc alloy demonstrating high strength at elevated temperatures. The microstructure contains Al₄Ca phases distributed as a network...

Precipitation of supersaturated solute in H ion irradiated Fe-Au and Fe-Au-W alloys studied by positron annihilation spectroscopy

The effect of thermal aging of homogenized Fe-Au and Fe-Au-W alloys, irradiated at room temperature with hydrogen ions, was studied for an aging treatment at 300 °C for aging times up to 100 h. The aging behavior of the Fe-based alloys is compared to the results for pure Fe. The precipitation behavior of Au-rich and W-rich precipitates and...

Self healing of radiation-induced damage in Fe–Au and Fe–Cu alloys: Combining positron annihilation spectroscopy with TEM and ab initio calculations

Self healing of early stage radiation damage by site selective solute segregation is a promising approach to extend the lifetime of nuclear reactor components. In the present study, the creation and autonomous healing of irradiation-induced damage is investigated in pure Fe and high purity Fe–Au and Fe–Cu model alloys. To create radiation...

Mediation of high temperature radiation damage in bcc iron by Au or Cu precipitation

High temperature radiation damage in binary bcc Fe alloys containing 1 atomic % Au or Cu due to Fe ion irradiation at 550 °C to a peak dose of 2.8 and 8.3 dpa is studied. The precipitation behavior of gold and copper and its correlation to the irradiation-induced defects is studied by transmission electron microscopy and variable energy...

Damage evolution in a self-healing air plasma sprayed thermal barrier coating containing self-shielding MoSi ₂ particles

A self‐healing thermal barrier coating (TBC) system is manufactured by air plasma spraying (APS) and tested by thermal cycling. The ceramic topcoat in the self‐healing APS TBC system consists of an yttria stabilised zirconia (YSZ) matrix and contains self‐shielding aluminium containing MoSi2 healing particles dispersed close to the topcoat/bond...

Analysis of the interaction between moving α/γ interfaces and interphase precipitated carbides during cyclic phase transformations in a Nb-containing Fe-C-Mn alloy

The interaction between moving α/γ interfaces and interphase precipitated (IPd) carbides during the austenite (γ) to ferrite (α) and the ferrite (α) to austenite (γ) transformation has been systematically investigated through cyclic phase transformation experiments for a 0.1C-1.5Mn alloy containing 0.1 wt% Niobium (Nb) and its Nb-free...

Thermo – mechanical properties of SPS produced self-healing thermal barrier coatings containing pure and alloyed MoSi₂ particles

Yttria – partially stabilised zirconia (YPSZ) MoSi₂ composites have been designed to prolong the lifetime of the matrix by self – healing cracks during thermal cycling. The healing reaction at high temperatures is based on the decomposition of MoSi₂, leading to a volumetrically expanding reaction product, which seals the...

Determination of the intrinsic α/γ interface mobility during massive transformations in interstitial free Fe-X alloys

Kinetics of the austenite (γ) to ferrite (α) transformation and the reverse ferrite (α) to austenite (γ) transformation in a series of Fe-X (X = Ni, Mn and Co) binary alloys has been experimentally and theoretically investigated. A transition from partitioning to partitionless transformation has been predicted to occur during both the γ→α and...

Autonomous filling of grain-boundary cavities during creep loading in Fe-Mo alloys

We have investigated the autonomous repair of creep damage by site-selective precipitation in a binary Fe-Mo alloy (6.2 wt pct Mo) during constant-stress creep tests at temperatures of 813 K, 823 K, and 838 K (540 °C, 550 °C, and 565 °C). Scanning electron microscopy studies on the morphology of the creep-failed samples reveal irregularly...