Searched for: +
(1 - 20 of 43)

Pages

document
Tang, Hongyu (author), Shi, Weiqi (author), Zhang, Rongjun (author), Fan, J. (author), Zhang, Kouchi (author)
Tungsten disulfide (WS2) has recently attracted considerable attention owing to its excellent physical, chemical, electronic, and optical properties, leading to increased research into its applications in electronic and optoelectronic devices. However, the oxidation of 2D material affects significantly its optical and electronic properties...
conference paper 2024
document
Tang, Z. (author), Pan, S. (author), Makinwa, K.A.A. (author)
BJT-based temperature sensors are widely used because they can achieve excellent accuracy after 1-point calibration. However, they typically dissipate mu textWs of power and require supply voltages above 1V [1]. Although sensors based on DTMOSTs [2], [3], capacitively biased (CB) diodes and BJTs [4,5] have demonstrated sub-1V operation, this...
conference paper 2023
document
Yue, X. (author), Javvaji, L.S. (author), Tang, Z. (author), Makinwa, K.A.A. (author), Du, S. (author)
Synchronized bias-flip rectifiers, such as synchronized switch harvesting on inductor (SSHI) rectifiers, are widely used for piezoelectric energy harvesting (PEH) [1], which can replace the use of batteries in many loT applications, thus reducing both system volume and maintenance cost. However, the output power extracted by such rectifiers...
conference paper 2023
document
Toth, N.G. (author), Tang, Z. (author), Someya, T. (author), Pan, S. (author), Makinwa, K.A.A. (author)
BJT-based temperature sensors are widely used due to their high accuracy over a wide temperature range with a low-cost 1-point trim. Although resistor-based sensors can achieve better energy efficiency, they typically require a 2-point trim to achieve comparable accuracy, while thermal-diffusivity based sensors achieve superior accuracy at...
conference paper 2023
document
Tang, Z. (author), Toth, N.G. (author), Brito Zamparette, R.L. (author), Nezuka, Tomohiro (author), Furuta, Yoshikazu (author), Makinwa, K.A.A. (author)
Low-cost metal (e.g., PCB trace) shunts can be used to make accurate current sensors (< 1 % gain error) [1-3]. However, their reported maximum operating temperature (85 circC) is not high enough for automotive applications, and at higher temperatures, shunt resistance may exhibit increased drift, especially at high current levels. This...
conference paper 2023
document
Yu, G. (author), Tang, J. (author), Li, L. (author), Rossen, W.R. (author)
The main objective of this study is to understand the vertical sweep efficiency with miscible CO2-water-coinjection as a secondary recovery method, from multiple perspectives: phase behavior, total relative mobility, fluid densities/viscosities, the driving forces and consequent phase distributions etc. We also seek to provide insights into...
conference paper 2023
document
Martin, H.A. (author), Reintjes, Marcia (author), Reijs, Dave (author), Dorrestein, Sander (author), Kengen, Martien (author), Libon, Sebastien (author), Smits, Edsger (author), Tang, Xiao (author), Koelink, Marco (author), Poelma, René H. (author), van Driel, W.D. (author), Zhang, Kouchi (author)
Integrated Circuits and Electronic Modules experience concentrated thermal hot spots, which require advanced thermal solutions for effective distribution and dissipation of heat. The superior thermal properties of diamonds are long known, and it is an ideal material for heat-spreading applications. However, growing diamond films to the...
conference paper 2023
document
Tang, Rui (author), Riemens, E.H.J. (author), Rajan, R.T. (author)
Multi-agent networks are known for their scalability, robustness, flexibility, and are typically tasked with a variety of tasks such as target tracking, surveillance, traffic control, and environmental monitoring. Distributed Particle Filters (DPF) are often employed when the for non-linear parameter estimation with non-Gaussian noise. In this...
conference paper 2023
document
Tang, Zhuorui (author), Tian, Jing (author), Mao, Chaobin (author), Zhang, Nan (author), Huang, Jiyu (author), Fan, J. (author), Zhang, Kouchi (author)
Silicon carbide (SiC) epitaxial process is a key step in the fabrication of power devices, and the temperature field inside the reactor chamber plays an essential role in this process. In this paper, the temperature field in the horizontal chemical-vapor-deposition reactor chamber used for growing homo-epitaxial 4H-SiC material is studied using...
conference paper 2023
document
Tang, X. (author), Schulte, F. (author)
Storage space management in bulk terminals has become an important focus for research and practical operation due to the increasing demand for bulk cargo and limited storage space in stockyards. The study of storage space management in dry bulk terminals is less thorough and comprehensive, and the existing research investigates the storage...
conference paper 2023
document
Tang, Jinyu (author), Castaneda, Pablo (author), Marchesin, Dan (author), Rossen, W.R. (author)
Foam is remarkably effective in the mobility control of gas injection for enhanced oil recovery (EOR) processes and CO<sub>2</sub> sequestration. Our goal is to better understand immiscible three-phase foam displacement with oil in porous media. In particular, we investigate (i) the displacement as a function of initial (I) and injection (J)...
conference paper 2022
document
Fan, Jiajie (author), Qian, Yichen (author), Chen, Wei (author), Jiang, Jing (author), Tang, Zhuorui (author), Fan, Xuejun (author), Zhang, Kouchi (author)
A fan-out panel-level packaging (FOPLP) with an embedded redistribution layer (RDL) via interconnection reduces the size, thermal resistance, and parasitic inductance of power module packaging. In this study, the effect of the RDL via size on the reliability of a FOPLP SiC MOSFET power module was investigated. To improve the thermal management...
conference paper 2022
document
de Winkel, J. (author), Tang, Haozhe (author), Pawełczak, Przemysław (author)
We present an architecture for intermittently-powered wireless communication systems that does not require any changes to the official protocol specification. Our core idea is to save the intermediate state of the wireless protocol to non-volatile memory within each connection interval. The protocol state is then deterministically restored at...
conference paper 2022
document
Li, Xiao (author), Tang, Jiuyang (author), Zhao, Jiayan (author), Li, Jinbing (author), Zhang, Kouchi (author), Liu, Pan (author)
With the development of 5G communication technology and the rise of power semiconductors, the switching frequency of the circuit keeps increasing, which pushes for miniaturization of power modules and related components. Therefore, in this paper, a one-step molding technology was proposed for a DC/DC buck converter power module. We proposed a...
conference paper 2022
document
Tang, Z. (author), Brito Zamparette, R.L. (author), Furuta, Yoshikazu (author), Nezuka, Tomohiro (author), Makinwa, K.A.A. (author)
Accurate current sensing is critical in many industrial applications, such as battery management and motor control. Precise shunt-based current sensors have been reported with gain errors of less than 1% over the industrial temperature range (-40°C to 85°C) [1]–[4]. However, since they are intended for coulomb counting, their bandwidth is...
conference paper 2022
document
Tang, Shi Yuan (author), Oliehoek, F.A. (author), Irissappane, Athirai A. (author), Zhang, Jie (author)
Cross-Entropy Method (CEM) is a gradient-free direct policy search method, which has greater stability and is insensitive to hyperparameter tuning. CEM bears similarity to population-based evolutionary methods, but, rather than using a population it uses a distribution over candidate solutions (policies in our case). Usually, a natural...
conference paper 2021
document
Hu, Liang (author), Tang, Y. (author), Zhou, Z. (author), Pan, W. (author)
This paper presents a deep reinforcement learning (DRL) algorithm for orientation estimation using inertial sensors combined with a magnetometer. Lyapunov’s method in control theory is employed to prove the convergence of orientation estimation errors. The estimator gains and a Lyapunov function are parametrised by deep neural networks and...
conference paper 2021
document
Ma, Bingtao (author), Liu, Hongsen (author), Nan, L. (author), Tang, Xu (author), Fan, Huijie (author), Cong, Yang (author)
The 3D mesh is an important representation of geometric data. It is widely used in computer graphics and has attracted more attention in computer vision community recently. However, in the generation of mesh data, geometric deficiencies (e.g., duplicate elements, degenerate faces, isolated vertices, self-intersection, and inner faces) are...
conference paper 2021
document
Cassottana, Beatrice (author), Aydin, N.Y. (author), Tang, Loon Ching (author)
Water Distribution Systems (WDSs) are critical infrastructures for providing water to sustain life and human activities. Some recent trends, such as climate change, urbanization, and increasing system interdependence, have led to more frequent threats, with detrimental effects on WDSs. In recent years, resilience has been considered an effective...
conference paper 2020
document
Xu, Junzhong (author), Gao, Fei (author), Soeiro, Thiago B. (author), Chen, Linglin (author), Tarisciotti, Luca (author), Tang, Houjun (author), Bauer, P. (author)
The implementation of traditional finite-control-set model predictive control (FCS-MPC) with variable switching frequency in voltage source rectifiers (VSRs) can make the system suffer from poor current harmonics performance. In fact, the resulting wide-spread voltage harmonic generated at the AC terminals makes the design of the typical multi...
conference paper 2020
Searched for: +
(1 - 20 of 43)

Pages