Effect of Hot Isostatic Pressing on the Microstructure of Directionally Solidified Nickel Alloy After SLM

The paper investigates the effect of hot isostatic pressing of single-crystal nickel-based alloy manufactured by selective laser melting (SLM) with a high-temperature substrate preheating. A study of the structure and phase composition of the material before and after treatment has been carried out. It was found that as a result of such...

Heat treatment effect on the structure formation of directionally solidified nickel alloy after SLM

The aim of this study was to determine the influence of heat treatment on the microstructure of single-crystal nickel-based alloy manufactured by selective laser melting with a high-temperature substrate preheating. The change of gamma/gamma prime -phases ratio was established as a result of various heat treatment modes.

Effects of heat treatment on microstructure and properties of selective laser melted titanium aluminide alloy

Titanium aluminide alloys are considered to be attractive materials for aerospace and automotive high-temperature applications due to their high specific strength, creep resistance, and heat resistance. However, their brittleness makes it difficult to manufacture complex-shaped components of these alloys using conventional processes making...

Cracks formation in nickel-based single crystal alloy manufactured by selective laser melting

The aim of this study was to determine the influence of selective laser melting (SLM) process parameters on the formation of cracks in nickel-based single crystal alloy. Several sets of laser scanning parameters, with varied laser power, scanning speed and hatch distance, thus resulting in different volumetric and linear energy densities,...

Microstructure and mechanical properties of tial-based alloy produced by selective laser melting

Additive Manufacturing (AM) is an attractive way of producing parts of intermetallic titanium alloys. However, high brittleness of these alloys makes it challenging to produce crack-free intermetallic parts by AM. One way to overcome this problem is to use high-temperature powder-bed preheating. In this paper, Ti-48Al-2Cr-2Nb alloy was...

High-precision motion system design by topology optimization considering additive manufacturing

In the design process of high-precision motion stages, the dynamic behavior is of paramount importance. Manual design of such a stage is a time-consuming process, involving many iterations between engineers responsible for mechanics, dynamics and control. By using topology optimization in combination with additive manufacturing, post...

The influence of surface deformation on thermocapillary flow instabilities in low Prandtl melting pools with surfactants

Heat and fluid flow in low Prandtl number melting pools during laser processing of materials are sensitive to the prescribed boundary conditions, and the responses are highly nonlinear. Previous studies have shown that fluid flow in melt pools with surfactants can be unstable at high Marangoni numbers. In numerical simulations of molten metal...

Additive manufacturing for circular product design: A literature review from a design perspective

Circular product design is a relatively new approach to design suitable strategies to realize circular products. Additive manufacturing (AM) is seen as a promising enabling production process. It has digital and additive characteristics, which makes AM different from conventional production techniques. However, it is yet unclear how this...