Molecular dynamics and experimental study on the adhesion mechanism of polyvinyl alcohol (PVA) fiber in alkali-activated slag/fly ash

This paper aims to study the adhesion mechanism of polyvinyl alcohol (PVA) fiber within alkali-activated slag/fly ash (AASF) matrix using molecular dynamics (MD) simulation in combination with systematic experimental characterization. The adhesion of PVA to C-(N-)A-S-H gel with different Ca/(Si+Al) and Al/Si ratios was modeled using MD...

Fracture properties and microstructure formation of hardened alkali-activated slag/fly ash pastes

This study presents a comprehensive experimental investigation on the fracture properties of hardened alkali-activated slag/fly ash (AASF) pastes in relation to the microstructure formation and reaction product composition. The main reaction product in AASF is C-(N-)A-S-H gel along with minor hydrotalcite phase, with the polymerization of C-...

Effect of metakaolin on the autogenous shrinkage of alkali-activated slag-fly ash paste

The high autogenous shrinkage of alkali-activated materials made from slag and fly ash is recognised as a major drawback with regard to the use as construction materials. In this study, metakaolin was introduced into the alkali-activated slag-fly ash (AASF) paste to mitigate the autogenous shrinkage. The shrinkage mitigation mechanism of...

RILEM TC 247-DTA round robin test: carbonation and chloride penetration testing of alkali-activated concretes

Many standardised durability testing methods have been developed for Portland cement-based concretes, but require validation to determine whether they are also applicable to alkali-activated materials. To address this question, RILEM TC 247-DTA ‘Durability Testing of Alkali-Activated Materials’ carried out round robin testing of carbonation...

Micromechanics-guided development of a slag/fly ash-based strain-hardening geopolymer composite

Strain-hardening geopolymer composite (SHGC) lately emerged as a promising alternative to traditional strain-hardening cementitious composite with added advantages of industrial by-product utilization and enhanced sustainability. However, as the design of SHGC requires multi-factor optimization, the application of traditional trial-and-error...

Mechanisms of autogenous shrinkage of alkali-activated slag and fly ash pastes

This study aims to provide a better understanding of the autogenous shrinkage of slag and fly ash-based alkali-activated materials (AAMs) cured at ambient temperature. The main reaction products in AAMs pastes are C-A-S-H type gel and the reaction rate decreases when slag is partially replaced by fly ash. Due to the chemical shrinkage and the...

RILEM TC 247-DTA round robin test: mix design and reproducibility of compressive strength of alkali-activated concretes

The aim of RILEM TC 247-DTA ‘Durability Testing of Alkali-Activated Materials’ is to identify and validate methodologies for testing the durability of alkali-activated concretes. To underpin the durability testing work of this committee, five alkali-activated concrete mixes were developed based on blast furnace slag, fly ash, and flash-calcined...

Waste glass as partial mineral precursor in alkali-activated slag/fly ash system

The feasibility of a waste glass powder residue (GP) from glass recycling as partial mineral precursor to produce alkali-activated materials is investigated. GP served as powder coal fly ash (PCFA) replacement within a reference system composed of 50% PCFA and 50% ground granulated blast furnace slag (GGBS). Compared with PCFA, GP was better...