Fast 3D ground penetrating radar simulations for glaciers

Modeling ground penetrating radar (GPR) reflection data on glaciers with methods that require the discretization of the full subsurface domain is extremely computationally expensive because of the combination of a large domain size and the comparatively short wavelength of the signal. To address this issue, we build on and extend a previously...

Inversino of controlled-source electromagnetic reflection responses

Marine controlled-source electromagnetic reflection responses can be retrieved by interferometry. These reflection responses are free of effects related to the water layer and the air above it and do not suffer from uncertainties related to the source position and orientation. Interferometry is a data-driven process requiring proper sampling of...

Considerations about the solution space of a VTI marine CSEM Inversion problem using vertical antennas

We exploit the randomness of a genetic inversion algorithm to map the global minimum of the solution space of Controlled-Source Electromagnetic inversion problems. In this study, we focus on the information content that vertical electric or magnetic receivers could add to solve for anisotropic conductivities of the subsurface. By analyzing the...

Creating virtual vertical radar profiles from surface reflection ground penetrating radar data

Modeling of GPR data in a stack of VTI-layers with an analytical code

The electromagnetic response in a layered vertical transverse isotropic medium: A new look at an old problem

We determined that the electromagnetic vertical transverse isotropic response in a layered earth can be obtained by solving two equivalent scalar equations, which were for the vertical electric field and for the vertical magnetic field, involving only a scalar global reflection coefficient. Besides the complete derivation of the full...

Seismoelectric wave propagation modeling for typical laboratory configurations: A numerical validation

The seismoelectric effect can be of importance for hydrocarbon exploration as it is complementary to conventional seismics. Besides enabling seismic resolution and electromagnetic sensitivity at the same time, the seismoelectric method can also provide us with additional, high-value information like porosity and permeability. However, very...

Probing the solution space of an EM inversion problem with a genetic algorithm

In an inversion for the subsurface conductivity distribution using frequency-domain Controlled-Source Electromagnetic data, various amounts of horizontal components may be included. We investigate which combination of components are best suited to invert for a vertical transverse isotropic (VTI) subsurface. We do this by probing the...

Overview of marine controlled-source electromagnetic interferometry by multidimensional deconvolution

Interferometry by multidimensional deconvolution for marine Controlled-Source Electromagnetics can suppress the direct field and the airwave in order to increase the detectability of the reservoir. For monitoring, interferometry by multidimensional deconvolution can increase the source repeatability. We give an overview over the method and...

3D Marine CSEM Interferometry by Multidimensional Deconvolution in the Wavenumber Domain for a Sparse Receiver Grid

We use interferometry by multidimensional deconvolution in combination with synthetic aperture sources in 3D to suppress the airwave and the direct field, and to decrease source uncertainty in marine Controlled-Source electromagnetics. We show with this numerical study that the method works for very large receiver spacing distances, even though...

Electromagnetic interferometry in wavenumber and space domains in a layered earth

With interferometry applied to controlled-source electromagnetic data, the direct field and the airwave and all other effects related to the air-water interface can be suppressed in a data-driven way. Interferometry allows for retreival of the scattered field Green’s function of the subsurface or, in other words, the subsurface reflection...

Synthesized 2D CSEM-interferometry Using Automatic Source Line Determination

Interferometry by multidimensional deconvolution applied to Controlled-Source Electromagnetic data replaces the medium above the receivers by a homogeneous halfspace, suppresses the direct field and redatums the source positions to the receiver locations. In that sense, the airwave and any other interactions of the signal with the air-water...

Increasing the sensitivity of controlled-source electromagnetics with synthetic aperture

Controlled-source electromagnetics (CSEM) has been used as a derisking tool in the hydrocarbon exploration industry. We apply the concept of synthetic aperture to the lowfrequency electromagnetic field in CSEM. Synthetic aperture sources have been used in radar imaging for many years. Using the synthetic aperture concept, big synthetic sources...

Effects of the airwave in time-domain marine controlled-source electromagnetics

In marine time-domain controlled-source electromagnetics (CSEM), there are two different acquisition methods: with horizontal sources for fast and simple data acquisition or with vertical sources for minimizing the effects of the airwave. Illustrations of the electric field as a function of space and time for various source antenna orientations,...

Time-lapse controlled-source electromagnetics using interferometry

In time-lapse controlled-source electromagnetics, it is crucial that the source and the receivers are positioned at exactly the same location at all times of measurement. We use interferometry by multidimensional deconvolution (MDD) to overcome problems in repeatability of the source location. Interferometry by MDD redatums the source to a...

Green's tensors for the diffusive electric field in a VTI half-space

Synthetic aperture controlled source electromagnetics

Controlled?source electromagnetics (CSEM) has been used as a de?risking tool in the hydrocarbon exploration industry. Although there have been successful applications of CSEM, this technique is still not widely used in the industry because the limited types of hydrocarbon reservoirs CSEM can detect. In this paper, we apply the concept of...