Pages
- 1
- 2
- document
-
Long, Lingege (author), Li, Qingxiang (author), Gan, Zhenkun (author), Mu, Jun (author), Overend, M. (author), Zhang, Dayu (author)The building sector has gained significant attention due to its remarkably high energy consumption and greenhouse gas emissions. In China's rural areas, stone is a popular building material, but there are unprecedented demands to improve the life-cycle performance of stone buildings. It is essential to preserve the original architectural...journal article 2023
- document
-
Liang, M. (author), He, S. (author), Gan, Yidong (author), Zhang, Hongzhi (author), Chang, Z. (author), Schlangen, E. (author), Šavija, B. (author)This paper employs computer vision techniques to predict the micromechanical properties (i.e., elastic modulus and hardness) of cement paste based on an input of Backscattered Electron (BSE) images. A dataset comprising 40,000 nanoindentation tests and 40,000 BSE micrographs was built by express nanoindentation test and Scanning Electron...journal article 2023
- document
-
Xiao, Hong (author), Zhang, Zhihai (author), Zhu, Yajie (author), Gan, Tiancheng (author), Wang, Haoyu (author)Before the operation of newly constructed railways, tamping and stabilizing machines should be used to improve the quality of ballast beds. With the expansion of the railway network and increase of speeds and axle loads, higher quality and efficiency for tamping and stabilizing operation are required. However, previous studies did not involve...journal article 2023
- document
-
Zhang, Y. (author), Liang, M. (author), Gan, Y. (author), Copuroglu, Oguzhan (author)Slag rim mainly consists of secondary precipitations such as C–S–H gel phase and hydrotalcite-like phase, which originate from the hydration of slag. In this paper, the micro-mechanical properties of slag rim were characterized by nanoindentation in combination with SEM. It was found that, compared to the C–S–H gel phase, slag rim showed about a...journal article 2022
- document
-
Gan, Naifeng (author), Sun, S.Z. (author), Zhang, Zhaosheng (author), Xu, Shiqi (author), Liu, Peng (author), Qin, Z. (author)The overdischarge can significantly degrade a lithium-ion (Li-ion) battery's lifetime. Therefore, it is important to detect the overdischarge and prevent severe damage of the Li-ion battery. Depending on the battery technology, there is a minimum voltage (cutoff voltage) that the battery is allowed to be discharged in common practice. Once the...journal article 2022
- document
-
Gan, Y. (author), Zhang, Hongzhi (author), Liang, M. (author), Zhang, Y. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)In this study, the flexural strength and fatigue properties of interfacial transition zone (ITZ) were experimentally investigated at the micrometre length scale. The hardened cement paste cantilevers (150 × 150 × 750 μm<sup>3</sup>) attached to a quartzite aggregate surface were prepared and tested under the monotonic and cyclic load using a...journal article 2022
- document
-
Zhang, Y. (author), Liang, M. (author), Gan, Y. (author), Copuroglu, Oguzhan (author)This paper reports the carbonation characteristics of a cement-slag system exposed to accelerated carbonation testing, and its improved carbonation resistance with the increasing MgO content in blast furnace slag, in which hydrotalcite-like phase plays a key role. Our research showed that the hydrotalcite-like phase started to carbonate upon...journal article 2022
- document
-
Gan, Y. (author), Romero Rodriguez, C. (author), Zhang, Hongzhi (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)This paper presents a method to numerically investigate the microstructural effect on the creep behavior of cement paste at the microscale. The lattice fracture model is extended to consider local time-dependent deformations of calcium-silicate-hydrate phases in the cement paste by imposing local forces. The term “experimentally informed...journal article 2021
- document
-
Gan, Y. (author), Zhang, Hongzhi (author), Liang, M. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)In this study, a numerical model using a 2D lattice network is developed to investigate the fatigue behaviour of cement paste at the microscale. Images of 2D microstructures of cement pastes obtained from XCT tests are used as inputs and mapped to the lattice model. Different local mechanical and fatigue properties are assigned to different...journal article 2021
- document
-
Gan, Y. (author), Zhang, Hongzhi (author), Zhang, Y. (author), Xu, Y. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)This study presents an experimental investigation of fatigue properties of cement paste at the microscale. A strong size dependence is found for the flexural fatigue life of the cement paste specimen. Microscopic observations on the fractured surfaces suggest that there is a higher density of nano-scale cracks generated during the fatigue...journal article 2021
- document
-
Xu, Y. (author), Zhang, H. (author), Gan, Y. (author), Šavija, B. (author)Cementitious materials are widely used in construction. For their low ductility, they typically need to be reinforced by steel rebars, which cause potential corrosion problems. Polymeric reinforcement, which does not have corrosion problems, has been used to replace steel rebars. However, a relatively high reinforcing ratio is usually...journal article 2021
- document
-
Zhang, H. (author), Xu, Y. (author), Gan, Y. (author), Chang, Z. (author), Schlangen, E. (author), Šavija, B. (author)Application of micromechanical modelling of hydrated cement paste (HCP) gains more and more interests in the field of cementitious materials. One of the most promising approaches is the use of so-called microstructure informed micromechanical models, which provides a direct link between microstructure and mechanical properties. In order to...journal article 2020
- document
-
Zhang, H. (author), Xu, Y. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)This paper presents a validation process of the developed multi-scale modelling scheme on mortar composites. Special attention was paid to make the material structure of real and virtual mortar specimens comparable at the meso-scale. The input mechanical parameters of cement paste (both bulk cement paste and interfacial transition zone) at the...journal article 2020
- document
-
Chen, Y. (author), Jansen, K. (author), Zhang, H. (author), Romero Rodriguez, C. (author), Gan, Y. (author), Copuroglu, Oguzhan (author), Schlangen, E. (author)For a single batch material, time intervals and nozzle standoff distances between two subsequent layers are two critical printing parameters that influence the mechanical performance of the printed concrete. This paper presents an experimental and numerical study to investigate the impacts of these printing parameters on the interlayer bond...journal article 2020
- document
-
Zhang, H. (author), Romero Rodriguez, C. (author), Dong, H. (author), Gan, Y. (author), Schlangen, E. (author), Šavija, B. (author)Carbonation of hydrated cement paste (HCP) causes numerous chemo-mechanical changes in the microstructure, e.g., porosity, strength, elastic modulus, and permeability, which have a significant influence on the durability of concrete structures. Due to its complexity, much is still not understood about the process of carbonation of HCP. The...journal article 2020
- document
-
Gan, Y. (author), Vandamme, Matthieu (author), Zhang, Hongzhi (author), Chen, Y. (author), Schlangen, E. (author), van Breugel, K. (author), Šavija, B. (author)This study proposes an experimental method for studying the short-term creep behaviour of cement paste at micro-scale. The micro-bending tests on miniaturized cantilever beams were used to characterize the viscoelastic properties of cement paste. The effects of w/b ratio, the type of binder and the stress level on the microscopic creep...journal article 2020
- document
-
Gan, Y. (author), Zhang, H. (author), Šavija, B. (author), Schlangen, E. (author), van Breugel, K. (author)Nanoindentation is usually used to investigate local elastic properties and hardness of materials. In this paper, the nanoindenter served as a loading tool to perform micro scale bending tests and measure the global response of micro-scale specimens. For testing, cement paste cantilever beams with a square cross-section of 300 μm × 300 μm were...conference paper 2019
- document
-
Zhang, H. (author), Xu, Y. (author), Gan, Y. (author), Chang, Z. (author), Schlangen, E. (author), Šavija, B. (author)The aim of this work is to investigate the mechanical performance of hardened cement paste (HCP) under compression at the micrometre length scale. In order to achieve this, both experimental and numerical approaches were applied. In the experimental part, micrometre sized HCP specimens were fabricated and subjected to uniaxial compression by...journal article 2019
- document
-
Zhang, H. (author), Gan, Y. (author), Xu, Y. (author), Zhang, Shizhe (author), Schlangen, E. (author), Šavija, B. (author)The aim of this work is to predict the micromechanical properties of interfacial transition zone (ITZ) by combining experimental and numerical approaches. In the experimental part, hardened cement paste (HCP) cantilevers (200 μm × 100 μm × 100 μm) attached to a quartzite aggregate were fabricated and tested using micro-dicing saw and...journal article 2019
- document
-
Gan, Y. (author), Zhang, H. (author), Šavija, B. (author), Schlangen, E. (author), van Breugel, K. (author)Cement paste is the main binding component in concrete and thus its fundamental properties are of great significance for understanding the fracture behaviour as well as the ageing process of concrete. One major aim of this paper is to characterize the micromechanical properties of cement paste with the aid of a nanoindenter. Besides, this paper...journal article 2018
Pages
- 1
- 2