Searched for: +
(41 - 60 of 87)

Pages

document
Xu, Junzhong (author), Gao, Fei (author), Soeiro, Thiago B. (author), Chen, Linglin (author), Tarisciotti, Luca (author), Tang, Houjun (author), Bauer, P. (author)
In the applications of three-phase two-level voltage source inverters (VSIs) relatively large energy storage capacitors are used to absorb the high DC-link current ripples mainly caused by the circulating reactive power, the switched AC phase current flowing to the DC-link, and other dynamic and/or asymmetric operating conditions. Especially for...
conference paper 2020
document
Xu, Luyan (author), Zhou, Xuan (author), Gadiraju, Ujwal (author)
Studies in searching as learning (SAL) have revealed that user knowledge gain not only manifests over a long-term learning period, but also occurs in single short-term web search sessions. Though prior works have shown that the knowledge gain of collaborators can be influenced by user demographics and searching strategies in long-term...
conference paper 2020
document
Xu, Luyan (author), Zhou, Xuan (author), Gadiraju, Ujwal (author)
Search tasks provide a medium for the evaluation of system performance and the underlying analytical aspects of IR systems. Researchers have recently developed new interfaces or mechanisms to support vague information needs and struggling search. However, little attention has been paid to the generation of a unified task set for evaluation...
conference paper 2020
document
Wang, Tan (author), Hanjalic, A. (author), Xu, Xing (author), Shen, Heng Tao (author), Yang, Yang (author), Song, Jingkuan (author)
A major challenge in matching images and text is that they have intrinsically different data distributions and feature representations. Most existing approaches are based either on embedding or classification, the first one mapping image and text instances into a common embedding space for distance measuring, and the second one regarding...
conference paper 2019
document
Ying, Shen (author), Xu, Yifan (author), Li, Chengpeng (author), Guo, Ren Zhong (author), Li, Lin (author)
An Easement is a kind of usufructuary right, and its main purpose is that one party wants to use the property of others to improve the benefits and interests of his own real estate. With increasing population and accelerating urbanization, the limitation of urban space has gradually become prominent problem. To use the spatial resources fully,...
conference paper 2019
document
Mercuri, L. (author), Romero Rodriguez, C. (author), Xu, Y. (author), Chaves Figueiredo, S. (author), Mors, R.M. (author), Rossi, E. (author), Anglani, G. (author), Antonaci, P. (author), Šavija, B. (author), Schlangen, E. (author)
Soft inclusions, such as capsules and other particulate admixtures are increasingly being used in cementitious materials for functional purposes (i.e. self-healing and self-sensing of concrete). Yet, their influence on the fracture behaviour of the material is sometimes overlooked and requires in-depth study for the optimization of mechanical...
conference paper 2019
document
Xu, Y. (author), Schlangen, E. (author), Šavija, B. (author)
Strain hardening cementitious composites are a class of cementitious materials showing metal-like (i.e. pseudo-plastic) behavior in tension due to their multiple cracking ability. This is commonly achieved through use of fiber reinforcement (such as PVA) or, similarly, textile reinforcement (TRC). Increasing the ductility is important in...
conference paper 2019
document
Xu, Y. (author), Šavija, B. (author), Schlangen, E. (author)
Traditionally, mechanical properties of cementitious materials are designed<br/>“chemically”, namely by configuring their mix proportions. Owning to the development of 3D printing technology, “physical” tailoring the meso-structure of cementitious materials to design their mechanical properties becomes possible. In the present study,...
conference paper 2019
document
Huigen, Vincent (author), Xu, Y. (author), Schlangen, E. (author), Šavija, B. (author)
In order to improve the behaviour of cementitious material under in bending, 3D printed polymeric lattice meshes were used as an alternative to fibre reinforcement. Lattice meshes with different cell sizes and different surface roughness were designed and printed. Plain mortar samples and reinforced samples were casted. After curing, 4-point...
conference paper 2018
document
Xu, S. (author), Yarovoy, Alexander (author)
This paper investigates the joint range, Doppler and Direction-of-Arrival (DOA) estimation with a wideband phased array in the presence of phase residual which brought by the range-Doppler couplings. 3D MUSIC algorithm is adopted and a compensation approach is proposed to eliminate the influence of the phase residual on the estimation...
conference paper 2018
document
Xu, S. (author), Wang, J. (author), Yarovoy, Alexander (author)
Radar imaging using ultra-wideband (UWB) automotive radar is investigated. To overcome poor cross-range resolution of traditional beamforming (BF) algorithms, super resolution technique is applied for the Direction of Arrival (DOA) estimation. Both super-resolution algorithm and conventional BF method are used to process experimental data...
conference paper 2018
document
Xu, L. (author), Huijsing, J.H. (author), Makinwa, K.A.A. (author)
This paper presents a fully integrated ±4A current sensor that supports a 25V input common-mode voltage range (CMVR) while operating from a single 1.5V supply. It consists of an on-chip metal shunt, a beyond-the-rails ADC [1] and a temperature-dependent voltage reference. The beyond-the-rails ADC facilitates high-side current sensing without...
conference paper 2018
document
Xu, Jiawei (author), Lin, Qiuyang (author), DIng, Ming (author), Liu, Y. (author), Van Hoof, Chris (author), Serdijn, W.A. (author), Van Helleputte, Nick (author)
Simultaneous measurement of Electrocardiogram (ECG) and bio-impedance (BioZ) via disposable health patches is desired for patients suffering from chronic cardiovascular and respiratory diseases. However, a sensing IC must consume ultra-low power under a sub-volt supply to comply with miniaturized and disposable batteries. This work presents...
conference paper 2018
document
Xu, S. (author), Liu, X. (author), Tabakovic, A. (author), Schlangen, E. (author)
Incorporating self-healing technology in asphalt pavement has been demonstrated to have great potential to prolong its service life. To this aim, the calcium alginate capsules encapsulating rejuvenator were manufactured and proved to have sufficient thermal stability and mechanical resistance to survive the asphalt production and compaction...
conference paper 2018
document
Sun, Zhu (author), Yang, J. (author), Zhang, J. (author), Bozzon, A. (author), Huang, Long Kai (author), Xu, Chi (author)
Knowledge graphs (KGs) have proven to be effective to improve recommendation. Existing methods mainly rely on hand-engineered features from KGs (e.g., meta paths), which requires domain knowledge. This paper presents RKGE, a KG embedding approach that automatically learns semantic representations of both entities and paths between entities...
conference paper 2018
document
Sun, Zhu (author), Yang, J. (author), Zhang, Jie (author), Bozzon, A. (author), Chen, Yu (author), Xu, Chi (author)
Representation learning (RL) has recently proven to be effective in capturing local item relationships by modeling item co-occurrence in individual user's interaction record. However, the value of RL for recommendation has not reached the full potential due to two major drawbacks: 1) recommendation is modeled as a rating prediction problem...
conference paper 2017
document
Xu, Man (author), Wei, S. (author), Zlatanova, S. (author), Zhang, Ruiju (author)
At present, 87 % of people's activities are in indoor environment; indoor navigation has become a research issue. As the building structures for people's daily life are more and more complex, many obstacles influence humans' moving. Therefore it is essential to provide an accurate and efficient indoor path planning. Nowadays there are many...
conference paper 2017
document
Xu, J. (author), Buşoniu, Lucian (author), De Schutter, B.H.K. (author)
We consider the infinite-horizon optimal control of discrete-time, Lipschitz continuous piecewise affine systems with a single input. Stage costs are discounted, bounded, and use a 1 or ∞-norm. Rather than using the usual fixed-horizon approach from model-predictive control, we tailor an adaptive-horizon method called optimistic planning for...
conference paper 2017
document
Xu, T. (author), Hu, Y. (author), Zhang, Bingbing (author), Leus, G.J.T. (author)
Since the global positioning system (GPS) is not applicable underwater, source localization using wireless sensor networks (WSNs) is gaining popularity in oceanographic applications. Unlike terrestrial WSNs (TWSNs) which uses electromagnetic signaling, underwater WSNs (UWSNs) require underwater acoustic (UWA) signaling. Received signal strength ...
conference paper 2016
document
Lu, Q. (author), Xu, W. (author), Van der Zwaag, S. (author)
We report a computational 'alloy by design' approach which can significantly accelerate the design process and substantially reduce the development costs. This approach allows simultaneously optimization of alloy composition and heat treatment parameters based on the integration of thermodynamic, thermo-kinetics and a genetic algorithm...
conference paper 2016
Searched for: +
(41 - 60 of 87)

Pages