Outdoor corrosion testing of aluminium-lithium alloys

Outdoor corrosion and stress corrosion tests were conducted on Al-Li plate and sheet materials for 3 and almost 5 years respectively. The results can be summarized as follows: Corrosion: Peak aged XXXA-T651 (8090-T651) exhibited greater exfoliation corrosion resistance than 2024-T351 and 2324-T39 plate. 2091-T3 and 2024-T3 sheet were found to be...

Crack resistance, fracture toughness and instability in damage tolerant Al-Li alloys

A comparison is made of the crack resistance (R-curve), fracture toughness and instability behaviour of candidate damage tolerant aluminiumlithium alloys, 2091 and 8090, and the widely used conventional 2024-T3 alloy. The 2091 alloy was in three heat treatment conditions, T8X, TX and TY, all artificially aged. The 8090 alloy was in the T81...

Effects of cooling rate on corrosion properties of high strength aluminium alloys under atmospheric conditions

Long-term outdoor exposure tests were done to investigate the effect of cooling rate on corrosion and stress corrosion properties of extruded rods of the high strength aluminium alloys 2024-T4, 2023-T6, 7075-T6 and 7075-T73. The 2024 alloy exhibited a high susceptibility to SCC irrespective of best treatment and cooling rate, whereas 7075-T6 was...

Engineering property comparisons for 2324-T39 and 2024-T351 aluminium alloy plate

Engineering property comparisons have been made for plate material of the newly developed aluminium alloy 2324-T39 and the widely used alloy 2024-T351. The properties considered were: tensile strength, fracture toughness, notched fatigue strength, and the resistance to fatigue crack propagation under both constant amplitude and flight simulation...

Supplementary residual strength investigation of the aluminium alloy 7475-T76

Some residual strength tests have been performed on 610 mm wide centre-cracked panels at a temperature of -50 C, in order to examine whether equal Ke values are obtained as for 300 mm wide panels, tested at -50°C. This work is a continuation of the residual strength investigation reported in NLR TR 76103 and NLR TR 75168.

Fracture toughness and fatigue properties of the new aluminium alloy 7475-T76

Residual strength tests have been performed on 610 mm wide centre cracked panels. During the tests, stable crack growth was filmed and crack opening displacements were measured. Fracture toughness was determined using the method of Feddersen. Flight simulation fatigue tests were carried out to investigate the crack propagation properties. A...