Delamination growth in improved carbon composites under constant amplitude fatigue loading

Constant amplitude tension-compression fatigue tests were performed on notched (± 45, 02, 90, 02)s coupon specimens of the composite systems T300/F593, T400H/6376, T800H//5245C and IM6/APC-2. Delamination damage growth as a function of the number of fatigue cycles was determined using the ultrasonic C-scan technique. Considering the resistance...

Engineering property comparisons for 2324-T39 and 2024-T351 aluminium alloy plate

Engineering property comparisons have been made for plate material of the newly developed aluminium alloy 2324-T39 and the widely used alloy 2024-T351. The properties considered were: tensile strength, fracture toughness, notched fatigue strength, and the resistance to fatigue crack propagation under both constant amplitude and flight simulation...

Residual strength of (0, ±45)s and (±45, 0)s carbon/epoxy laminates

Residual strength properties of carbon/epoxy composite material

Fatigue tests on unidirectional Ca/ep composite material have been performed to investigate whether previous fatigue loading did influence the residual static strength. Residual strength tests were carried out on (0, ± 45)2s and (± 45)2s laminates, while for the (O, ± 45)2s laminate the influence of previous tensile fatigue loading on the...

Residual strength of the aluminium alloy 7475-T76 at low temperatures

Residual strength tests have heen performed, on 300 mm wide centrecracked panels of various thicknesses, at room temperature and at -50 C. During the tests, stable crack growth was filmed and recorded with the electric potential method. Fracture toughness was determined using the method of Feddersen.

Supplementary residual strength investigation of the aluminium alloy 7475-T76

Some residual strength tests have been performed on 610 mm wide centre-cracked panels at a temperature of -50 C, in order to examine whether equal Ke values are obtained as for 300 mm wide panels, tested at -50°C. This work is a continuation of the residual strength investigation reported in NLR TR 76103 and NLR TR 75168.

Fracture toughness and fatigue properties of the new aluminium alloy 7475-T76

Residual strength tests have been performed on 610 mm wide centre cracked panels. During the tests, stable crack growth was filmed and crack opening displacements were measured. Fracture toughness was determined using the method of Feddersen. Flight simulation fatigue tests were carried out to investigate the crack propagation properties. A...