Searched for: +
(1 - 20 of 21)

Pages

List view
Grid view
document
Boogaard, Bob (author), Tas, Ali (author), Nijssen, J.P.A. (author), Broeren, F.G.J. (author), van den Dobbelsteen, J.J. (author), Verhoeven, Vincent (author), Pluim, Jip (author), Dekker, Sing (author), Snijder, Eric J. (author), van Hemert, Martijn J. (author), Herfst, Sander (author)
The SARS-CoV-2 pandemic resulted in shortages of production and test capacity of FFP2-respirators. Such facemasks are required to be worn by healthcare professionals when performing aerosol-generating procedures on COVID-19 patients. In response to the high demand and short supply, we designed three models of facemasks that are suitable for...
journal article 2021
document
Kluba, M.M. (author), Li, J. (author), Parkkinen, Katja (author), Louwerse, Marcus (author), Snijder, Jaap (author), Dekker, R. (author)
Several Silicon on Insulator (SOI) wafer manufacturers are now offering products with customer‐defined cavities etched in the handle wafer, which significantly simplifies the fabrication of MEMS devices such as pressure sensors. This paper presents a novel cavity buried oxide (BOX) SOI substrate (cavity‐BOX) that contains a patterned BOX...
journal article 2021
document
Mountain, Christopher (author), Kluba, M.M. (author), Bergers, L.I.J.C. (author), Snijder, Jaap (author), Dekker, R. (author)
Accurate alignment between the cavities in cavity-SOI (c-SOI) wafers and lithography on the wafer surface is essential to advanced MEMS production. Existing alignment methods are well defined, but often require specialized equipment or costly software packages available only in professional manufacturing environments. It would be beneficial...
journal article 2019
document
Snijder, A.H. (author), van der Linden, L.P.L. (author), Goulas, C. (author), Louter, P.C. (author), Nijsse, R. (author)
The majority of glass used in load-bearing structures is as planar elements. Some projects exist that use linear glass elements. This paper discusses in broad terms the design, engineering, and fabrication of a unique vector active glass structure consisting of glass bundles and partly printed steel connections. A structure was conceived that...
journal article 2019
document
Snijder, A.H. (author), Nijsse, R. (author), Louter, P.C. (author)
A Glass Truss Bridge has been constructed on the Green Village on the campus of Delft University of Technology (TU Delft) by the Glass & Transparency Research group (faculties of Architecture and CiTG). The bridge has been fitted with as many glass components as was structurally feasible, showcasing the group’s research into the structural...
journal article 2018
document
Krousti, Alkistis (author), Snijder, A.H. (author), Turrin, M. (author)
The purpose of this paper, as part of a MSc graduation project, has been to explore to which extent the kinematic potential of folded geometries can benefit from the structural and architectural properties of glass plates. Using as a case study the covering in an adjustable way an outdoor swimming pool area, the course of this paper consists of...
conference paper 2018
document
Snijder, A.H. (author), Nijsse, R. (author), Louter, P.C. (author)
On the campus of Delft University the Glass and Transparency Research Group is preparing to build a pedestrian bridge as a low arch consisting of dry-stacked glass blocks. As temporary support for the arch, a lens-shaped truss has been constructed and placed on location. This truss has been fitted with as many glass components as was...
conference paper 2018
document
Bristogianni, T. (author), Oikonomopoulou, F. (author), Veer, F.A. (author), Snijder, A.H. (author), Nijsse, R. (author)
A pedestrian glass bridge, located at the TU Delft campus site, is being designed by the TU Delft Glass & Transparency Lab. Specifically, the arch-formed bridge consists of cast glass, dry-assembled, interlocking components. To validate the shape of the components, glass mock-ups in 1:2 scale are kiln-cast and tested. This paper follows the...
conference paper 2017
document
Snijder, A.H. (author), Kamerling, M.W. (author), Padmos, J. (author), Padmos, E. (author)
conference paper 2015
document
Steenhuis, C.M. (author), Vrouwenvelder, A.C.W.M. (author), Van Herwijnen, F. (author), Snijder, H.H. (author)
Resistance, stiffness and deformation capacity are three characteristics describing the behaviour of (statically loaded) structures. The stiffness relates mostly to the serviceability of the structure. The resistance and deformation capacity relate to the safety of the structure. Nowadays, the safety of structures is checked explicitly with help...
journal article 2002
document
Snijder, J. (author)
The drill head consists of a pointed end with cutting edges (5) on the ends of the flutes (3). The endface of the drill head, opposite the pointed end, incorporates a central blind hole (6). A separate drill shaft (2) has a cylindrical protrusion at its end which fits into the hole in the drill head to which it is attached by hard soldering. The...
patent 1998
document
Boon, L. (author), Snijder, M. (author)
Document(en) uit de collectie Chemische Procestechnologie
report 1993
document
van Spronsen, J.C. (author), Snijder, H.H. (author), Bijlaard, F.S.K. (author), Wardenier, J. (author), Witteveen, J. (author)
report 1990
document
Dijkstra, O.D. (author), van Rongen, H.J.M. (author), Snijder, H.H. (author)
report 1989
document
Dijkstra, O.D. (author), Snijder, H.H. (author), Overbeeke, J.L. (author), Wildschut, H. (author), Scholte, H.G. (author)
report 1988
document
Hoorn, H.J. (author), Dijkstra, O.D. (author), Snijder, H.H. (author), Wardenier, J. (author)
report 1988
document
van Delft, D.R.V. (author), Dijkstra, O.D. (author), Snijder, H.H. (author)
report 1985
document
Snijder, M.J.H. (author)
master thesis 1985
document
Schijve, J. (author), Snijder, J. (author)
report 1981
document
Vreeswijk, J.J. (author), Snijder, P.J. (author)
Document uit de collectie Chemische Procestechnologie.
report 1974
Searched for: +
(1 - 20 of 21)

Pages

List view
Grid view