Searched for: +
(21 - 40 of 161)

Pages

document
Tu, Botao (author), Yang, Xinkui (author), Xu, S. (author), Zhao, Zenggang (author), Zhou, Yuheng (author), Jiang, Jian (author), Fan, Lulu (author), Tu, Liangliang (author)
As a kind of solid waste, using Prestressed High-Strength Concrete Pile Waste Concrete (PPWC) as the replacement for limestone filler in asphalt concrete can not only reduce the accumulation of PPWC and increase its utilization but also avoid the increased road construction costs and environmental degradation associated with limestone mining....
journal article 2023
document
van Velde, P.F. (author), Rieger, B. (author), Hinsdale, T.A. (author), Cnossen, J.P. (author), Fan, D. (author), Hung, S. (author), Grunwald, D. (author), Smith, C.S. (author)
Three dimensional modulation-enhanced single-molecule localization techniques, such as ModLoc, offer advancements in axial localization precision across the entire field of view and axial capture range, by applying phase shifting to the illumination pattern. However, this improvement is limited by the pitch of the illumination pattern that...
journal article 2023
document
Tu, Botao (author), Yang, Xinkui (author), Xu, S. (author), Liang, X. (author), Liu, C. (author), Jiang, Jian (author), Fan, Lulu (author), Tu, Liangliang (author)
Using solid waste to replace limestone filler in asphalt concrete can not only reduce the cost of road construction, but also improve the utilization rate of solid waste. In this study, PHC pile waste concrete (PPWC) was innovatively used to replace limestone filler in asphalt mixture and its effect on the physical and rheological properties...
journal article 2023
document
Li, Wenyu (author), Chen, Wei (author), Jiang, Jing (author), Tang, H. (author), Fan, J. (author)
Double-sided packages for heat dissipation are an efficient thermal management mechanism for power semiconductor devices. A fan-out panel-level packaging (FOPLP), as one of the double-sided forms, exhibits excellent electro–thermal characteristics and provides low stray inductance and thermal resistance. Besides, the temperature at each point...
journal article 2023
document
Wang, Hanyu (author), Chen, Dengkai (author), Huang, Y. (author), Zhang, Yahan (author), Qiao, Yidan (author), Xiao, Jianghao (author), Xie, Ning (author), Fan, Hao (author)
This study aimed to enhance the real-time performance and accuracy of vigilance assessment by developing a hidden Markov model (HMM). Electrocardiogram (ECG) signals were collected and processed to remove noise and baseline drift. A group of 20 volunteers participated in the study. Their heart rate variability (HRV) was measured to train...
journal article 2023
document
Huang, Y. (author), Yu, Suihuai (author), Chu, Jianjie (author), Su, Zhaojing (author), Zhu, Yaokang (author), Wang, Hanyu (author), Wang, Mengcheng (author), Fan, Hao (author)
Design knowledge is critical to creating ideas in the conceptual design stage of product development for innovation. Fragmentary design data, massive multidisciplinary knowledge call for the development of a novel knowledge acquisition approach for conceptual product design. This study proposes a Design Knowledge Graph-aided (DKG-aided)...
journal article 2023
document
Fan, D. (author), Cnossen, J.P. (author), Hung, S. (author), Kromm, D. (author), Dekker, N.H. (author), Verbiest, G.J. (author), Smith, C.S. (author)
To better understand the interactions between biological molecules, a high optical resolution in all three dimensions is crucial. The intrinsically lower axial resolution of microscopes however, is a limiting factor in fluorescence imaging, correspondingly in fluorescence based single molecule localization microscopy (SMLM). Here, we present...
journal article 2023
document
Hu, D. (author), Qian, Cheng (author), Liu, X. (author), Du, L. (author), Sun, Zhongchao (author), Fan, X. (author), Zhang, Kouchi (author), Fan, J. (author)
As a promising technology for high-power and high-temperature power electronics packaging, nanocopper (nanoCu) paste sintering has recently received increasing attention as a die-attachment. The high-temperature deformation of sintered nanoCu paste and its underlying mechanisms challenge the reliability of high-power electronics packaging. In...
journal article 2023
document
Wang, Xinyue (author), Yang, Zhoudong (author), Wang, Boya (author), Chen, Wei (author), Zhang, Kouchi (author), Zhang, Jing (author), Fan, J. (author), Liu, P. (author)
Power modules applied in offshore applications are facing risks of corrosion failures on die-attach materials due to high humidity and H<sub>2</sub>S exposure. To investigate such corrosion behavior for sintered die-attach materials, we conducted a study with four groups of samples fabricated using copper and silver metal particles under...
journal article 2023
document
Jouyaeian, A. (author), Fan, Q. (author), Ausserlechner, Udo (author), Motz, Mario (author), Makinwa, K.A.A. (author)
This article presents a hybrid magnetic current sensor for contactless current measurement. Pick-up coils and Hall plates are employed to sense the high and low-frequency fields, respectively, generated by a current-carrying conductor. Due to the differentiating characteristic of the pick-up coils, a flat frequency response can then be...
journal article 2023
document
Ying, Shen (author), van Oosterom, P.J.M. (author), Fan, Hongchao (author)
The recent years observe the vast development in new techniques and methods for modelling, visualization, and analysis of 3D digital cities, as the need of digital twins of urban environment in different applications and simulations has been increased dramatically. This special issue attempts to give an overview of the recent progress and...
journal article 2023
document
Hu, D. (author), Shah, M.B. (author), Fan, J. (author), Vollebregt, S. (author), Zhang, Kouchi (author)
Driving by the increased demand for hermetic packaging in the more than Moore (MtM) roadmap, a Cu nanoparticle sintering-enabled hermetic sealing solution was developed with a small-size sealing ring. The developed technology simplifies microfabrication and requires less surface roughness using a sinterable Cu nanoparticle paste. A 50μm size...
journal article 2023
document
Huang, Y. (author), Yu, S. Suihuai (author), Chu, J. Jianjie (author), Fan, H. Hao (author), Du, B. Bin (author)
Cultural heritage management poses significant challenges for museums due to fragmented data, limited intelligent frameworks, and insufficient applications. In response, a digital cultural heritage management approach based on knowledge graphs and deep learning algorithms is proposed to address the above challenges. A joint entity-relation...
journal article 2023
document
Zhang, Yi (author), Si, Chundi (author), Fan, Taotao (author), Zhu, Yuefeng (author), Li, Song (author), Ren, S. (author), Lin, P. (author)
With the increasing awareness of environmental protection and attention to resource reuse, the development of high-performance and degradable green biomass pavement materials attracts a lot of interest. Lignin and bio-oil effectively combined to play a synergistic role can improve various properties of asphalt and partially replace petroleum...
journal article 2023
document
Zhao, Wenzhao (author), Fan, Yuling (author), Wang, Hongjian (author), Gemmeke, Hartmut (author), van Dongen, K.W.A. (author), Hopp, Torsten (author), Hesser, Jürgen (author)
Objective. The image reconstruction of ultrasound computed tomography is computationally expensive with conventional iterative methods. The fully learned direct deep learning reconstruction is promising to speed up image reconstruction significantly. However, for direct reconstruction from measurement data, due to the lack of real labeled...
journal article 2023
document
Yan, Jingye (author), Wu, Ji (author), Gurvits, L. (author), Wu, Lin (author), Deng, Li (author), Zhao, Fei (author), Zhou, Li (author), Lan, Ailan (author), Fan, Wenjie (author)
This paper introduces the first results of observations with the Ultra-Long-Wavelength (ULW) —- Low Frequency Interferometer and Spectrometer (LFIS) on board the selenocentric satellite Longjiang-2. We present a brief description of the satellite and focus on the LFIS payload. The in-orbit commissioning confirmed a reliable operational status...
journal article 2023
document
Wu, B. (author), Lewis, R.W. (author), Li, G. (author), Gao, Yifan (author), Fan, B. (author), Klemm, B. (author), Huang, J. (author), Wang, Junyou (author), Cohen Stuart, Martien A. (author), Eelkema, R. (author)
In the quest for stimuli-responsive materials with specific, controllable functions, coacervate hydrogels have become a promising candidate, featuring sensitive responsiveness to environmental signals enabling control over sol-gel transitions. However, conventional coacervation-based materials are regulated by relatively non-specific signals,...
journal article 2023
document
Jouyaeian, A. (author), Fan, Q. (author), Brito Zamparette, R.L. (author), Ausserlechner, Udo (author), Motz, Mario (author), Makinwa, K.A.A. (author)
This article presents a hybrid magnetic current sensor for galvanically isolated measurements. It consists of a CMOS chip that senses the magnetic field generated by current flowing through a lead-frame-based current rail. Hall plates and coils are used to sense low-frequency (dc to 10 kHz) and high-frequency (10 kHz to 5 MHz) magnetic fields...
journal article 2023
document
Tsan, Vi hung (author), Fan, D. (author), Caneva, S. (author), Smith, C.S. (author), Verbiest, G.J. (author)
A low-cost glass-based microfluidic flow cell with a piezo actuator is built using off-the-shelf parts (total cost €9 per device) to apply acoustophoretic force on polystyrene micro-beads. The main challenge in the fabrication of these devices was to ensure their leak tightness, which we solved using double-sided tape and nail polish. Beads...
journal article 2023
document
Cui, Z. (author), Fan, X. (author), Zhang, Y. (author), Vollebregt, S. (author), Fan, J. (author), Zhang, Kouchi (author)
This paper presented integrated electromigration (EM) studies through experiment, theory, and simulation. First, extensive EM tests were performed using Blech and standard wafer-level electromigration acceleration test (SWEAT)-like structures, which were fabricated on four-inch wafers. Second, a molecular dynamics (MD) simulation-based...
journal article 2023
Searched for: +
(21 - 40 of 161)

Pages