Searched for: +
(25,101 - 25,120 of 172,351)

Pages

document
Moyo, Welldone (author), Motsa, Machawe M. (author), Chaukura, Nhamo (author), Msagati, Titus A.M. (author), Mamba, Bhekie B. (author), Heijman, Sebastiaan (author), Nkambule, Thabo T.I. (author)
This work presents the first comprehensive investigation of natural organic matter (NOM) fraction removal using ceramic membranes in South Africa. The rate of removal of bulk NOM (measured as UV<sub>254</sub> and DOC % removal), the biodegradable dissolved organic carbon (BDOC) fraction, polarity-based fractions, and fluorescent dissolved...
journal article 2022
document
Staničić, Aleksandar (author), Jelic, Andrea (author)
In this interview article, we present a unique marriage of architecture heritage design and fundamental philosophy exemplified in the built works by Rietveld Architecture-Art-Affordances (RAAAF), a studio that works at the intersection of visual art, experimental architecture, and philosophy based in Amsterdam, The Netherlands. The conversation...
journal article 2022
document
Garcia Rea, V.S. (author), Muñoz Sierra, Julian (author), Elkalliny, A.S.M. (author), Cerqueda-García, Daniel (author), Lindeboom, R.E.F. (author), Spanjers, H. (author), van Lier, J.B. (author)
Phenol conversion under saline thermophilic anaerobic conditions requires the development and sustenance of a highly specialized microbial community. In the present research, an anaerobic membrane bioreactor (AnMBR) fed with an influent containing 0.5 g·L<sup>−1</sup> phenol and 6.5 gNa<sup>+</sup>·L<sup>−1</sup> was operated at 55 °C for 300...
journal article 2022
document
Andrew, Philippa Kate (author), Raudsepp, Allan (author), Nock, Volker (author), Fan, D. (author), Williams, Martin A.K. (author), Staufer, U. (author), Avci, Ebubekir (author)
Optical micromachines have the potential to improve the capabilities of optical tweezers by amplifying forces and allowing for indirect handling and probing of specimens. However, systematic design and testing of micromachine performance is still an emerging field. In this work we have designed and tested an unsupported microlever, suitable for...
conference paper 2022
document
Hulskemper, D. (author), Anders, K. (author), Antolínez, José A. Á. (author), Kuschnerus, M. (author), Höfle, B. (author), Lindenbergh, R.C. (author)
The Earth's landscapes are shaped by processes eroding, transporting and depositing material over various timespans and spatial scales. To understand these surface activities and mitigate potential hazards they inflict (e.g., the landward movement of a shoreline), knowledge is needed on the occurrences and impact of these activities. Near...
journal article 2022
document
Meinderts, J. P. (author), Lindenbergh, R.C. (author), Van Der Heide, D. H. (author), Amiri Simkooei, A. (author), Truong-Hong, Linh (author)
This paper introduces a method to automatically estimate vertical and horizontal clearances of highway viaducts and gantries from Mobile Laser Scanner (MLS) point clouds. It is essential to have accurate data on the vertical and horizontal clearances of overhead infrastructure objects along the highway. Accurate clearance data is used for...
journal article 2022
document
Plomp, E. (author), Stantis, Chris (author), James, Hannah F. (author), Cheung, Christina (author), Snoeck, Christophe (author), Kootker, Lisette (author), Kharobi, Arwa (author), Borges, Caroline (author), Moreiras Reynaga, Diana K. (author)
contribution to periodical 2022
document
Mazala, Diego (author), Esperança, Claudio (author), Marroquim, Ricardo (author)
Designing realistic tridimensional facial models is a challenging task, not only due to the effort and artistic abilities required but also because human visual perception is very tuned to the processing of facial features. For this reason, rather than creating face models from scratch, artists usually start from a scanned model of a real...
journal article 2022
document
Koriche, Sifan A. (author), Singarayer, Joy S. (author), Cloke, Hannah L. (author), Valdes, Paul J. (author), Wesselingh, Frank P. (author), Kroonenberg, S.B. (author), Wickert, Andrew D. (author), Yanina, Tamara A. (author)
Quaternary Caspian Sea level variations depended on geophysical processes (affecting the opening and closing of gateways and basin size/shape) and hydro-climatological processes (affecting water balance). Disentangling the drivers of past Caspian Sea level variation, as well as the mechanisms by which they impacted the Caspian Sea level...
journal article 2022
document
Simionato, Greta (author), Rabe, Antonia (author), Gallego Murillo, Joan Sebastián (author), van der Zwaan, Carmen (author), Hoogendijk, A. J. (author), van den Biggelaar, Maartje (author), Minetti, Giampaolo (author), Bogdanova, Anna (author), Mairbäurl, Heimo (author)
Hypoxia is associated with increased erythropoietin (EPO) release to drive erythropoiesis. At high altitude, EPO levels first increase and then decrease, although erythropoiesis remains elevated at a stable level. The roles of hypoxia and related EPO adjustments are not fully understood, which has contributed to the formulation of the theory...
journal article 2022
document
Xia, Yi (author), Langelaar, Matthijs (author), Hendriks, M.A.N. (author)
Strut-and-Tie modelling (STM) has been widely applied to design D-regions of reinforced concrete structures. For economic and environmental reasons there is a need for optimized Strut-and-Tie models. How to optimize Strut-and-Tie models considering multiple load combinations has not been investigated extensively in the literature. In order to...
journal article 2022
document
Kalita, Alakesh (author), Brighente, Alessandro (author), Khatua, Manas (author), Conti, M. (author)
The 6TiSCH standard provides minimum latency and reliability in mission-critical IoT applications. To optimize resource allocation during 6TiSCH network formation, IETF released the 6TiSCH minimal configuration (6TiSCH-MC) standard. 6TiSCH-MC considered IETF's IPv6 Routing Protocol for Low power and Lossy network (RPL) as a routing protocol...
journal article 2022
document
Suzuki, T. (author), Hu, Zhan (author), Kumada, Kenji (author), Phan Khanh, L. (author), Zijlema, Marcel (author)
The authors regret that there was a typo in Equation (14b). 
journal article 2022
document
le Poole, J.J. (author), Duchateau, E.A.E. (author), van Oers, B.J. (author), Hopman, J.J. (author), Kana, A.A. (author)
Generating detailed warship layouts is crucial to check technical feasibility and performance consistent with emergent requirement elucidation during early stage design. However, generating feasible detailed layouts is a complex and time consuming task. Even today, detailed layout plans are often manually drawn using CAD software, taking up...
journal article 2022
document
Hanssen, J.L.J. (author), van Prooijen, Bram (author), Volp, Nicolette Dominique (author), de Vet, P.L.M. (author), Herman, P.M.J. (author)
Although tidal flats appear homogeneous from a distance, morphological variations are found on various spatial scales. These are driven by physical and/or biological processes. In this paper, we consider the creeks that are present on fringing tidal flats and which are orientated approximately perpendicular to the main channel. To explain why...
journal article 2022
document
Skvortsova, Aleksandrina (author), Cohen Rodrigues, Talia (author), de Buisonjé, David (author), Kowatsch, Tobias (author), Santhanam, Prabhakaran (author), Veldhuijzen, Dieuwke S. (author), van Middendorp, Henriët (author), Evers, A.W.M. (author)
BACKGROUND: eHealth interventions have the potential to increase the physical activity of users. However, their effectiveness varies, and they often have only short-term effects. A possible way of enhancing their effectiveness is to increase the positive outcome expectations of users by giving them positive suggestions regarding the...
journal article 2022
document
Guo, Yuanyuan (author), Wang, Quan (author), LI, H. (author), Gao, Yixun (author), Xu, Xuezhu (author), Tang, Biao (author), Yang, B. (author), Lee, Yi Kuen (author), French, P.J. (author)
Fluorescent patterns with multiple functions enable high-security anti-counterfeiting labels. Complex material synthesis and patterning processes limit the application of multifunctional fluorescent patterns, so the technology of in situ fluorescent patterning with tunable multimodal capabilities is becoming more necessary. In this work, an...
journal article 2022
document
Romero, José Luis (author), van Velthoven, J.T. (author), Voigtlaender, Felix (author)
We derive an extension of the Walnut–Daubechies criterion for the invertibility of frame operators. The criterion concerns general reproducing systems and Besov-type spaces. As an application, we conclude that L<sup>2</sup> frame expansions associated with smooth and fast-decaying reproducing systems on sufficiently fine lattices extend to...
journal article 2022
document
Stegeman, B. (author), Hoffmann, Rob (author), Hopman, Victor (author), Langeveld, J.G. (author), Clemens-Meyer, Franҫois (author)
The main application of the mobile geo-electrical measurement is the detection of the presence and determining the location of leakage in sewer systems. To do so, this method relies on the increase in the measured electrical current between an electrode inside and an electrode outside the sewer system. To use this technique for the...
journal article 2022
document
Ganborena, Larraitz (author), Gonzalez Garcia, Y. (author), Özkaya, Berkem (author), García, Marta (author), García-Lecina, Eva (author), Vega, Jesús Manuel (author)
The corrosion mechanism of microporous nickel-chromium multilayer coatings was studied at localised scale by Scanning Electrochemical Microscopy (SECM) after exposure to an aggressive electrolyte (chloride-based one at pH 3.1 containing cupric ions). The open circuit potential was initially monitored during 22 h, followed by a detailed...
journal article 2022
Searched for: +
(25,101 - 25,120 of 172,351)

Pages